• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.28-30
• /
• 2007

Need analysis of correct thrust for control performance improvement of HB-LPM (Hybrid type Linear Pulse Motor). It is difficult to analyze HB-LPM's thrust. In this paper, HB-LPM's thrust is expressed to mathematical expression. And it is proved validity of this numerical formula by thrust measurement system. Two phase driver is composed. It is verified validity of numerical formula that measure waveform of electric current and voltage that is supplied in each Phase. In this study, composed two phase drive driver, advantage of this IGBT element 6 by accumulated IPM module 1 Driver composition possible. That is, can economize 1 module. In other words, Driver composition is available by IGBT or metal oxide semiconductor field effect transistor element 4. This is economical big gains.

• 항공우주기술
• /
• 제3권2호
• /
• pp.183-190
• /
• 2004

액체로켓용 연료펌프의 설계를 검증하기 위해 상용 3차원 유동해석 소프트웨어를 이용하여 설계점 성능을 예측하였다. 연료펌프의 성능과 축추력에 영향을 미치는 누설유량에 대한 예측의 정확도를 높이기 위해 인듀서, 임펠러, 볼류트 및 2차 유로를 계산영역으로 설정하였으며 인듀서/임펠러/누설유로/볼류트 사이의 경계면에 혼합면 기법을 적용하여 계산에 소요되는 시간을 줄이고자 하였다. 유동해석을 통해 예측된 수력성능은 설계요구조건을 만족시키는 것으로 나타났으나 축추력이 허용치에 비해 크게 예측되어 이를 감소시키기 위한 설계변경이 이루어졌다. 변경된 설계안에 대한 유동해석을 수행한 결과 연료펌프의 수력성능은 유지되면서 축추력은 처음의 설계안에 비해 30% 수준으로 크게 감소하였음을 확인할 수 있었다.

• 제어로봇시스템학회논문지
• /
• 제18권2호
• /
• pp.76-80
• /
• 2012

This paper demonstrates how to implement inherent pitching stability in an insect-mimicking flapping-wing system for vertical takeoff. Design and fabrication of the insect-mimicking flapping-wing system is briefly described focusing on the recent modification. Force produced by the flapping-wing systems is estimated using the UBET (Unsteady Blade Element Theory) developed in the previous work. The estimation shows that the wing twist placed in the modified system can improve thrust production for about 10 %. The estimated thrust is compared with the measured thrust, which proves that the UBET provides fairly good estimations for the thrust produced by the flapping-wing systems. The vertical takeoff test shows that inherent pitching stability can be implemented in an insect-mimicking flapping-wing system by aligning the aerodynamic force center and center of gravity.

• 제어로봇시스템학회논문지
• /
• 제14권12호
• /
• pp.1302-1312
• /
• 2008

Relaxed Static Stability(RSS) has been applied to improve flight performance of modern version supersonic jet fighters. Flight control systems are necessary to stabilize an unstable aircraft and to provide adequate handling qualities. Also, flight control systems of modern aircraft employ many safety measure to cope with emergency situations such as a pilot unknown attitude flight conditions of an aircraft in night flight-testing. This situation is dangerous because the aircraft can lose if the pilot not take recognizance of situation. The system called the "Pilot Activated Recovery System" or PARS, provided a pilot initiated automatic maneuver capable of an aircraft recoveries in situations of unusual attitudes, speed and altitude. This paper addresses the concept of PARS with AARS(Automatic Attitude Recovery System), ATCS(Automatic Thrust Control System) and MARES(Minimum Altitude Recovery Estimation System), and this control law is designed by nonlinear control law design process based on model of supersonic jet trainer. And, this control law is verified by real-time pilot evaluation using an HQS(Handling Quality Simulator). The result of evaluation reveals that the these systems support recovery of an aircraft unusual attitude and speed, and improve a safety of an aircraft.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권4호
• /
• pp.965-980
• /
• 2014

This paper presents a new estimation method of full scale propulsive performance for the pulling type podded propeller. In order to estimate the drag of pod housing, a drag velocity ratio, which includes the effects of podded propeller loading and Reynolds number, is presented and evaluated through the comparison of model test and numerical analysis. By separating the thrust of propeller blade and the drag of pod housing, extrapolation method of pod housing drag to full scale is deduced, and correction method of propeller blade thrust and torque to full scale is presented. This study utilized the drag coefficient ratio of the pod housing as a measure for expanding it to full scale, but in order to increase the accuracy of performance evaluation, additional study is necessary on the method for the full scale expansion via separating the drag of pod body, strut and fin which consist the pod housing.

