• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.379-382
• /
• 2017

Flow characteristics of dual bell nozzle with pintle were investigated. Thrust and thrust coefficient were compared with the pintle-bell nozzle of the same condition, and difference according to the pintle stroke was investigated. At stroke 0 mm, the thrust of the dual bell nozzle was about 13.18% higher than the bell nozzle, and when the pintle was backward, it was similar to the bell nozzle. The change in expansion ratio with stroke was considered to be more advantageous for a dual bell nozzle that performs altitude compensation through separation and transition.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.849-854
• /
• 2008

We have been developing a 1500N-thrust Swirling-Oxidizer-Flow-Type hybrid rocket engine. In order to put the engine into practical use, we conducted long duration burning experiments up to 25s to examine the influence of configuration change of fuel grain on the engine performance and designed an LOX vaporization nozzle to supply GOX for the 1500N-thrust engine. The experiment with a small hybrid rocket engine showed that combustion was stable and the engine performance was approximately constant during combustion. There was no essential problem to with increasing combustion time. The LOX vaporization nozzle designed had 30 rectangular channels with a depth of 0.5mm. During passing through the nozzle, the LOX increased in temperature and vaporized sufficiently.

• Physical Therapy Rehabilitation Science
• /
• v.10 no.2
• /
• pp.205-211
• /
• 2021

Objective: This study aimed to identify the effects of assuming different knee angles and hip abduction during bridge exercise and hip thrust exercise on lower body muscle activity. Design: Cross-sectional study Methods: Thirty-three healthy adults (18 men and 15 women) were instructed to perform the bridge and hip thrust exercises while randomly assuming 120°, 90° and 60° of knee flexion and 0° and 30° of hip abduction. EMG data (%maximum voluntary isometric contraction) were recorded three times from the erector spinae (ES), gluteus maximus (GM) and biceps femoris (BF) muscles of participant's dominant side and the mean values were analyzed. Results: The results showed that, during the hip thrust compared to the bridge exercise, there was significantly greater gluteus maximus muscle activity in all hip conditions while the biceps femoris activity was significantly less, and the erector spinae muscle activity was significantly greater with 30° of hip abduction (p<0.05). With all exercises, the erector spinae and the biceps femoris exhibited significantly greater muscle activity with 60° of knee flexion compared to 90° and 120° of knee flexion (p<0.05), and significantly greater muscle activity with 90° compared to 120° of knee flexion (p<0.05). In the case of the gluteus maximus, greater muscle activity was exhibited with 120° compared to 60° of knee flexion with all hip abduction conditions (p<0.05). Conclusions: It was effective for muscle activation of main agonists such as the gluteus maximus and erector spinae during thrust exercise, and the change in knee flexion angle was effective for muscle activation of the gluteus maximus. Therefore, it is considered that this study can be used as a selective indicator of the target movement angle during hip strengthening exercise for specific muscles.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.10
• /
• pp.1026-1030
• /
• 2010

This paper summarizes the activities performed for the development of a BLDC(Brushless Direct Current) motor driven cryogenic thrust control valve with application to KSLV-II rocket engine. The developed thrust control valve can modulate the flow rate of liquid oxygen under cryogenic temperature of 90K and high pressure of 113.2 bar with the help of electro-mechanical actuator driven by a BLDC motor. This valve can be applied to an engine combustion test after minor change because all development certification test have been performed successfully.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.8
• /
• pp.790-796
• /
• 2008

Typical solid rocket motors have a fixed propellant grain shape and nozzle throat size resulting in a fixed motor thrust. Pintle nozzle has been suggested as a means of providing variable thrust while maintaining the inherent advantage of solid rocket motors. In this study, the pintle shape effect on nozzle performance is investigated using experimental-aided Computational Fluid Dynamics(CFD). The pintle shape is modified by a principle of monotony. CFD analysis is performed using Fluent by applying the turbulent model. This analysis indicates that nozzle thrust and pintle load are influenced by change of nozzle shock pattern and flow separation due to pintle shape and there exists a high-performing pintle shape.

