• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1384-1386
• /
• 2001

In this paper, the structural and electrical properties of the $Sr_{1-x}Ca_xTiO_3$($0{\leq}x{\leq}0.2$)-based grain boundary layer ceramics were investigated by X-ray, SEM and V-I system. Increasing content of Ca, the average gram size and the lattice constant were decreased. The relative density of all specimens was > 96%. The 2nd phase formed by thermal diffusing from the surface lead to a very excellent electrical properties, that is, ${\varepsilon}_r$ > 50000, tan${\delta}$ < 0.05, $\Delta$C < ${\pm}$ 10%.

• 한국세라믹학회지
• /
• 제25권1호
• /
• pp.42-48
• /
• 1988

Commercially available PTCR (Postive Temperature Coefficient of Resistivity) ceramics which have low room temperature resistance, high PTC effect and temperature coefficient were prepared by La3+ doped semiconducting barium calcium titanate soild solutions. PTCR characteristics were remarkably improved by addition of AST (1/3 Al2O3$.$3/4SiO2$.$1/4TiO2) and MnCl2. That can be explained by formation of liquid phase during sintering and acceptor level on the intergranular layer. Resistivity anormaly increased with decreasing cooling rate. Optimum manufacturing conditions were cooling rate below 100$.$C/hr, Ca and Mn content of 4 mol% &, 0.09-0.12mol% respectively.

• 한국주조공학회지
• /
• 제19권6호
• /
• pp.472-483
• /
• 1999

The effects of rapid solidification and Cr addition to the microstructure variations of the rapid solidified Ti-48Al-xCr(X = 2,4,6) alloys have been investigated using X-ray diffractometry, optical microscopy, scanning electron microscopy and transmission electron microscopy. The segregated coarse ${\gamma}$ phase was eliminated and the microstructure was refined by rapid solidification of the cooling rate of $10^4-10^6\;^{\circ}C/sec$. The lattice parameters and tetragonality of ${\gamma}$ phase decrease with the increase Cr content and by the rapid solidification. Non-equilibrium phase ${\alpha}$ remains at room temperature condition, which would be resulted from the restriction of phase transformation ${\alpha}$ to ${\alpha}_2+{\gamma}$.

• 청정기술
• /
• 제8권4호
• /
• pp.173-180
• /
• 2002

본 연구에서는 MLCC의 원료인 $BaTiO_3$ 분말에 첨가제를 코팅한 core-shell 구조의 복합분말을 제조하였다. 이러한 복합분말은 MLCC 제조공정에서 VOC의 배출을 억제할 뿐만 아니라, MLCC의 초고용량화 및 신뢰성 향상을 목적으로 한다. 첨가제의 성분 및 함량은 국내 MLCC 제조기업으로부터 조사하였으며, 본 연구에서는 $Y_2O_3$와 $MnCO_3$ 두 성분에 대하여 연구하였다. 두 성분의 염은 $70^{\circ}C$이상의 반응온도에서 요소분해반응을 통해서 $BaTiO_3$분말의 표면에 동시에 그리고 균일하게 코팅될 수 있음이 확인되었다. 원소분석 결과, 코팅성분의 함량은 초기에 설정한 값과 근접하게 유지됨을 알 수 있었다. 본 연구실험 결과, 첨가제의 균일코팅을 위해서는 PVP 등의 분산제 역할이 크지 않은 반면, 반응온도 및 반응시간의 최적상태 유지가 매우 중요함이 확인되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.15-17
• /
• 2005

In this study, tunable dielectric materials are important for resonator, variable capacitor, phased array antenna and other devices application. In this paper, Dielectric constant increased and tuning range increased with the increased of $BaSrTiO_3/Li_{2}CO_{3}$ content, which probably can be explained by the substitution of Ba3+, Li1+ on BaTiO3 lattice. The tunability and dielectric loss of the $BaSrTiO_2/Li_{2}CO_{3}$ thick film, sintered at $1150^{\circ}C$, were about 43 % and 0.234 at 10$\sim$15 MHz, respectively. In case of BaSrTi/MgO, Dielectric constant decreased and tenability increased with the added of $BaSrTiO_3/MgO$. The ferroelectrics properties were distinct when adding Li to BST ceramic thick film, and paraelectrics pattern was distinct when adding Mg.

• Journal of Welding and Joining
• /
• 제16권2호
• /
• pp.93-99
• /
• 1998

The effects of welding conditions of gas metal arc welding on the elements loss of solid wire, oxygen content and impact toughness of weld metals were studied. Deoxidizing elements loss was increased with increase of arc voltage in both short-circuit transfer mode and globular transfer mode. It is believed that increase of arc voltage results in increase of reaction time between elements in the droplet and surrounding gas at the end of wire and in the arc column. Based on the thermodynamic equilibrium model, the oxygen content of weld metal can be predicted with the content of silicon and manganese as following : [%O] = $K([%Si][%Mn])^{-0.25}$, K = -15518/T+6.01. The equilibrium temperature was dependent on shielding gas, and it was 187$0^{\circ}C$ for $CO_2$ gas and 180$0^{\circ}C$ for 20%$CO_2$-80%Ar gas. The oxygen content of weld metal which shows maximum impact toughness was varied with deoxidizing alloy system of wires, 0.041 wt% for Si-Mn type wire and 0.026 wt% for Si-Mn-Ti type wire.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 센서 박막재료 반도체 세라믹
• /
• pp.190-193
• /
• 2003

