• 한국토양비료학회지
• /
• 제24권2호
• /
• pp.130-136
• /
• 1991

우분(牛糞)의 부숙(腐熟)을 용이(容易)하게 하기 위하여 우분(牛糞)에 왕겨를 비율별(比率別)로 섞고 수분함량(水分含量), C/N률(率) 및 C/P률(率)에 대(對)한 조건(條件)을 파악(把握)하여 부숙(腐熟)과 후숙시험(後熟試驗)을 실시(實施)하였다. 최종제품(最終製品)으로 오이 유식체(幼植物)을 재배(栽培)하였고, 그 결과(結果)는 다음과 같다. 1 부숙기간중(腐熟期間中) 퇴적내(堆積內) 평균온도(平均溫度)는 속서구(速成區)가 $55{\sim}65^{\circ}C$로 광행구(慣行區) $40{\sim}50^{\circ}C$보다 훨씬 높았으며 2. T-N함량(含量)은 속성구(速成區)가 관행구(慣行區) 보다 낮았으나 T-C함량(含量) 및 C/N률(率)은 높았으며, 속성구(速成區)가 관행구(慣行區)보다 부숙(腐熟)이 훨씬 잘 되었다. 3. 후숙기간중(後熟期間中) 부숙온도(腐熟溫度)와 C/N률(率)은 초기(初期)에 증가(增加)하였다가 그후(後) 감소(減少)하였으며 T-N 및 T-C함량(含量)은 시일(時日)이 경과(經過) 할수록 증가(增加)하였다. 4. 속성제품(速成製品)의 균일도(均一道)(위도분포(粒度分布))는 관행구(慣行區) 보다 약간(若干) 미세(微細) 하였으며 입도(粒度)는 -4.00+1.68mm가 가장 많았다. 5. 오이의 유식물(幼植物)은 속성구(速成區)가 관행구(慣行區) 보다 생육(生育)이 양호(良好)하였다.

• 암석학회지
• /
• 제8권1호
• /
• pp.1-13
• /
• 1999

The Latite Ridge Latite in the East Tintic volcanic field, Utah in USA occurs as a welded ash-flow tuff, has 63.7-66 wt% $SiO_2$ on an anhydrous basis, and shows calc-alkaline affinities. The rocks fall in the trachyte field of IUGS classification. It is characterized by unusally high $K_2O$ content (5.9-7.6 wt%), relatively high equilibration temperature (950-973$^{\circ}C$), and biotites with high $TiO_2$ content (7.4-8.2wt%). Various differentiation processes were tested using the XLFRAC program to infer the origin of the Latite Ridge Latite. The results suggests that crystal fractionation from shoshonite is one possible process to generate the Latite Ridge Latite. Shoshonite of the East Tintic volcanic field was possibly formed by crystal fractionation from a subduction-related K-, Mg-rich mafic magma.

• 한국자동차공학회논문집
• /
• 제2권2호
• /
• pp.95-102
• /
• 1994

Aluminum sheet application to automobile body panels has now become an important objective to meet the requirements of automobile weight reduction. As the Mg content in Al-Mg based alloys increased up to 7.19%, the strength and elongation increased. For instance. Al-7.19Mg alloy had a high strength of 305MPa and a high elongation of 35%. A study was also made to investigate the interrelation between grain size and tensile properties with varying the contents of Mg, Ti and Zr elements and annealing conditions. The yield stress decreased as the grain size increased, which increased the uniform elongation. The strain hardening exponents n increased as the Mg content increased, which depended on the increasing difficulties of the cross slip of dislocation.

