• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2000년도 춘계학술강연 및 발표대회 강연 및 발표논문 초록집
• /
• pp.12-12
• /
• 2000

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 1999년도 춘계학술대회 및 발표대회 강연 및 발표논문 초록집
• /
• pp.28-28
• /
• 1999

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2002년도 추계학술강연 및 발표대회
• /
• pp.32-32
• /
• 2002

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2003년도 춘계학술강연 및 발표대회
• /
• pp.40-41
• /
• 2003

• 한국분말재료학회지
• /
• 제15권1호
• /
• pp.53-57
• /
• 2008

The amorphous $Fe_{73}Si_{16}B_7Nb_3Cu_1$(at%) alloy strip was pulverized using a jet mill and an attrition mill to get flake-shaped powder. The flake powder was mixed with dielectric $BaTiO_3$ powder and its dispersant to increase the permittivity. The powders covered with dielectric powders and its dispersant were mixed with a binder and a solvent and then tape-cast to form sheets. The absorbing properties of the sheets were measured to investigate the roles of the dielectric powder and its dispersant. The results showed that the addition of $BaTiO_3$ powders and its dispersant improved the absorbing properties of the sheets noticeably. The powder sheet mixed with 5 wt% of $BaTiO_3$ powder and 1 wt% of dispersant showed the best electromagnetic wave absorption rate because of the increase of the permittivity and the electrical resistance.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2001년도 추계학술강연 및 발표대회
• /
• pp.13-13
• /
• 2001

• 한국분말재료학회지
• /
• 제17권5호
• /
• pp.385-389
• /
• 2010

Titanium powders have been usually produced by de-hydrogenating treatment in vacuum with titanium hydride ($TiH_2$) powders prepared by milling of hydrogenated sponge titanium, $TiH_x$. The higher stoichiometry of x in $TiH_x$, whose maximum value is 2, is achieved, crushing behavior is easier. $TiH_x$ powder can be, therefore, easy to manufactured leading to obtain higher recovery factor of it. In addition, contamination of the powder can also minimized by the decrease of milling time. In this study, the hydrogenation behavior of sponge titanium was studied to find the maximum stoichiometry. The maximum stoichiometry in hydride formation of sponge titanium could be obtained at $750^{\circ}C$ for 2 hrs leading to the formation of $TiH_{{\sim}1.99}$ and the treating temperatures lower or higher than $750^{\circ}C$ caused the poor stoichiometries by the low hydrogen diffusivity and un-stability of $TiH_x$, respectively. Such experimental behavior was compared with thermodynamically calculated one. The hydrogenated $TiH_{1.99}$ sponge was fully ball-milled under -325 Mesh and the purity of pure titanium powders obtained by de-hydrogenation was about 99.6%.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 1998년도 춘계학술대회 및 발표대회 강연 및 발표논문 초록집
• /
• pp.11-12
• /
• 1998

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 추계학술대회 논문집
• /
• pp.197-200
• /
• 2008

본 연구에서는 Ketjen black을 이용한 DSCs (Dye-sensitized solar cells)용 다공질의 $TiO_2$ nano-powder 제작기술을 제안한다. $TiO_2$ powder는 sol-gel연소법에 의해 Ti-isopropoxide와 2-propanol을 사용하여 제작되었으며, Ketjen black의 함량($0g{\sim}2g$)을 달리하여 제작된 $TiO_2$ nano-powder의 다공성과 입자의 크기 결정성등의 특성을 고찰하였다. 또한 이러한 $TiO_2$ powder를 paste로 만들어 다른 열처리 온도($100^{\circ}C{\sim}600^{\circ}C$)에서 $TiO_2$ 박막을 이용한 DSCs를 제작한 후 그 효율을 측정하였다. 그 결과 Ketjen black 1g을 함유시켜 만들어진 $TiO_2$ powder의 다공성과 입자 크기가 가장 우수한 것으로 FE-SEM의 측정결과 나타났으며 또한 이 때의 $TiO_2$ powder는 FT-IR의 측정 결과, Ti-O-Ti의 결합구조를 가진 성분과 $H_2O$ 성분으로 구성되어 있음을 알 수 있었다. 그리고 여러 온도에서 제작된 DSCs 실험 셀 중 $500^{\circ}C$의 열처리 공정을 거적 제작된 셀의 효율이 가장 높은 효율이 5.46%를 나타내고 있음을 확인할 수 있었다.

• 한국분말재료학회지
• /
• 제23권3호
• /
• pp.202-206
• /
• 2016

A Ni-Ti-B alloy powder prepared by mechanical alloying (MA) of individual Ni, Ti, and B components is examined with the aim of elucidating the phase transitions and crystallization during heat treatment. Ti and B atoms penetrating into the Ni lattice result in a Ni (Ti, B) solid solution and an amorphous phase. Differential thermal analysis (DTA) reveals peaks related to the decomposition of the metastable Ni (Ti, B) solid solution and the separation of equilibrium $Ni_3Ti$, $TiB_2$, and ${\tau}-Ni_20Ti_3B_6$ phases. The exothermal effects in the DTA curves move to lower temperatures with increasing milling time. The formation of a $TiB_2$ phase by annealing indicates that the mechanochemical reaction of the Ni-Ti-B alloy does not comply with the alloy composition in the ternary phase diagram, and Ti-B bonds are found to be more preferable than Ni-B bonds.