• 한국해안해양공학회지
• /
• 제7권4호
• /
• pp.355-367
• /
• 1995

정점에서의 조석(조위, 조류)은 전통적으로 조화분석 및 예보에 의해 추정되며 다른 방법은 조석수치모형에 의한 예보이다. 본 연구에서는 수치모형의 직접적인 출력으로서 조석을 추정하는 방법과 장기간(1개월)의 모형출력을 조화분석한 조위와 조류의 조화상수의 Data Table을 근거로 한 인천항 전역의 임의위치에서의 실시간적으로 조석을 신속하게 추정하는 방법을 제시하였다.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2002년도 학술발표회 발표논문집
• /
• pp.81-84
• /
• 2002

The Sea dike tidal closure works has traditionally ended in the failure. Therefore, the success of the tidal closure in Hwaong in the sea near Inchon where has the greatest tidal gap in our country deserves to consider its meaning. While its process was going on, we had the difficulty like bad weather, unexpected ground settlement, flow velocity beyond the imagine, etc. Moreover, environment group's rush was so fierce that the works could have been delayed. This works showed that not only technical aspects but also social problems(environment group's rush and public discontents) were important factors in accomplishing the works. Finally, all of the difficulties were overcome and the tidal closure works were successful. So, This success is the best example in a kind of the another works in itself.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전력기술부문
• /
• pp.375-377
• /
• 2006

This paper presents a method to calculate generation power for integrating Sihwa tidal power into power systems. The sea levels of 1 minute interval using cubic interpolation based on the forecasted levels of high and low water offered from Nori(National Oceanographic Research Institute) are calculated. If the sea level is greater than the lake level and the difference between sea level and lake level at high tide is over the default value, it begins to calculate the tidal power. It is seen that tidal power can supply power to demand side stably and economically from assessment of effect for integrating tidal power into power systems.

• 한국환경과학회지
• /
• 제9권2호
• /
• pp.131-136
• /
• 2000

The seasonal data obtained at National Fisheries Research and Development Institute from 1989 to 1994 were analyzed to investigate the seasonal variations of temperature and salinity in incheon coastal area. In the tidal flats covering from Incheon harbor to Sorae, the mean temperatures are higher, the amplitudes of flats, the mean salinities are lower, its amplitudes are larger, and its phases are later than those of outer tidal flats. These suggest that Inchion coastal area may be divided into two areas: the tidal flats from Incheon harbor to Sorae, which is largely influenced by the seasonal variation of solar heating, precipitation and evaporation and the outer tidal flats, which is slightly influenced by the effects of seasonal variation of salinity.

• 한국태양에너지학회 논문집
• /
• 제29권5호
• /
• pp.73-80
• /
• 2009

A tidal current turbine is designed and analyzed numerically by using blade element momentum theory. The rated power has a limitation because the diameter of the tidal current turbine cannot exceed the depth of sea water. This study investigates a horizontal axis tidal-current turbine with a rated power of 500 kW. NACA-6 series laminar foil shape is used for basic airfoil along the blade span. The distributions of chord length and twist angle along the blade span are obtained from the hydrodynamic optimization procedure. Prandtl's tip loss correction and angle of attack correction considering the three-dimensional effect are applied for this study. The power coefficient curve shows maximum peak at the rated tip speed ratio of 6.0, and the maximum torque coefficient is developed at the tip speed ratio of 4. The drag coefficient reaches about 0.85 at the design tip speed ratio.

• 신재생에너지
• /
• 제9권1호
• /
• pp.44-50
• /
• 2013

In order to analyze the characteristics of tidal current power generation system, we measured the output power according to the stream velocity by a water tunnel system and a simulation in MATLAB/Simulink. The water tunnel system consisted of impeller tidal flow transducer and PMSG with rotor in the water. The simulation consisted of PMSG, the tidal current turbine, and back-to-back converter. Also, we simulated the characteristics of output power according to the change of blade length and angular velocity.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.67-73
• /
• 2006

Uldolmok waterway is famous for its strong tidal current with maximum current of about 12knots, which is located between the Chindo island off the southwestern tip of Korean peninsula and mainland. A serious of field observations, along with numerical modeling, have been carried out over the last several years, in order to understand the tidal dynamics and to examine the related variables according to the tidal current power plant (TCPP) operation.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.74-79
• /
• 2006

General formula are presented for the maximum power available from the tidal head in a closed basin and from the tidal currents in a channel connecting two large bodies of water. In the latter case, the available energy cannot be estimated from the kinetic energy flux in the undisturbed state, but can be obtained from knowledge of the tidal head between the ends of the channel and the maximum volume flux in the undisturbed state. The results are supported by detailed calculations for Johnstone Strait, British Columbia, using a two-dimensional finite element model. The model also allows an extension to the case of multiple channels. More work is needed to allow for partial tidal fences which do not occupy the whole cross-section of a channel.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2012년도 전기공동학술대회 논문집
• /
• pp.154-154
• /
• 2012

Many suggestions is offered to resolve global warming. Tidal current generation is producing power by switched tidal difference sea water horizontal fluid flow produced by tidal difference using rotor and generator. So, change the angle of inflow condition due to the entrance of efficiency are considered. We therefore investigated three dimensional flow analysis and performance evaluation using commercial ANSYS-CFX code for horizontal axis turbine. Then We also studied three dimensional flow characteristics of a rotating rotor and blade surface streamlines around a rotor. As a result, Cp was highest at TSR 5.5, especially the larger changes in the angle of inflow condition decreased efficiency.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권5호
• /
• pp.541-549
• /
• 2014

Horizontal axis tidal turbines are machinery inherited from the principle of wind turbines to enable the application of utilizing ocean's current energy. Its function does not differ from that of wind case, which is to convert fluid's kinetics energy to mechanical torque, therefore generates electricity. Since the ocean has been an enormous source of untapped power, tidal turbines have been being investigated recently to meet human's demand of energy with respect to environment friendly approach. This paper introduces a couple of turbine designs which are anticipated to have high performance. A comparison among recent works on the same topic is also made for validation.