• 한국표면공학회지
• /
• 제34권3호
• /
• pp.247-257
• /
• 2001

In an effort to improve the dent resistance of exterior body panels at a reduced steel thickness, the bake hardenable steels added Ti or Nb with tensile strength of 35Kgf/$\textrm{mm}^2$ were investigated. The bake hardenability increased with the annealing temperature and solute carbon content. Bake hardening of 3 to 5Kgf/$\textrm{mm}^2$ was obtained in steels with a controlled solute carbon concentration range from 6 to 10ppm. The galvannealing temperature and time had little influence on the bake hardenability. The Fe-Zn alloying reaction of 35Kgf/$\textrm{mm}^2$ BH steel was remarkably retarded due to a 0.07%P addition. The optimum galvannealing temperatures of 35Kgf/$\textrm{mm}^2$ BH steel were ranged from 520 to 56$0^{\circ}C$ in view of the Fe content and powdering resistance. The cross-section and planar views of the galvannealed coatings to characterize morphology development were discussed.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권1호
• /
• pp.20-25
• /
• 1997

In this study, piezoelectric actuator samples were fabricated using 0.375PMN-0.37OPT-0.255PZ system ceramics with Barium substitution and the strain properties of them were investigated. Dielectric constant of the specimens increased with the increase of Ba content up to 5mol% and decreased with futher addition of Ba. The largest piezoelectric coefficient and electromechanical coupling coefficient were observed at the sintering temperature of 1250'C and Barium content of 5mol%. The characteristics of strain hysteresis was found largely with varing the sintering temperature on the single round type, and the strain is proportional to piezoelectric coefficient.

• 한국주조공학회지
• /
• 제17권4호
• /
• pp.371-378
• /
• 1997

The study for direct synthesis of TaC carbide which was a reaction product of tantalum and carbon in the cast iron was performed. Cast iron which has hypo-eutectic composition was cast bonded in the metal mold with tantalum thin sheet of thickness of $100{\mu}m$. The contents of carbon and silicon of cast iron matrix was controlled to have constant carbon equivalent of 3.6. The chracteristics of microstructure and the formation mechanism of TaC carbide in the interfacial reaction layer in the cast iron/tantalum thin sheet heat treated isothermally at $950^{\circ}C$ for various time were examined. TaC carbide reaction layer was grown to the dendritic morphology in the cast iron/tantalum thin sheet interface by the isothermal heat treatment. The composition of TaC carbide was 48.5 at.% $Ti{\sim}48.6$ at.% C-2.8 at.% Fe. The hardness of reaction layer was MHV $1100{\sim}1200$. The thickness of reaction layer linearly increased with increasing the total content of carbon in the cast iron matrix and isothermal heat treating time. The growth constant for TaC reaction layer was proportional to the log[C] of the matrix. The formation mechanism of TaC reaction layer at the interface of cast iron/tantalum thin sheet was proved to be the interfacial reaction.

• 한국재료학회지
• /
• 제14권11호
• /
• pp.764-768
• /
• 2004

Perovskite Pb(Mn_{1/3}Sbu_{2/3})O_2-Pb(Zr,Ti)O_3\;(PMS-PZT) was prepared and ZnO doping effects on its piezoelectric properties were investigated. Pyrochlore phase was not identified in the PMS-PZT ceramics with $0\sim5\;mol\%$ ZnO sintered at $1100^{\circ}C$ for 2 hrs, and maximum sintered density of $7.92 g/cm^3$ was obtained. Piezoelectric charge constant and voltage constant increased to $359{\times}10^{-12}\;C/N\;and\;22.5{\times}10^{-13}\;Vm/N$, respectively, with increasing ZnO content. Mechanical quality factor reduced considerably with increasing ZnO content. When the ZnO content was 3 $mol\%$, electromechanical coupling factor and relative dielectric constant showed maximum values of $56\%$ and 1727, respectively. This should be evaluated by complicated variations of sintered density, tetragonality of lattice, grain size, and A-site vacancy generated by ZnO addition and $Zn^{2+}$ substitution.

