• 한국재료학회지
• /
• 제9권11호
• /
• pp.1062-1068
• /
• 1999

고정원으로부터 배출되는 질소산화물의 저감 기술 중에서 선택적 촉매 환원법(SCR법)은 가장 경제적이고 효율적인 방법으로 알려져 있다. 이 SCR 촉매의 탈질능을 향상시키기 위하여,$ TiOSO_4$ 및 Ti($SO_4$)$_2$용액으로부터 비표면적이 넓은 $TiO_2$의 비표면적 및 결정구조에 미치는 영향과 이들의 상관관계에 대하여 조사하였다. $TiOSO_4$용액으로부터 합성한 $TiO_2$의 최대 비표면적은 $382\m^2$/g이었고, Ti($SO_4$)$_2$용액으로부터 합성한 $TiO_2$의 최대 비표면적은 $335\m^2$/g이었으며, $TiO_2$는 비정질 형태의 결정구조를 보였다. 하소처리에 의해 비정질 $TiO_2$는 결정화되었고, 결정 중에 함유되어 있는 불순물은 $TiO_2$의 결정화를 억제하였다.

• Advances in environmental research
• /
• 제5권1호
• /
• pp.61-77
• /
• 2016

$NanoTiO_2$ was synthesized by ultrasonication assisted sol-gel process and subjected to iron doping and carbon-iron codoping. The synthesized catalysts were characterized by XRD, HR-SEM, EDX, UV-Vis absorption spectroscopy and BET specific surface area analysis. The average crystallite size of pure $TiO_2$ was in the range of 30 - 33 nm, and that of Fe-$TiO_2$ and C-Fe $TiO_2$ was in the range of 7 - 13 nm respectively. The specific surface area of the iron doped and carbon-iron codoped nanoparticles was around $105m^2/g$ and $91m^2/g$ respectively. The coupled semiconductor photo-Fenton's activity of the synthesized catalysts was evaluated by the degradation of a cationic dye (C.I. Basic blue 9) and an anionic dye (C.I. Acid orange 52) with concurrent investigation on the operating variables such as pH, catalyst dosage, oxidant concentration and initial pollutant concentration. The most efficient C-Fe codoped catalyst was found to effectively destruct synthetic dyes and potentially treat real textile effluent achieving 93.4% of COD removal under minimal solar intensity (35-40 kiloLUX). This reveals the practical applicability of the process for the treatment of real wastewater in both high and low insolation regimes.

• 공업화학
• /
• 제2권4호
• /
• pp.330-339
• /
• 1991

$V_2O_5-TiO_2/SiO_2$ 촉매를 제조하여 그 산특성을 조사하였고, 동 촉매상에서 o-자일렌의 무수프탈산으로의 부분산화반응에 대한 활성측정을 병행하여 촉매의 산특성과 반응성과의 연관성을 알아보았다. $V_2O_5$ 촉매는 V=O로 추정되는 약산점과 V-O-V로 추정되는 강산점을 가지고 있었으며, 소성온도가 높아질수록 약산점의 양이 감소하였다. $V_2O_5-TiO_2/SiO_2$ 촉매의 경우 약산점이 크게 나타났으며, 그 양은 $SiO_2$의 담지량이 20 mole% 일 때 최대치를 보였고 그 이상에서 일정하였다. 한편, o-자일렌 부분산화반응에서 $V_2O_5-TiO_2/SiO_2$는 $V_2O_5/SiO_2$에 비해 전체 전환율 및 무수프탈산으로의 선택도를 크게 증가시켰으며, $V_2O_5-TiO_2/SiO_2$에서 $TiO_2$의 양이 증가할 경우 전체 전환율은 증가하였으나 무수프탈산으로의 선택도는 크게 변하지 않았다. V=O로 추정되는 약산점은 o-자일렌을 약하게 흡착함으로써 무수프탈산으로의 부분산화반응을, V-O-V로 추정되는 강산점은 o-자일렌을 보다 강하게 흡착하여 $C_1$으로의 완전산화반응을 각각 유도함을 알 수 있었다.

