• Korean Journal of Materials Research
• /
• v.5 no.5
• /
• pp.598-605
• /
• 1995

Thin films of $YB_{2}Cu_{3}O_{7-d}$ were prepared on various substrated of MgO(100), $SrTiO_{3}$, and $LaAlO_{3}$ by using off-axis magentron sputtering methods and annealing in-situ. The prarameters of film fabrication processes had been optimized through a "follow the lcoal maxima" strategy to yield good quality films in therms of the critical temperature $T_{c}$ and the critical current density $J_{c}$. Optimizedproecsses employing a plane magndtron and an cylindrical magnetron yielded $T_{c}$>90K along with $J_{c}$$10^{6}$A/$\textrm{cm}^2$ at 77K and > 2${\times}$$10^{7}$A/$\textrm{cm}^2$ at 5K. The sampels, however, showed degradationinthe properties, after chemical etching for fabrication of microbridges with the line width of 2-10 mocrons. In particular, the value of $T_{c}$ for the microbridges of 2microns was as small as 80%. The degradation was strongly dependent on the line width through a formula : $T_{c}$(e)=$T_{c}$)b) [1-a exp(-1000 bL)} where $T_{c}$(e) and $T_{c}$ (b) are the values of $T_{c}$ in the absolute scale measured after and before chemical etching, respectively and L is the line width in mm. By utilizing a best fitting technique, the proper constant values of a and to b were found as exp(-1.2) and 0.22, respectively. This formula was very useful in estimatiing the upper limit of the device operationtemperature.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.1
• /
• pp.29-37
• /
• 1999

In this study, we have prepared PLT thin films having various La concentrations by using sol-gel method and studied on the effect of La concentration on the electrical properties of PLT thin films. As the La concentration increases from 5mol% to 28mol%, the dielectric constant at 10kHz increases from 428 to 761, while the loss tangent decreases from 0.063 to 0.024. Also, the leakage current density at 150kV/cm has a tendency to decrease from 6.96${\mu}A/cm^2$ to 0.79${\mu}A/cm^2$. In the result of hysteresis loops of PLT thin films, the remanent polariation and the coercive field decrease from 9.55${\mu}C/cm^2$ to 1.10${\mu}C/cm^2$ and from 46.4kV/cm to 13.7kV/cm, respectively. With the result of the fatigue test on the PLT thin films, we have found that the fatigue properties are improved remarkably as the La concentration increases from 5 mol% to 28mol%. In particular, the PLT28) has paraelectric phase and its charge storage clensity and leakage current density at 5V are 134fC/${\mu}cm^2$ and 1.01${\mu}A/cm^2$, respectively. The remanent polarization and coercive field of the PLT(10) film are 6.96${\mu}C/cm^2$ and 40.2kV/cm, respectively. After applying of $10^9$ square pulses with ${\pm}5V$, the remanent polarilzation of the PLT(10) film decreases about 20% from the initial state. In the results, we conclude that the 10mol% and the 28mol% La doped PLT thin films are very suitable for the capacitor dielectrics of new generation of DRAM and NVFRAM respecitively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.137-137
• /
• 2009

Thin-film transistors (TFTs) that can be prepared at low temperatures have attracted much attention due to the great potential for flexible electronics. One of the mainstreams in this field is the use of organic semiconductors such as pentacene. But device performance of the organic TFTs is still limited by low field effect mobility or rapidly degraded after exposing to air in many cases. Another approach is amorphous oxide semiconductors. Amorphous oxide semiconductors (AOSs) have exactly attracted considerable attention because AOSs were fabricated at room temperature and used lots of application such as flexible display, electronic paper, large solar cells. Among the various AOSs, a-IGZO was considerable material because it has high mobility and uniform surface and good transparent. The high mobility is attributed to the result of the overlap of spherical s-orbital of the heavy pest-transition metal cations. This study is demonstrated the effect of thickness channel layer from 30nm to 200nm. when the thickness was increased, turn on voltage and subthreshold swing were decreased. a-IGZO TFTs have used a shadow mask to deposit channel and source/drain(S/D). a-IGZO were deposited on SiO2 wafer by rf magnetron sputtering. using power is 150W, working pressure is 3m Torr, and an O2/Ar(2/28 SCCM) atmosphere at room temperature. The electrodes were formed with Electron-beam evaporated Ti(30nm) and Au(70nm) structure. Finally, Al(150nm) as a gate metal was evaporated. TFT devices were heat treated in a furnace at $250^{\circ}C$ in nitrogen atmosphere for an hour. The electrical properties of the TFTs were measured using a probe-station to measure I-V characteristic. TFT whose thickness was 150nm exhibits a good subthreshold swing(S) of 0.72 V/decade and high on-off ratio of 1E+08. Field effect mobility, saturation effect mobility, and threshold voltage were evaluated 7.2, 5.8, 8V respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.263-263
• /
• 2016