• 한국응용과학기술학회지
• /
• 제17권2호
• /
• pp.67-75
• /
• 2000

Cosmetic industries have recently developed sun-block products, which are composed of W/O or O/W emulsion system. It was very difficult for waterproofing product to show the stability in W/O emulsion with $TiO_{2}$. To enhance the stability of W/O emulsion, it needs to be combined with the water and oil soluble components as the gelling agents. The emulsifiers used in W/O were 3.0% of cetyl dimethicone copolyol, 2.0% of sorbitan sesquioleate as the basic emulsifiers, and 0.6% of quaternium-18 bentonite and 1.5% of dextrin palmitate as stabilizer were used. The content of titanium dioxide was optimized up to 8.0%. Titanium dioxide was used as the UV scattering powder coated with $Al_{2}O_{3}$(UV-sperse T40/TN). The sunscreen cream prepared with W/O emulsion system by using QB and DP showed higher stability than that of W/O emulsion system by using each QB and DP. W/O emulsion from Formula 3 for passing one year was very durable more than F1 and F2. Within W/O emulsion by observing F1, F2 and F3 for one year, F3 was more excellent than F2 and F3 when they were observed at RT, $4^{\circ}C$, $40^{\circ}C$, because F3 used the mixed QB and DP in W/O emulsion. The zeta potential for F1, F2, and F3 after one year were 21, 30 and 43, respectively. From these result F3 was found best stable emulsion. The in-vitro SPF value for F3 was 35 for the initial product at room temperature and also, the in-vitro SPF values of F3 was 32 for after one year. Finally, the mean in-vivo SPF value of 10 volunteers for F3 was 27.3 by the Korea cosmetic association made the rules of SPF.

• 한국가스학회지
• /
• 제11권1호
• /
• pp.29-33
• /
• 2007

[ $TiO_{2},\;Pd,\;Pt$ ]와 In을 사용하여 trimethylamine gas에 대한 감도를 향상시키는 $SnO_{2}$ 가스센서에 대하여 연구하였다. 금속-$SnO_{2}$ 후막은 백금전극이 내장된 알루미나 지지체에 스크린 법으로 제작하였다. 센서의 특성은 검출가스 농도의 함수로서 반응기내 각 센서의 전기적 저항을 측정하여 조사하였으며, $100{\sim}1000ppm$범위의 trimethylamine, dimethylamine과 암모니아가스에 대하여 측정하였다. 그 결과, 금속-$SnO_{2}$의 가스 검출특성은 금속의 종류와 양에 따라 결정되었으며, $250^{\circ}C$에서 trimethylamine에 대한 센서의 감도와 선택성은 1 wt%, Pd와 10 wt%, $TiO_{2}$를 첨가하였을 때 감도가 가장 우수한 것으로 나타났다.

• Korean Chemical Engineering Research
• /
• 제56권5호
• /
• pp.718-724
• /
• 2018

본 연구에서는 농도구배형 공침합성법을 통해 $Ni_{0.9}Co_{0.05}Ti_{0.05}(OH)_2$ 전구체를 제조하였다. 높은 니켈함량의 양극 활물질에서 나타나는 산소 탈리에 따른 구조변화문제를 극복하기 위하여 소성온도 변화에 따른 양극 활물질의 물리적, 전기화학적 분석방법을 사용하여 조사하였다. $Li_{1.05}Ni_{0.9}Co_{0.05}Ti_{0.05}O_2$의 물리적 특성은 FE-SEM, XRD, TGA를 이용하여 분석하였다. 양극 활물질과 $LiPF_6$(EC:EMC=1:2 vol%) 전해질을 사용하여 제조한 코인셀의 전기화학적 성능은 초기 충 방전 효율, 사이클 유지율 및 율속 테스트를 통해 분석하였다. 제조된 양극재의 초기 충전 용량 및 초기효율은 소성온도 $750{\sim}760^{\circ}C$에서 244.5~247.9 mAh/g, 84.2~85.8%로 우수하였다. 또한 용량 보존율은 50사이클 후에 97.8~99.1%의 높은 안정성을 나타내었다.