• 제목/요약/키워드: Ti powder

검색결과 1,433건 처리시간 0.029초

The Effect of Pretreatment for Cemented Carbide Substrate Using Wet Blasting

  • Hong, Sung-Pill;Kim, Soo-Hyun;Kang, Jae-Hoon;Yoon, Yeo-Kyun;Kim, Hak-Kyu
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
    • /
    • pp.1102-1103
    • /
    • 2006
  • The pretreatment for substrate was carried out in change of gun pressure of $0.5\sim3.5$ bar using wet blasting. The size of $Al_2O_3$ powder was about $50{\sim}150{\mu}m$. As the results, the surface roughness of cemented carbide substrate was improved with increment of gun pressure of wet blasting. A new surface layer was formed and Co particles were uniformly distributed over the entire surface after pretreatment. The adhesion of the pretreated substrate in same PVD-TiAlN film was improved and in approximately $Ra=90\sim120\;nm$ shown the best adhesion value.

  • PDF

The Seeding Effects on the Phase Transformation of Sol-Gel Derived PZT Powder

  • Lee, Hyun-Tae;Lee, Wan-In;Kim, Yoo-Hang;Whang, Chin-Myung
    • Bulletin of the Korean Chemical Society
    • /
    • 제23권8호
    • /
    • pp.1078-1084
    • /
    • 2002
  • The formation temperature for the perovskite lead zirconate titanate [Pb(Zr,Ti)O3, PZT] derived from sol-gel route was lowered by more than $100^{\circ}C$ with the addition of crystallographically suitable seed particles, such as barium titanat e (BT) or PZT. We investigated the effect of seeding on the crystallization of perovskite phase and in the microstructure of the sol-gel derived PZT powder by varying the concentration, size and chemical species of seed particles. The phase transition as a function of temperature was monitored by DTA, XRD, and Raman spectroscopy, and the interface between the seed particle and grown PZT layer was analyzed by SEM and high resolution TEM techniques. It was found that both the heterogeneous and homogeneous nucleation contributes competitively in the formation of perovskite PZT grains.

용융염 합성법에 의한 PLZT 세라믹스의 제작과 그 전기적.광학적 특성 (Electrical and Optical Properties of PLZT Ceramics Prepared by Flux Method)

  • 남효덕
    • 한국세라믹학회지
    • /
    • 제23권4호
    • /
    • pp.62-68
    • /
    • 1986
  • $(Pb_{1-x} La_x)(Zr_{0.65} Ti_{0.35})_{1-x/4}O_3$ (PLZT X/65/35) powders were prepared by molten salt synthesis using NaCl-K Cl and conventional calcining of oxides. The effects of molten salt on formation and charactrization of PLZT powder and on dielectric piezolectric and optical properties of PLZT ceramics were studied, The completed PLZT powder formation in the presence of fused salt was attained at 50-10$0^{\circ}C$ lower temperature than that in solid state reaction and the particle size of the powder made by molten salt synthesis was markedly increased with increasing calcining temperature. The substitution of Na and/or K ions in NaCl-KCl for Pb ion in process of molten salt synthesis was increased with increasing La concentration Z. These substituted Na and/or K ions were identified as the origins of decreasing coupl-ing factor and optical transmittance of PLZT ceramics.

  • PDF

후막 EL소자를 이용한 정보 표시형 Flexible 디스플레이 (The Flexible Information Display Using Powder Electroluminescent Device)

  • 이종찬;김현후;박대희
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제50권5호
    • /
    • pp.207-210
    • /
    • 2001
  • In this paper, the Flexible information display was implemented uing AC powder electroluminescent device. ZnS:Cu and $BaTiO_3$ were used as a phosphor and dielectric respectively. The growth of phosphor and dielectric layer was performed with screen printing. The flexible information display in this paper was categorized as following; EL display, driving circuit, software for driving. EL spectrum and brightness was measured as the device properties.

  • PDF

Nozzles from Alumina Ceramics with Submicron Structure Fabricated by Radial Pulsed Compaction

  • Kaygorodov, Anton;Rhee, Chang;Kim, Whung-Whoe;Ivanov, Viktor;Paranin, Sergey;Spirin, Alexey;Khrustov, Vladimir
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
    • /
    • pp.368-369
    • /
    • 2006
  • By means of magnetic pulsed compaction and sintering of weakly aggregated alumina based nanopowders the jet forming nozzle samples for the hydroabrasive cutting were fabricated. The ceramics was obtained from pure alumina, as well as from alumina, doped by $TiO_2$, MgO and AlMg. It was shown that the samples sintered from AlMg doped $Al_2O_3$ powder have the best mechanical properties and structural characteristics: relative density ${\sim}0.97$, channel microhardness. - 18-20 GPa, channel surface roughness ${\sim}0.7\;{\mu}m$, average crystallite size ${\sim}1\;{\mu}m$.