최근 반도체 시장에서는 저비용으로 고성능 박막 트랜지스터(TFT)를 제작하기 위한 다양한 기술들이 연구되고 있다. 먼저, 재료적인 측면에서는 비정질 상태에서도 높은 이동도와 가시광선 영역에서 투명한 특성을 가지는 산화물 반도체가 기존의 비정질 실리콘이나 저온 폴리실리콘을 대체하여 차세대 디스플레이의 구동소자용 재료로 많은 주목받고 있다. 또한, 공정적인 측면에서는 기존의 진공장비를 이용하는 PVD나 CVD가 아닌 대기압 상태에서 이루어지는 용액 공정이 저비용 및 대면적화에 유리하고 프리커서의 제조와 박막의 증착이 간단하다는 장점을 가지기 때문에 활발한 연구가 이루어지고 있다. 특히 산화물 반도체 중에서도 indium-gallium-zinc oxide (IGZO)는 비교적 뛰어난 이동도와 안정성을 나타내기 때문에 많은 연구가 진행되고 있지만, 산화물 반도체 기반의 박막 트랜지스터가 가지는 문제점 중의 하나인 문턱전압의 불안정성으로 인하여 상용화에 어려움을 겪고 있다. 따라서, 본 연구에서는 기존의 산화물 반도체의 불안정한 문턱전압의 문제점을 해결하기 위해 마이크로웨이브 열처리를 적용하였다. 또한, 기존의 IGZO에서 suppressor 역할을 하는 값비싼 갈륨(Ga) 대신, 저렴한 지르코늄(Zr)과 하프늄(Hf)을 각각 적용시켜 용액 공정 기반의 Zr-In-Zn-O (ZIZO) 및 Hf-In-Zn-O (HIZO) TFT를 제작하여 시간에 따른 문턱 전압의 변화를 비교 및 분석하였다. TFT 소자는 p-Si 위에 습식산화를 통하여 100 nm 두께의 $SiO_2$가 열적으로 성장된 기판 위에 제작되었다. 표준 RCA 세정을 진행하여 표면의 오염 및 자연 산화막을 제거한 후, Ga, Zr, Hf 각각 suppressor로 사용한 IGZO, ZIZO, HIZO 프리커서를 이용하여 박막을 형성시켰다. 그 후 소스/드레인 전극 형성을 위해 e-beam evaporator를 이용하여 Ti/Al을 5/120 nm의 두께로 증착하였다. 마지막으로, 후속 열처리로써 마이크로웨이브와 퍼니스 열처리를 진행하였다. 그 결과, 기존의 퍼니스 열처리와 비교하여 마이크로웨이브 열처리된 IGZO, ZIZO 및 HIZO 박막 트랜지스터는 모두 뛰어난 안정성을 나타냄을 확인하였다. 결론적으로, 본 연구에서 제안된 마이크로웨이브 열처리된 용액공정 기반의 ZIZO와 HIZO 박막 트랜지스터는 추후 디스플레이 산업에서 IGZO 박막 트랜지스터를 대체할 수 있는 저비용 고성능 트랜지스터로 적용될 것으로 기대된다.

• Journal of Mechanical Science and Technology
• /
• v.20 no.1
• /
• pp.76-84
• /
• 2006

Arrayed ultrasonic sensors based on the piezoelectric thin film (lead-zirconate-titanate: Pb($Zr_{0.52}Ti_{0.48})O_{3}$) having composite membrane structure are fabricated. Different thermal and elastic characteristics of each layer generate the residual stress during the high temperature deposition processes, accomplished diaphragm is consequently bowing. We present the membrane deflection effects originated from the residual stress on the resonant frequencies of the sensor chips. The resonant frequencies ($f_r$) measured of each sensor structures are located in the range of $87.6{\sim}111\;kHz$, these are larger $30{\sim}40\;kHz$ than the resultant frequencies of FEM. The primary factors of $f_r$ deviations from the ideal FEM results are the membrane deflections, and the influence of stiffness variations are not so large on that. Membrane deflections have the effect of total thickness increase which sensitively change the $f_r$ to the positive direction. Stress generations of the membrane are also numerically predicted for considering the effect of stiffness variations on the $f_r$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.118-118
• /
• 2009

