• Journal of Ocean Engineering and Technology
• /
• v.20 no.4 s.71
• /
• pp.50-57
• /
• 2006

The effect of discharges from the Seomjin River on the dispersion of thermal effluent from the Hadong Power Plant, located along the south coast of Korea, was investigatedusing intensive field observation and three-dimensinal Princeton Ocean Model simulations. A POM and observed CTD data was used to predict the mixing behaviour of the Summer freshet, during the July 2005 intensive observing period. The dispersal of the river discharge anomaly, associated with the Seomjin River plume, was seen to be highly responsive to tidal currents and river flows during the spring tide.

• New & Renewable Energy
• /
• v.5 no.3
• /
• pp.32-39
• /
• 2009

The Samcheonpo ocean small hydropower plant (SHP) has a special feature of using marginal hydraulic head of circulating water system of fossil fuel power plant as a power source and having the characteristics of general hydropower generation and tidal power generation as well. Also, it contributes to reducing green house gases and developing clean energy source by recycling circulating water energy otherwise dissipated into the ocean. The efficiency of small hydropower plant is directly affected by effective head and flow rate of discharged water. Therefore, the efficiency characteristics of ocean hydropower plant are analyzed with the variation of water level and flow rate of discharged water, which is based on the accumulated operation data of the Samcheonpo hydropower plant. After the start of small hydropower plant operation, definite rise of water level was observed. As a result of flow pattern change from free flow to submerged flow, the instability of water surface in overall open channel is increased but it doesn't reach the extent of overflowing channel or having an effect on circulation system. Performance evaluation result shows that the generating power and efficiency of small hydropower exceeds design requirements in all conditions. Analysis results of CWP's water flow rate verify that the amount of flowing water is measured less and the highest efficiency of small hydropower plant is achieved when the effective head has its maximum value. In conclusion, efficiency curve derived from water flow rate considering tidal level shows the best fitting result with design criteria curve and it is verified that overall efficiency of hydropower system is satisfactory.

• Journal of Surface Science and Engineering
• /
• v.51 no.5
• /
• pp.316-324
• /
• 2018

Harsh seawater environment is subdivided into marine atmosphere, splash zone, tidal zone, submerged zone and bottom of sea depending on the exposed part. Since corrosion rate depends on the conditions of the exposed parts, proper protection and maintenance for each parts are essential for long-term use of steel structures in seawater environment. For steel structures which were installed in Shiwha Lake, a special maintenance system is required to guarantee its long-term durability and safety. As the tidal power plant has recently been operated, the salinity has risen due to the rapid influx of seawater upstream into Sihwa Lake and the corrosion tendency of the structure is variable according to the water level fluctuation. In this study, corrosion properties of steel structures under water level fluctuation was evaluated by corrosion rate measurement, visual inspection and natural potential measurement and their durability and life management were discussed in view of the effect of variation in of seawater level fluctuations in Shihwa Lake.

• Ocean and Polar Research
• /
• v.30 no.4
• /
• pp.475-484
• /
• 2008

The word 'Saemangeum' indicates an estuarine tidal flat in the southwestern part of the Korean peninsula. The Saemangeum Reclamation Project was launched as a national project in 1991 to reclaim a large coastal area of $401\;km^2$ by constructing a 33-km long dyke. The final dyke enclosure in April 2006 has transformed the tidal flat into lake and land. An integrated oceanographic study has been conducted since 2002 as a part of the Government Action Plan to monitor and assess changes in the marine environment. Prior to the dyke enclosure, the coastal environment in the Saemangeum was a complex system governed by tidal motion, estuarine processes, and coastal circulation of the Yellow Sea. The dyke construction has radically changed not only the estuarine tidal system inside the dyke, but also the coastal marine environment outside the dyke. Post to the dyke enclosure, subsequent changes such as red tide, hypoxia, and coastal erosion/deposition occur successively. Red tides appear almost the year round in the inner area. Even under the condition that the sluice gates are fully open, the water quality does not improve as much as the developers would expect, mainly due to the critical reduction of the hydrodynamic stirring power. We will introduce details of our monitoring program and significant changes in the Saemangeum marine environment, based on observations and model results.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.1
• /
• pp.90-94
• /
• 2009