  • PDF

Study on Metal/Diamond Binary Composite Coatings by Cold Spray

  • Kim, H.J.;Jung, D.H.;Jang, J.H.;Lee, C.H.
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
    • /
    • pp.240-241
    • /
    • 2006
  • Metal/diamond binary composite coatings on Al substrate without grit blasting were deposited by cold spray process with insitu powder preheating. Microstructural characterization of the as-sprayed coatings with different diamond size, strength and with/without Ti coating on diamond was carried out by OM and SEM. The assessment of basic properties such as tensile bond strength and hardness of the coatings, and the deposition efficiency was also carried out. Particular attention on the composite coatings was on the diamond fracture phenomenon during the cold spray deposition and the interface bonding between the diamond and the Fe-based metal matrix.

  • PDF

Fabrication and Properties of Nano-structured Ceramics

  • Ueno, Tomoyuki;Yoshimura, Masashi
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
    • /
    • pp.321-322
    • /
    • 2006
  • Nano-structured ceramics, which consist of structural elements with nanometer-size crystallites, are expected to show various unusual properties. We developed the novel nano-structured ceramics which consists of $Si_3N_4$ and TiN and a self-lubricant material. The ceramics was fabricated by powder metallurgy process using mechano-chemical grinding process and short-time sintering process. Each grain size of matrix and the self-lubricant particle was under about 50 nm and a few namometer. It showed high wear resistance and low friction coefficient by controlling of microstructure.

  • PDF

Characterization of Surface Properties of $BaTiO_3$ Powder by XPS

  • Chun, Myoung-Pyo;Cho, Jung-Ho;Kim, Byung-Ik
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
    • /
    • pp.678-679
    • /
    • 2006
  • The effects of particle size on the surface properties of hydro-thermally synthesized barium titanate powders were investigated by means of particle size analysis, specific surface area, SEM, zeta potential and XPS. Particle sizes were measured by laser light scattering and are in the range of 150 to 1100nm. Zeta potential increased with increasing particle size and it was large minus value in the range of particle size from 500 to 900nm, which seems to be related with the dissolution of $Ba^{2+}$ ion in these particle sizes from the analysis of surface properties by XPS.

  • PDF

탄화물의 첨가가 고속도강의 HIP과 마모에 미치는 영향 (EHect of Carbide Addition on Riping and Wear Properties of HSS)

  • 김득중
    • 한국분말재료학회지
    • /
    • 제3권3호
    • /
    • pp.188-195
    • /
    • 1996
  • In recent times the potential application of the high speed steel produced by HIP process for wear resistant and cutting materials are increasing. In this work the microstructure of Anval 30 produced by HIP process was investigated and the effect of WC, TiC addition on microstructure formation and wear properties were studied. After HIP process at 1150 $^{\circ}C$, the original feature of spherical raw powders was not removed and consequently, nonuniform microstructure was formed. However the WC added by simple powder mixture incereased the sinterbility of high speed steel and uniform microstructure formed. The wear characteristics of Anval 30 with carbide addition were tested at RT and $600^{\circ}C$. The uniform microstructure played an more important role in wear resistance as compared with the hardness.

  • PDF

수열합성법에 의한 TiO2 분말 제조와 광촉매 특성 (Preparation of TiO2Powder by Hydrothemal Precipitation Method and their Photocatalytic Properties)

  • 김석현;정상구;나석은;김시영;주창식
    • Korean Chemical Engineering Research
    • /
    • 제51권2호
    • /
    • pp.195-202
    • /
    • 2013
  • 본 연구에서는 Titanium(IV) sulfate($Ti(SO_4)_2$)와 암모니아수로부터 수열합성법을 이용하여 비교적 낮은 합성온도($80{\sim}100^{\circ}C$)와 상압에서 소성과정을 거치지 않고 $TiO_2$ 분말을 제조하였고, $TiO_2$ 제조 시 반응온도, 반응물의 초기농도, 혼합용액의 pH와 같은 반응조건에 따른 $TiO_2$ 입자의 결정구조와 입자분포, 형상 등과 같은 물리적 특성을 고찰하였다. 제조한 시료는 UV 조사 하에 Brilliant Blue FCF(BB-FCF)의 광분해 실험을 실시하여 광분해 성능과 DRS 분석을 통해 광촉매 활성을 비교하였다. 제조한 시료의 물성은 XRD, SEM, PL, 입도분포 측정을 통하여 확인하였다. Titanium(IV) sulfate($Ti(SO_4)_2$)의 초기농도가 증가할수록 $TiO_2$의 평균 입자크기와 결정화도는 증가하였고 광촉매 활성은 감소하였다. 혼합용액의 pH가 높을수록 평균 입자크기는 감소하였고 광촉매 활성은 증가하였다. 반응온도가 높을수록 결정화도와 광촉매 활성은 증가하였다. 이상의 결과들로부터 $Ti(SO_4)_2$와 암모니아수를 이용한 비교적 낮은 합성온도와 상압에서의 수열합성법으로도 순수한 anatase 결정구조의 $TiO_2$가 제조됨을 확인할 수 있었다.