• 한국추진공학회지
• /
• 제16권5호
• /
• pp.29-36
• /
• 2012

연소시험을 통한 성공/실패 사례가 있는 FASTRAC 연소기에 대해, 효용성이 검증된 3차원 선형 음향해석을 수행하여 음향공의 물성치 변화에 따른 감쇠 특성을 파악하였다. 음향공의 동조주파수와 감쇠능력을 정량화하기 위해 음향 임피던스 개념을 도입하였다. 기하학적 형상이 주어진 상태에서, 음향공 내부의 음속 변화에 따라 최적의 동조가 가능한 음속을 파악하였다. 최적의 동조가 이루어지기 위한 음향공 내부의 음속 예측 방법을 제시하였다. 이를 통하여 여러 기하학적 형상을 가지는 음향공에 대하여 적용하여 감쇠능력을 정량화함으로써 연소안정성의 확보 여부에 대한 검토가 가능할 것이며, 안정성이 확보되지 못한 경우에 대해서는 그 이유를 명확하게 규명할 수 있을 것이다.

• 한국해양공학회지
• /
• 제25권1호
• /
• pp.27-31
• /
• 2011

The previously developed method of estimating the propulsion performance of a UUV was applied to the high speed UUV, which is propelled by commercial thrusters. The thrusters were selected with an overdesign mentality; in other words, their capacities were excessive. At that point, the designer's concern was focused on a question regarding at what rpm the UUV could reach the design speed. Because the developed method required thrust coefficient curve data, the researchers asked for the POW data of the thrusters from the manufacturer. From the data, the researchers extracted the thrust coefficient and estimated the rpm value of design speed for the UUV. Finally, the researchers compared the estimated value and the result from a self-propulsion test using a VPMM (Vertical planar motion mechanism) test at a towing tank in MOERI.

• Journal of Biosystems Engineering
• /
• 제26권1호
• /
• pp.1-10
• /
• 2001

Interactions between cage wheel and soil under the wet paddy field condition were analyzed. The cage wheel as a traction aid to driving tires of tractor was attached to the outside of the tires. The driving torque transmitted only to the cage wheel was measured and its effect on the total driving torque by both the tires and cage wheel was analyzed. Mathematical models were developed to predict the soil thrusts y a single lug and by the cage wheel with many lugs, respectively. Experimental results showed that as the diameter of cage wheel increased, positive effects of the cage wheel on the traction also increased. About 33-40% of the total traction force was obtained by the cage wheel with a diameter 1,182mm and 49-55% with a diameter 1,222mm. The peak thrust of the single lug of cage wheel increased by 31% and 59%, respectively when the diameter of the cage wheel increased from 1,182mm to 1,222mm and 1,262mm. The thrust by the cage wheel was estimated by using the developed mathematical models and the results were proved that the models are reliable for the estimation of the traction by the cage wheels.

• 한국항공운항학회지
• /
• 제30권4호
• /
• pp.23-32
• /
• 2022

Prototype UAMs are shown to us in the market. When the complete product is delivered to market, the efficiency of each UAMs can be compared by default. Before the complete product is shown to us, the comparative study on efficiency of UAMs is performed under the product cost estimation. The efficiency analysis result reveals that both of Lift & Cruise type and vectored thrust type show good efficiency at the initial stage of product. At the near terms stage, five years later from initial stage end, efficiency gets some change. Vectored thrust type of UAMs show best efficiency at the near term stage of product. Because UAMs will be used in urban area, Seoul is the place where the UAMs will be used first. The flying route from Seoul City Hall to Yongsan Park, National Assembly in Yeouido, and City Airport is no more than 10 km distance. For this short distance route, efficiency will make multi-rotor type UAM be prefered to other types. For long distance route or commuting route, life & cruise type and vectored thrust type of UAMs will be prefered on account of operational efficiency.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1996년도 The Korean Institute of Navigation 1996년도 한·중 국제학술 심포지움 및 추계학술발표회 논문집
• /
• pp.95-110
• /
• 1996

High Tensile Steel enables to reduce the plate thickness comparing to the case when Mild Steel is used. From the economical view point this is very preferable since the reduction in the hull weight. However to use the High Tensile Steel effectively the plate thickness may become thin so that the occurrence of buckling is inevitable and design allowing plate buckling may be necessary. If the inplane stiffness of the plating decreases due to buckling, buckling may be necessary. If the inplane stiffness of the plating decreases due to buckling the flexural rigidity of the cross section of a ship's hull also decreases. this may lead to excessive deflection of the hull girder under longitudinal bending. In these cases a precise estimation of plate's behavior after buckling is necessary and nonlinear analysis of isolated and stiffened plates is required for structural system analysis. In this connection this paper discusses nonlinear behaviour of thin plate under thrust. Based on the analytical method elastic large deflection analysis of isolated plate is perform and simple expression are derived to evaluate the inplane rigidity of plates subjected to uniaxial compression.