• Aerospace Engineering and Technology
• /
• v.3 no.2
• /
• pp.183-190
• /
• 2004

The performance analysis of a fuel pump for a liquid rocket engine has been performed numerically on its design condition. A commercial three-dimensional Navier-Stokes flow solver has been used for the computation. All of the fuel pump components - inducer, impeller, volute and secondary flow passages - are included in computation for the accurate estimation of the leakage flow rate which affects the performance and axial thrust. A pitchwise-averaged mixing plane method was used on the boundaries among the fuel pump components to save computational time. The predicted overall performance satisfied the design requirement. However, the axial thrust exceeded a permissible limit. In order to reduce the axial thrust, the secondary flow passage design has been changed. With this change, the axial thrust level has been reduced to 30% as compared with the original value.

• Nuclear Engineering and Technology
• /
• v.55 no.6
• /
• pp.2325-2334
• /
• 2023

To study the lubrication performance of tilting-pad thrust bearing (TPTBs) during start-up in nuclear pump, a hydrodynamic lubrication model of TPTBs was established based on the computational fluid dynamics (CFD) method and the fluid-structure interaction (FSI) technique. Further, a mesh motion algorithm for the transient calculation of thrust bearings was developed based on the user defined function (UDF). The result demonstrated that minimum film thickness increases first and then decreases with the rotational speed under start-up condition. The influence of pad tilt on minimum film thickness is greater than that of collar movement at low speed, and the establishment of dynamic pressure mainly depends on pad tilt and minimum film thickness increases. As the increase of rotational speed, the influence of pad tilt was abated, where the influence of the moving of the collar dominated gradually, and minimum film thickness decreases. For TPTBs, the circumferential angle of the pad is always greater than the radial angle. When the rotational speed is constant, the change rate of radial angle is greater than that of circumferential angle with the increase of loading forces. This study can provide reference for improving bearing wear resistance.

• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.4
• /
• pp.308-316
• /
• 2011

Although a yacht sails operate with large displacement due to very thin thickness, many studies for flow around yacht sails have not considered the sail deformation. The sail deformation not only caused a change in the center of effect(CE) on the sail but also a change in the thrust of the sail. The change of the CE and thrust affects the center of lateral resistance(CLR) and side forces of the hull, and the balance of the yacht. These changes affect the motion of the yacht which changes the velocity of the yacht. Thus, when analyzing the flow around yacht sails, the sail deformation should be considered. In the present study, fluid-structure-interaction(FSI) analysis of a two dimensional section of yacht sails was performed to consider the effects of sail deformation on the lift and drag performance. FSI and moving mesh methods were studied. Computational methods were verified using benchmark test cases such as the flow around horizontal and vertical cantilever beams. Shape deformation, pressure distribution, lift forces and separation flow were compared for both rigid and deformable sail.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.3
• /
• pp.28-34
• /
• 2019

The thrust control calculation according to the operation of plug nozzle for cold air test and the analysis of the flow characteristics of the pintle shape and operation pressure are performed. The numerical computation was verified by comparing the flow structure and the coefficient of thrust with the experimental data. It was confirmed that the nozzle throat was formed at the design position on each pintle shape, and thrust control up to 1:8 was achieved only by the stroke change. Finally, although the aerospike nozzle is autonomous, it is unfavorable in the under_expansion condition, if it is designed for a very low nozzle pressure ratio.

• Journal of Aerospace System Engineering
• /
• v.16 no.4
• /
• pp.1-9
• /
• 2022

A design factor analysis was conducted to reduce the thrust reduction in the off-design, due to the driving of the aerospike pintle nozzle. The close (NPR 100) as well as the open (NPR 11) stroke were fixed, as under-expansion conditions. The pintle contour, pintle head radius (R), cowl angle (θ), and cowl exit length (L) were selected as design factors. The change in thrust was analyzed, using a verified numerical analysis technique. First, the pintle head radius and the length of the cowl exit had little influence on the thrust. The cowl angle changed the mass flow rate by affecting the effective nozzle throat area, and created a reverse pressure gradient at the cowl exit. As a result of applying the dual aerospike contour, it was confirmed that the thrust in the design-off increased by approximately 1.2%, compared to the reference case and by approximately 3.4% compared to the worst case.