The inundation of substation and ground power equipment breaks out every summer season in low-lying downtown and low-lying shore by localized heavy rain, typhoon and tidal wave. For diminishing flood damage of electrical equipment in the root, flood protection system which is used the basic frame of Pad transformer is developed using pneumatic pressure. This system is established on pressure generator equipment and sensor of flooded level operates at flooding occurrence and is maintained a shutting tightly structure. The system is able to protect indraft water in Pad Transformer and supply the electricity at emergency(flooding). And we tested safety for insulation resistance at flooding and applying an electrical current. We estimate that loss cost which is caused by with flooding and the power failure will be diminished if it is addition to advances the reliability evaluation by setting an example.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.582-585
• /
• 2004

Oyster fanning structures in tidal flats are well detected by SAR system. Each frame of these artificial structures is composed of two vertical and one horizontal wooden pole. We investigate characteristics of polarimetric features in the target structures. In this paper, the results of AIRSAR L-band POLSAR data and experiments in laboratory are discussed. The ratio of single bounce to double bounce scattering depends of vertical pole height, direction of horizontal pole to radar look direction, and incidence angle as well as sea surface condition. We have conducted laboratory experiments. According to target scale, Ku-band and targets downsized by scale of 10 are used. The results of the experiments are summarized as: i) total power of the backscattering is more affected by vertical poles than a horizontal pole; ii) and backscattering from a horizontal pole is sensitive to the relative radar look direction to target array. We conclude that water level can be effectively measured by using interferometric phase and backscattering intensity if vertical poles in the water are observed by L-band HH- or VV-polarization. Measurement of tide height can be further improved if double bounced components are separated from fully polarized SAR data.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.1
• /
• pp.73-80
• /
• 2008

An hydraulic experiment was carried out in an open channel flume in order to improve the technique of designing shape of the sluice used for tidal power generation, which greatly affects the economical efficiency of the construction of a tidal power plant. To predict the influence of change in the major design parameters relating to the sluice shape on the water discharge capability of the sluice, it was necessary to perform a precise experiment that is discriminated to previous feasibility studies or design projects. For this purpose, by installing various flow straighteners and rectifying structures inside the water supply system and the rectifying tank, the flow in the flume was stabilized as tranquil as possible. In addition, the measuring instruments and the location of installing them were carefully determined so as to minimize the errors intervened during the measurement of water discharge and water level. The method of estimating head difference between upstream and downstream of the sluice was also developed by taking account of the head loss due to the friction at the bottom and side walls in the flume.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.2
• /
• pp.297-305
• /
• 2014

Nowadays new water supply projects have been on the decline as the water-power constructions have saturated, which means that the existing power equipment have slowly aged and they require more efforts to maintain the system performance. An effective asset management method of power equipment has become a great necessity from both economical and technical aspects. To be balanced, the asset management should look into all three parts: management, engineering, and information. The purpose of this paper is to study a Risk-Based Maintenance (RBM) matrix method through the deterioration evaluation algorithm for an efficient reliability assessment of oil-immersed power transformers by considering both asset management and technical evaluation. Make use of this result, the equipment will be decided to be replace or repair otherwise on service.

• Journal of The Korean Astronomical Society
• /
• v.35 no.3
• /
• pp.123-130
• /
• 2002

An elliptical accretion disk may be formed by tidally disrupted debris of a flying-by star in an active galactic nucleus (AGN) or by tidal perturbation due to a companion in a binary black hole system. We investigate the iron K$\alpha$ line profiles expecting from a geometrically thin, relativistic, elliptical disk in terms of model parameters, and find that a broad and skewed line profile can be reproduced well. Its shape is variable to the model parameters, such as, the emissivity power-law index, the ellipticity of the disk, and the major axis orientation of the elliptical accretion disk. We suggest that our results may be useful to search for such an elliptical disk and consequently the tidal disruption event.

• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.154-156
• /
• 2007

This paper proposes new control method of maximum power point tracking for the seaflow generation system. This control system is performed by using the duty ratio control of DC/DC converter. An advantage of MPPT(Maximum Power Point Tracking)control method presented in this paper is not necessary to use the seaflow turbine characteristic at various seaflow speed and measure the tidal speed and/or the rotation speed of the seaflow generator. Therefore the resulting system ha s the characteristics of lower cost, higher efficiency and lower complexity. The fuzzy controller is used to control the duty ratio of DC/DC converter. So the reactivity and the reliablilty of the generation system is developed. Proposed control method was analyzed mathematically and tested by computer simulation by using Matlab $Simulink^{(R)}$.