• 환경위생공학
• /
• 제20권4호통권58호
• /
• pp.45-50
• /
• 2005

Titania gel formations were prepared by sol-gel method using titanium(IV) chloride $(TiCl_4)$, and its characteristics were analyzed by varying the $epoxide/TiCl_4$ ratio and the amount of water In the end, titania $(TiO_2)$ aerogel were prepared using supercritical drying process. VOCs such as benzene, toluene, and m-xylene (BTX) were oxidized using prepared titania aerogel and commercially available $TiO_2$, and its performance was compared. The surface area, pore volume, and average pore diameter of 1,2-epoxybutane are significantly smaller than the propylene oxide. And the titania aerogels with 6 moi of epoxides have high surface areas, pore volumes, and average pore diameters. As a result of photo-oxidation, conversion of benzene was reached about $70\%$, and other reactants were reached about $60\%$ similarly. The conversion of BTX was increased as inlet concentration decreased. The reactivity of titania calcined at $600^{\circ}C$ was greater than $400^{\circ}C$ and $800^{\circ}C$. Water is required as a reactants for the oxidation of VOCs, and the continuous consumption of hydroxyl radicals required replenishments to maintain catalyst activity. The activity ratio increased with increasing reaction time when enough amount of water was present in the reactor.

• 한국대기환경학회지
• /
• 제20권6호
• /
• pp.783-792
• /
• 2004

In this study, a thick-film semiconductor odor gas sensor for the detection of $CH_3$SH was developed using SnO$_2$ as the main substrate and was investigated in terms of its sensitivity and reaction time. In the process of manufacturing the sensor, Taguchi's design of experiment (DOE) was applied to analyze the effects of a variety of parameters, including the substrate, the additives and the fabrication conditions, systematically and effectively. Eight trials of experiments could be possible using the 27 orthogonal array for the seven factors and two levels of condition, which originally demands 128 trials of experiments without DOE. The additives of Sb$_2$O$_{5}$ and PdCl$_2$ with the H$_2$PtCl$_{6}$ ㆍ6$H_2O$ catalyst were appeared to be important factors to improve the sensitivity, and CuO, TiO$_2$, V$_2$O$_{5}$ and PdO were less important. In addition, TiO$_2$, V$_2$O$_{5}$ and PdO would improve the reaction time of a sensor, and CuO, Sb$_2$O$_{5}$, PdCl$_2$ and H$_2$PtCl$_{6}$ㆍ6$H_2O$ were negligible. Being evaluated simultaneously in terms of both sensitivity and reaction time, the sensor showed the higher performance with the addition of TiO$_2$ and PdO, but the opposite results with the addition of CuO, V$_2$O$_{5}$, Sb$_2$O$_{5}$ and PdCl$_2$. The amount of additives were superior in the case of 1% than 4%. H$_2$PtCl$_{6}$ㆍ6$H_2O$ would play an important role for the increase of sensor performance as a catalyst.nce as a catalyst.

• 한국환경과학회지
• /
• 제11권6호
• /
• pp.597-603
• /
• 2002

Photocatalytic degradation of phenol was carried out with UV-illuminated TiO$_2$-SiO$_2$ in aqueous suspension. TiO$_2$-SiO$_2$ catalysts were prepared by sol-gel method from the titanium isopropoxide and tetraethylorthosilicate at different Ti/Si ratio and some commercial TiO$_2$ catalysts were used as purchased. All catalysts were characterized by X-ray Diffraction(XRD) and BET surface area analyzer. The effect of reaction conditions, such as initial concentration of phenol, reaction temperature and catalyst weight on the photocatalytic activity was studied. In addition, TiO$_2$-SiO$_2$(49: 1) prepared by sol-gel method showed higher activity than commercial TiO$_2$catalysts on the photocatalytic degradation of phenol. The addition of SiO$_2$ into TiO$_2$hepled to increase the thermal stability of titania which suppressed the formation of anatase into rutile. The photocatalytic degradation of phenol showed pseudo-1st order reaction and the degradation rate increases with decreasing initial phenol concentration.

• Korean Chemical Engineering Research
• /
• 제45권4호
• /
• pp.410-413
• /
• 2007

불균일계 중합촉매내 내부전자공여체(ID)의 존재 유무와 종류가 에틸렌과 1-부텐 간의 공중합에서 얻어지는 공중합물에 미치는 영향에 대하여 살펴보았다. 실리카 담지 $TiCl_4$ 촉매를 실리카 담지체에 ethylaluminium dichloride, magnesium alkyl, 2-ethyl-1-hexanol, $TiCl_4$와 여러 종류의 ID 등을 이용하여 제조하였으며 이 때 ID와 Ti의 몰비를 0.5로 고정하였다. ID는 ethylbenzoate(EB), diisobuylphthalate(DIBP), dioctylphthalate(DOP)을 사용하였다. ID가 촉매 내에 존재하는 경우 Ti(+3)의 함량비가 증가하였다. 공중합 활성은 EB를 $TiCl_4$ 반응 후에 투입한 촉매가 가장 높았으며 그 외의 ID가 존재하는 촉매는 활성이 감소하는 현상을 보였다. Xylene soluble(XS) 측정값은 ID가 존재하는 모든 중합촉매가 ID가 없는 경우 보다 50% 이상 감소하였으며 Crystaf 분석 결과 DIBP가 존재하는 촉매가 상대적으로 균일한 화학조성분포를 보였다. 이는 ID가 분균일한 촉매활성점을 보다 균일하게 만드는 역할에서 기인한 것으로 보이며 입체규칙성을 갖는 활성점을 만들거나 비입체규칙성 활성점을 blocking하는 역할 때문인 것으로 설명할 수 있다.