Sm-doped lead zirconate titanate($Pb_{1.1}(Zr_{0.6}Ti_{0.4})O_3$; PZT) thin films on the Pt(111)/Ti/$SiO_2$/Si(100) substrates prepared by a sol-gel method. The effect on structural and electrical properties of PZT thin films measured according to the Sm content. Sm-doping altered significantly dielectric and ferroelectric properties. The remanent polarization and the coercive field decreased with the increasing Sm content. The dielectric constant and the dielectric loss of PZT thin films decreased with the increasing Sm content. At 100 kHz, the dielectric constant and the dielectric loss of. the 0.3 mol% of Sm-doped PZT thin film were 1200 and 0.12 respectively. The remanent polarization (2Pr) of the 0.3 mol% of Sm-doped PZT thin film was $52.13{\mu}C/cm^2$ and the coercive field was 94.01 kV/cm. The 0.3 mol% of Sm-doped PZT thin film showed an improved fatigue characteristic comparing to the undoped PZT thin film.

• 한국재료학회지
• /
• 제20권12호
• /
• pp.654-660
• /
• 2010

The influences of Na and K content on the crystal phase, the microstructure and the electrical property of $BaTiO_3$-based thermistors was found to show typical PTC effects. The crystal phase of powder calcined at $1000^{\circ}C$ for 4hrs showed a single phase with $BaTiO_3$, and the crystal structure was transformed from tetragonal to cubic phase according to added amounts of Na and K. In XRD results at $43^{\circ}\sim47^{\circ}$, the $(Ba_{0.858}Na_{0.071}K_{0.071})(Ti_{0.9985}Nb_{0.0015})O_{3-\delta}$ showed (002) and (200) peaks but the $(Ba_{0.762}Na_{0.119}K_{0.119})(Ti_{0.9975}Nb_{0.0025})O_{3-\delta}$ showed (002), (020) and (200) peaks. In sintered bodies, those calcined at $600^{\circ}C$ rather than at $1000^{\circ}C$ were dense, and for certain amounts of Na and K showed rapid decreases in grain size. In relative permittivity, the curie temperature due to the transformation of ferroelectric phase rose with added Na and K but decreased in terms of relative permittivity. In the result of the R-T curve, the sintered bodies have curie temperatures of about $140^{\circ}C$ and the resistivity of sintered bodies have scores of $\Omega{\cdot}cm$; the jump order of sintered bodies was shown to be more than $10^4$ in powder calcined at $1000^{\circ}C$.

• 한국재료학회지
• /
• 제7권3호
• /
• pp.196-202
• /
• 1997

PLT 박막의 증착방법으로 ECR PECVD법을 이용한 경우 $440~500^{\circ}C$의 비교적 낮은 온도에서 순수한 perovskite구조를 가진$(Pb,La)TiO_{3}$박막을 성공적으로 제조하였다. 기판온도 증가에 따라 반응기체 및 산화물(특히 Pb oxkde)의 휘발성이 증대되어 증착속도가 감소하고 (Pb oxide)의 휘발성이 증대되어 증착속도가 감소하고 (Pb+La)/Ti조성비가 감소하였다. $460~480^{\circ}C$의 온도범위에서 증착한 PLT 박막이 화학양론비를 가장 잘 만족하였으며 이때 높은 유전상수와 가장 우수한 누설전류 특성을 나타내었다. $La(DPM)_{3}$ 유입량 증가에 따라 $(Pb, La)TiO_{3}$ 박막의 La 조성이 거의 직선적으로 비례하여 증가하였는데 La/Ti비가 3.0%에서 9.5%까지 증가함에 따라 PLT 박막의 유전 상수는 360부터 650까지 증가하였고 100kV/cm 전기장하에서의 누설전류도 $4{\times}10^{-5}$에서 $4{\times}10_{-8}A/cm^2$로 향상되었다.

• 대한토목학회논문집
• /
• 제41권4호
• /
• pp.357-364
• /
• 2021

본 연구에서는 서로 다른 종류의 TiO₂ 혼입이 시멘트 페이스트의 수화특성 및 질소산화물 제거성능에 미치는 영향에 대해 조사하였다. 상용 제품인 P-25와 NP-400, 폐수 슬러지에서 제조된 GST, 총 세 종류의 TiO₂를 시멘트 무게대비 0, 5, 10, 20 % 첨가하여 시멘트 페이스트의 수화특성 및 질소산화물 제거성능을 분석하였다. 미소수화열 측정결과 TiO₂의 혼입은 시멘트 페이스트의 초기 수화반응에 큰 영향을 미치는 것이 확인되었으며, P-25, NP-400, GST 순으로 더 높은 누적 발열량을 나타내었다. 이로 인해 Rietveld 분석결과 TiO₂ 혼입 샘플에서 더 많은 C-S-H의 생성량이 관찰되었으며, 이는 TiO₂ 혼입 시멘트 페이스트의 28일 압축강도 증가에 영향을 미친 것으로 판단된다. SEM/EDS 분석결과 P-25, GST, NP-400 순으로 페이스트 샘플 표면에 더 많은 Ti 원소의 함량이 관찰되었지만, NO_x 제거 성능은 P-25, NP-400, GST 순으로 우수한 것으로 확인되었다.