• International Journal of Naval Architecture and Ocean Engineering
• /
• v.1 no.2
• /
• pp.57-63
• /
• 2009

Numerical simulations have been carried out on the flooding system of a dry located at the south coasts of Iran. The main goals of seawater flow haracteristics in the intake channels conditions of the flooding system are imposed in the modeling. The upstream boundary condition is the tidal fluctuations of sea water level. At the downstream, the gradually rising water surface elevation in the dry described in a transient boundary condition. The numerical results are compared with available laboratory a good agreement is obtained. The seawater discharge through the flooding system and the required time to filling up the dry dock is determined at the worst case. The water current velocity and pressure on the rigid boundaries are discussed.

• Journal of Wetlands Research
• /
• v.7 no.2
• /
• pp.121-132
• /
• 2005

To classify the surface sedimentary facies using IKONOS image collected over Hwangdo tidal flat in Cheonsu Bay, the optical reflectance was compared for characterizing various sedimentary environments such as grain size, tidal channel pattern and area ratio of surface remnant water. The intertidal DEM (Digital Elevation Model) was generated by echo-sounder for analyzing the relationship between IKONOS image and sedimentary environments including topography. The boundary of the optical reflectance between mud-mixed facies and sand facies was distinct, and discrimination of the associated sandbar feature was also possible. The mud-mixed facies coupled with intricate tidal channels is confined to the relatively hi호 topography of Hwangdo tidal flat. The boundary between mud and mixed flat was indistinct in IKONOS optical reflectance but it would have a difference in the area ratio of surface remnant water. The dark area in the image represented the well developed sand facies having a lot of surface remnant water due to the relatively low surface topography. The overall accuracy of characterizing the surface sediment facies by maximum likelihood classification method was 86.2 %. These results demonstrate that high spatial resolution satellite imagery such as IKONOS coupled with knowledge of grain size, surface remnant water and tidal channel network can be effectively used to characterize the surface sedimentary facies (mud, mixed and sand) network of the tidal flat environments.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.35 no.1
• /
• pp.13-21
• /
• 2023

As problems such as difficulties in securing stable energy resources and global warming due to the emission of greenhouse gases due to the use of fossil fuels have emerged, interest in the development of renewable energy is increasing. Since the tidal phenomenon has a regularity that occurs regularly with a certain period, it is possible to predict accurately in advance, which has a advantage in terms of energy recovery. Therefore, various methods have been devised to utilize the tide as an energy source. Tidal power using barrages is a representative method that is widely operated, but the promotion of tidal power generation projects is being delayed or stopped due to the decrease in the level of water in the tidal basin, changes in water quality and in the ecosystem. In this study, a field experiment was conducted to develop and verify the performance of a tidal power device applicable to sea areas where dykes are already installed. As a result of carrying out four cases of experiments using two water tanks, pipe lines, open channels, weirs, and water turbine and generator, the possibility of developing a power generation system capable of 10 kW output or more and 60% efficiency or more was confirmed. These research results can be used for small-scale tidal power by utilizing the existing dykes.

• Journal of The Geomorphological Association of Korea
• /
• v.18 no.4
• /
• pp.223-233
• /
• 2011

The aims of this study is about distribution characteristics of tidal coastal landforms, and that changing process in the Hampyeung Bay, which has a semi-enclosed bay like basin shape without inflow of stream, the mouth of open sea is narrow and forms with wide ends toward inland sea. The source of deposits are moved materials by tidal currents and from coastal slopes. Main landform elements of study area consist of tidal flat, tidal channels, intertidal sand bar, sea cliffs, and sea terrace. Tidal flats is classified with mud flat and mixed flat by grain size composition. Mud flats have developed at the shoreline area that tidal flat is closed to the continuity of gentle slope, and mixed flat developed at the foot of the sea cliffs and sea terraces. Quaternary deposits were identified in the coastal materials sedimented by the sea-level change. According to the analysis of grain size composition during last ten years, sands and silt has increased 2% and 6% respectively, clay has been decreased by 9%. The concaved tidal flats are colonized by salt plants. Areal changes of salt plants expanded near four times from 2.4km² at the year 2001 to 9.3km² at the year 2009. During the same periods, mean grain size became coarser from 6.5φ to 4.5φ at the salt plants area.

• Korean Journal of Remote Sensing
• /
• v.19 no.2
• /
• pp.117-133
• /
• 2003

A field survey and Landsat ETM+ image acquisition carried out simultaneously. Using these data, we attempted to establish relationships between tidal flat environmental factors and reflectance observed by ETM+, and to set up a new critical grain size useful for optical remote sensing. Although the grain size of 4 $\Phi$ has been conventionally used as a critical size by sedimentologists, the correlation with optical reflectance was very low. Instead, the grain size of 2 $\Phi$ showed a relatively high correlation coefficient, 0.699, with ETM+ band 4, except near tidal channels in upper tidal flat. We concluded that the grain size of 2 $\Phi$ would be better to use for a critical grain size in Gomso Bay. The grain size also correlated well with moisture content having a correlation coefficient of -0.811 when the 2 $\Phi$ criterion was used. The results of factor analysis showed moisture content was more important parameter than topographic relief, and they were different from German tidal flats in which topographic relief was the prior factor This can be explained by finer grain composition of the Gomso bay tidal flat. In short, moisture content and topography as well as grain size should be considered in tidal flat remote sensing.