• 한국재료학회지
• /
• 제32권3호
• /
• pp.125-131
• /
• 2022

Effect of sulfation processes on the physicochemical properties of ZrO₂ and TiO₂ nanoparticles were thoroughly investigated. SO₄/ZrO₂ and SO₄/TiO₂ catalysts were synthesized to identify the acidity character of each. The wet impregnation method of ZrO₂ and TiO₂ nanoparticles was employed using H2SO₄ with various concentrations of 0.5, 0.75, and 1 M, followed by calcination at 400, 500, and 600 ℃ to obtain optimum conditions of the catalyst synthesis process. The highest total acidity was found when using 1 M SO₄/ZrO₂-500 and 1 M SO₄/TiO₂-500 catalysts, with total acidity values of 2.642 and 6.920 mmol/g, respectively. Sulfation increases titania particles via agglomeration. In contrast, sulfation did not practically change the size of zirconia particles. The sulfation process causes color of both catalyst particles to brighten due to the presence of sulfate. There was a decrease in surface area and pore volume of catalysts after sulfation; the materials' mesoporous structural properties were confirmed. The 1 M SO₄/ZrO₂ and 1 M SO₄/TiO₂ catalysts calcined at 500 ℃ are the best candidate heterogeneous acid catalysts synthesized in thus work.

• 공업화학
• /
• 제21권1호
• /
• pp.18-23
• /
• 2010

$TiO_2$를 담체로 한 Pt계 촉매를 이용하여 저온($80{\sim}150^{\circ}C$) 영역에서 적용될 수 있는 $H_2$ SCR의 촉매 반응 특성을 조사하였다. 실험은 반응가스 중 수분, 산소, 촉매의 소성온도, $H_2$/NOx 몰비, 공간속도에 대하여 수행하였다. Pt/$TiO_2$를 이용한 $H_2$ SCR 반응에서 수분은 inhibition으로 작용하였으며, 배가스 중 산소 농도가 희박할수록 반응활성이 증가하는 경향을 나타내었다. 하지만 산소가 존재하지 않을 때에는 NOx와 $H_2$가 반응하여 $NH_3$ slip이 발생하였다. 또한 촉매의 상전이 문제에 의하여 $600^{\circ}C$ 이하에서 소성하는 것이 가장 유리하였으며, $H_2$/NOx 몰비가 증가할수록 반응 활성이 증가하였다. 하지만 $H_2$ slip은 몰비가 증가하여도 $H_2$가 $H_2O$로 산화되어 나타나지 않았다.

• Advances in materials Research
• /
• 제6권3호
• /
• pp.303-316
• /
• 2017

In this article, novel olefin polymerization catalyst with lower cost and simple synthetic process were developed, $ArOTiCl_3$ complexes [$(2-OMeC_6H_4O)TiCl_3(C1)$, $(2,4-Me_2C_6H_3O)TiCl_3(C2)$, $TiCl_3(1,4-OC_6H_4O)TiCl_3(C3)$, $TiCl_3(1,4-OC_6H_2O-Me_2-2,5)$ $TiCl_3(C4)$] and corresponding $(ArO)_2TiCl_2$ complexes [$TiCl_2(OC_6H_4-OMe-2)_2(C5)$ and $TiCl_2(OC_6H_3-Me_2-2,6)_2(C6)$] have been synthesized by the reaction of $TiCl_4$ with phenol, all these complexes were well characterized with $^1H$ NMR, $^{13}C$ NMR, MASS and EA. When combined with methylaluminoxane (MAO), the $ArOTiCl_3/MAO$ system shows high activity for ethylene copolymerization with 1-octene and copolymer was obtained with broaden molecular weight distribution (MWD). The $^{13}C$ NMR result of polymer indicates that the 1-octene incorporation in polymer reached up to 8.29 mol%. The effects of polymerization temperature, concentration of polymerization monomer and polymerization time on the catalytic activity have been investigated.