Low temperature co-fired ceramic (LTCC) is one of promising materials for MEMS structures because it has very good electrical and mechanical properties as well as possibility of making various three dimensional (3D) structures. In this work, piezoelectric pressure sensors based on hybrid LTCC technology were presented. The LTCC diaphragms with thickness of 400 um were fabricated by laminating 12 green tapes which consist of alumina and glass particle in an organic binder. The piezoelectric sensing layer consists of $Pb(ZrTi)O_3$ (PZT) thin film deposited by RF magnetron sputtering method on between top and bottom Au electrodes. The results showed that the fabrication method is very suitable for pressure sensor applications. The PZT films deposited on LTCC diaphragms were successfully grown and were analyzed by using X-ray diffraction method (XRD) and field emission scanning electron microscope (FESEM).

• 한국정보통신설비학회:학술대회논문집
• /
• 2003.08a
• /
• pp.286-288
• /
• 2003

In this paper, in order to obtain a large differential phase shift with a little change in applied voltage, a ferroelectric reflective load circuit has been designed on top of barium strontium titanate $(Ba,Sr)TiO_3$ [BST] thin film. The design of the ferroelectric reflection-type phase shifter is based on a reflection theory of terminating circuit, which has a reflection-type analogue phase shifter with two ports terminated in symmetric phase-controllable reflective networks. To achieve large amounts of phase shift in low bias-voltage range, the effects of change of capacitance and transmission line connected with two coupled ports of a 3-dB $90^{\circ}$ branch-line hybrid coupler have been investigated. A large phase shift with a small capacitance change in the parallel terminating circuit has been demonstrated in the paper.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.6
• /
• pp.510-514
• /
• 2005

We have investigated the excitation-light source dependence of photo-catalytic efficiency for the benzene removal. The photo-catalytic module for the benzene removal is fabricated by a combination of GaN-based ultraviolet light-emitting diode (UV GaN-LED) and $TiO_2$ thin film coated on an aluminum plate. The benzene reduction rates of 365 nm and 375 nm modules at 60 mA junction current are approximately $8.95\;\%/Hr$ and $9.2\;\%/Hr$, respectively, which indicates that 365 nm GaN-LED is more effective than 375 nm GaN-LED. The benzene reduction efficiency is also noticeably dependent on the excitation wavelength and excitation-light power, as well as it is increased with the shorter wavelength and higher excitation power. This result exhibits that UV GaN-LED is useful to remove the volatile organic compounds (VOCs) existing in the environment.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2501-2503
• /
• 1998

In this paper, the silicon-nitride membrane structure for IR sensor was fabricated through the etching and the direct bonding. The PTO layer as a IR detection layer was deposited on the membrane and its characteristics were measured. The attack of PTO layer during the etching of silicon wafer as well as the thermal isolation of the IR detection layer can be solved through the method of bonding/etching of silicon wafer. Because the PTO layer of c-axial orientation raised thermal polarization without polling, the more integration capability can be achieved. The surface roughness of the membrane was measured by AFM, the micro voids and the non-contacted area were inspected by IR detector, and the bonding interface was observed by SEM. The polarization characteristics and the dielectric characteristics of the PTO layer were measured, too.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.177-178
• /
• 2007

본 연구에서는 MIM (Metal-Insulator-Metal) capacitor의 유전 물질로 사용되는 $Ba_xTi_yO_z$(BTO) 박막의 식각 특성을 고찰하였다. $Cl_2$/Ar 혼합가스를 이용하여 Inductively Coupled Plasma(ICP)에서 BTO 박막을 식각하였고, 식각된 BTO박막의 표면을 X-ray photoelectron spectroscopy(XPS) 분석하였다. BTO박막의 식각 속도는 Ar이 80%인 식각 조건에서 31.7nm/min의 식각 속도를 추출하였고, 동시에 Pt박막에 대한 높은 선택비를 얻었다. X-ray photoelectron spectroscopy (XPS) 분석 결과로부터 표면 반응을 조사하여, 식각 기구를 고찰하였다.