• Korean Journal of Remote Sensing
• /
• v.26 no.5
• /
• pp.497-510
• /
• 2010

In this study, comparisons of the backscattering coefficients and the coherence values which had been extracted from SAR (Synthetic Aperture Radar) images such as JERS-1, ENVISAT and ALOS satellites with surface roughness, surface geometric and soil moisture content were carried out. As the results of analysis using the backscattering coefficient and coherence values from SAR images, the coherence was shown high in the region containing more of mud fraction due to higher viscosity of fine grain-size. A lot of tidal channels were well developed in the Ganghwa tidal flat, affecting the drainage of seawater and subsequent soil moisture content by exposure time of tidal flat. The backscattering coefficient. consequently, appeared to be lower in sand flat and mix flat with decrease of soil moisture. In contrast, most mud flats were distributed at high elevation so that soil moisture was not much influenced by seawater. The backscattering coefficient in mud flat seemed to have a relationship with the density of tidal channel. In addition, lowering backscattering coefficients in the all Ganghwa tidal flat was observed when surface remnant water increased according to the amount of rainfall. The correlation between backscattering coefficient, coherence and sediment environment factors in the Ganghwa tidal flat was investigated. In the future, more quantitative spatial analysis will be helpful to well understand the sedimentary influence of various sediment environment factors.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2002.08a
• /
• pp.24-30
• /
• 2002

With the economic development in China, the utilization of silty and muddy coasts including the construction of deepwater harbors and channels are being carried out at a fast pace. In these projects, the key technology involved is sediment transport. Due to the complication of sediment problems under the actions of tidal currents and wind waves, physical experiments are necessary In addition to numerical model studies. (omitted)

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.48 no.4
• /
• pp.370-378
• /
• 2012

This study is to find out the distribution characteristic of Octopus minor in the Tando Bay on the southwest coast of Korea with conducting surveys from May of 2006 to April of 2007. Surveys were carried out at 20 stations on 2 and 3 tide time in the low speed of high tide at night and conducted during 30minutes (4 times fishing) per station. Catch per unit effort (CPUE) was estimated by total catch per 500hooks at each station. Monthly CPUE showed that they put highest in October, November, April and June at 10.4, 10.5, 9.4 and 7.7 individuals respectively. On the other hand, CPUE put lowest in January, the coldest month, and August, the hottest month, at 0.2 and 0.3 individuals respectively. As for geographical mantle length distribution, average mantle length ranged from 6.2cm to 7.3cm at stations near the tidal channels (St. 1, 4, 5, 6, 8, 9, 10, 13, 14, 15, 18, 19 and 20), and was smaller than 6.0cm at stations located inside of bay (St. 2, 3, 7, 11, 12 and 17). In terms of geographical distribution density, CPUE showed higher than 8.0 at St.4 in Changmaeri, St.8 in Taecheonri, St.13 near Seondo, St.18 in Naeri and St.14 in western part of Tando which are located near the main tidal channels. And distribution density showed low that CPUE was lower than 5.0 individuals at stations located inside of bay (St. 1, 3, 5, 6, 7, 11, 12, 16 and 20). Through the results, the difference of distribution density reflects that distribution of Octopus minor is affected by direction of current and inflow of pollutant from land in direct. Therefore, it is considered that bottom composition of tidal flat and distribution of live food are the crucial cause of identifying the distribution characteristics of Octopus minor. For this reason, it is judged to need additional research on it.

• Fisheries and Aquatic Sciences
• /
• v.13 no.2
• /
• pp.167-181
• /
• 2010

To predict changes in the marine environment of the Beolgyo Stream Estuary in Jeonnam Province, South Korea, where cohesive tidal flats cover a broad area and a large bridge is under construction, this study conducted numerical simulations involving tidal flow and cohesive sediment transport. A wetting and drying (WAD) technique for tidal flats from the Princeton Ocean Model (POM) was applied to a large-scale-grid hydrodynamic module capable of evaluating the flow resistance of structures. Derivation of the eddy viscosity coefficient for wakes created by structures was accomplished through the explicit use of shear velocity and Chezy's average velocity. Furthermore, various field observations, including of tide, tidal flow, suspended sediment concentrations, bottom sediments, and water depth, were performed to verify the model and obtain input data for it. In particular, geologic parameters related to the evaluation of settling velocity and critical shear stresses for erosion and deposition were observed, and numerical tests for the representation of suspended sediment concentrations were performed to determine proper values for the empirical coefficients in the sediment transport module. According to the simulation results, the velocity variation was particularly prominent around the piers in the tidal channel. Erosion occurred mainly along the tidal channels near the piers, where bridge structures reduced the flow cross section, creating strong flow. In contrast, in the rear area of the structure, where the flow was relatively weak due to the formation of eddies, deposition and moderated erosion were predicted. In estuaries and coastal waters, changes in the flow environment caused by artificial structures can produce changes in the sedimentary environment, which in turn can affect the local marine ecosystem. The numerical model proposed in this study will enable systematic prediction of changes to flow and sedimentary environments caused by the construction of artificial structures.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.4
• /
• pp.255-265
• /
• 2013

In the coastal region of Korea, historical tide harmonic constants were collected. Long-term tides and short-term tides observed by the KHOA were analyzed by a tide harmonic analysis method. Based on the harmonic constants, tidal characteristics such as tide asymmetry in Korean coastal waters were investigated. The harmonic constants obtained from the long-term tide data in the western coast have been used to show the relation between tide variation and reclamation project. $M_2$ amplitudes in the western coast have been decreased and $M_2$ phases were faster. $M_4$ amplitudes also were reduced and $M_4$ phases were faster in overall. In Mokpo and Kunsan tidal nonlinearity is relatively conspicuous. Overall, non-linearity of tidal currents is higher in the tidal channels flowing fast. The tidal non-linearity has increased by the development projects including large reclamation. The flood dominant characteristic in the northern and central part of Korean western coastal waters and the ebb dominant characteristic in the southern part have been intensified. The construction of Saemangeum sea dike has significantly changed the tidal characteristic in Korean western coastal waters.