• 한국전자통신학회논문지
• /
• 제15권2호
• /
• pp.211-218
• /
• 2020

실내 환경에서 송수신기의 위치 변화에 따른 전파 전달 특성을 시뮬레이션을 통하여 예측하고, 경로손실 측정을 통하여 얻어진 결과를 예측결과와 비교하고 분석하였다. 경로손실 측정 환경으로는 대회의실을 선택하였으며, 또한 실내 장식물 및 비품이 없는 전시실을 선택하여 두 환경의 전파 전달 특성을 비교하였다. 각 실내 환경에서 송신기의 위치는 전방 벽면 중앙과 측면 벽면 중앙에 위치하는 두 가지 경우를 선택하였고, 수신기의 위치는 실내 공간의 중심선과 측면 벽을 따라 움직이며 수신 전력을 측정하였다. 각각의 송수신기 위치변화에 대하여 3GHz와 6GHz의 수신 전력을 측정하고 시뮬레이션 예측 결과와 비교하였다. 송신기의 위치 및 주파수 대역 변화에 따라 각 수신점에서 수신 전력의 변화를 분석하였다.

• 한국통신학회논문지
• /
• 제13권1호
• /
• pp.94-105
• /
• 1988

본 논문은 ISDN 실현 초기 단계에서 제공되는 서비스중 협대역 정보신호(2B+D)를 기존의 가입자 선로를 이용하여 전송할 때 요구되는 국내가입자 선로의 특성을 조사하고 전송선로 특성 조건에 관한 국제적인 동향과 비교, 분석하였으며, 그 결과를 분석하여 이를 모델링하였다. 그 결과 U-트랜시버의 수신레벨이 -31dBm 이하일 경우에는 기준품질 확보가 불가능하며, 측정회선의 3.6%는 협대역 ISDN 전송로로는 사용할 수 없는 것으로 나타났다. 선로잡음의 주요 형태는 임펄스성 잡음과 근단누화가 주류를 이루고 있으며 착오발생 형태는 버스트 모드보다 순간성이 강한 것으로 확인되었다. BER 측정결과 측정회선중 70% 이상의 회선이 품질기준을 충족시키는 구간은 2.5km이내로 관측되었다.

• Journal of Biosystems Engineering
• /
• 제28권3호
• /
• pp.239-244
• /
• 2003

The potential use of ultrasonic technique for firmness measurement of apples was evaluated. Mechanical properties(bioyield deformation, bioyield strength, rupture deformation, ultimate strength, and elastic modulus) and ultrasonic parameters (ultrasonic velocity, attenuation coefficient and the first peak frequency) of the apple flesh during the storage time were measured and analyzed. Ultrasonic parameters were determined from the measurement of ultrasonic wave transmission through the apple flesh specimen. Mechanical properties were obtained by universal testing machine. The bioyield strength, rupture strength, elastic modulus, ultrasonic velocity, and the first peak frequency of the apple flesh decreased with the storage time. The bioyield deformation, rupture deformation, and ultrasonic attenuation coefficient increased with the storage time. The correlation analysis between ultrasonic parameters and mechanical properties and the storage time was performed. The high correlations were found between the storage time and the ultrasonic parameters, and these relationships seem to be useful for determining the firmness of the apple flesh.

• 한국정보통신학회논문지
• /
• 제5권2호
• /
• pp.279-287
• /
• 2001

본 논문은 초고속 인터넷을 이용한 음성전송 방식인 VoIP(Voice over IP) 서비스에서의 음질의 주관적 평가에 관한 연구이다. PSNR이나 지터 갊은 멀티미디어 서비스의 객관적 파라미터는 명료히 정의되어 있고 쉽게 측정되나, 그것이 이용자의 지각적 인지도와는 일치하지 않는다. 본 연구에서는 송화자 내용 발생과정에 있어서 어느 정도 완전히 표현되었는가를 나타내는 송화 품질과 음성이 전송계를 통해 수화자에게 전달되는 과정에서 왜곡이나 잡음 등의 방해요인에 의해 열화 되는 정도를 나타내는 전송 품질, 그리고 수화자가 청각에서 신호처리 과정을 거친 송화자의 내용을 어느 정도 이해할 수 있는지를 나타내는 수화 품질에 대한 주관적 평가법과 그 척도를 제시한다. 또한 제안된 방법으로 실험하여 그 유효성을 검증한다.

• 한국태양에너지학회 논문집
• /
• 제31권6호
• /
• pp.72-77
• /
• 2011

The purpose for installation of offshore weather station is a measurement of wind resources and so on. If weather station is operated, it will be possible to analysis for wind resource and arrangement of wind farm by using measured data. In this paper, we carried out the development of offshore wind resource measurement system for measuring offshore wind resource. Also, In order to monitor for real-time wind data with 1 Hz, we installed the wireless transmission system. All wind characteristic data are sent to the server PC through the this system is connected outport of DataLogger. Transmitted wind data were used in order to look at in the Web-page and tablet PC on a real time basis in a graph. In this paper, we will introduce about the wind resource measurement and remote monitoring system that is the result of study.

• 한국구조물진단유지관리공학회 논문집
• /
• 제19권3호
• /
• pp.104-112
• /
• 2015

본 논문에서는 비접촉 표면파 측정을 이용하여 콘크리트 슬래브에 발생한 표면균열의 깊이를 측정하기 위한 비파괴 검사법을 연구하였다. 이를 위하여 표면파 측정, 해석 및 균열 깊이 평가의 과정을 포함한 새로운 측정모델을 제안하였다. 먼저, 3차원 유한요소해석 모델을 이용하여 표면파의 에너지와 콘크리트 균열의 깊이의 상관관계를 표현하는 표면파 전달함수를 구하였다. 제안된 측정모델은 실험을 통하여 증명하였다. 한 쌍의 비접촉 센서를 이용하여 깊이 0~100mm의 10개의 표면균열을 포함한 콘크리트 슬래브 ($1500{\times}1500{\times}180mm^3$)을 통과하여 전달되는 표면파를 측정하였다. 측정모델은 콘크리트 균열 깊이에 대하여 약 최대 10%의 오차를 보이며 실제 깊이를 예측하는 것으로 나타났다. 비접촉 표면파 측정을 통하여 얻은 결과는 기존의 TOFD에 바탕을 둔 초음파법에서 얻은 결과보다 향상된 정확도를 보이는 것으로 나타났다. 특히 비접촉 센서의 특성상 매우 향상된 측정 속도 및 측정값의 일관성을 얻을 수 있었다. 본 연구에서는 모델의 실제구조물에 적용성에 관한 토의를 포함하고 있다.

• Journal of Biosystems Engineering
• /
• 제29권5호
• /
• pp.407-418
• /
• 2004

There are several different types of continuously variable transmission(CVT) such as toroidal drive, belt drive, hydrostatic drive, hydro-mechanical drive. The toroidal CVT is an alternative to the manual transmission, HST, power-shift gear trans-missions or other CVTs. The driver of the CVT tractor doesn't have to operate a shia lever since the CVT controller automatically controls the speed of tractor. Thus, it is much easier to operate the CVT tractor. The fuel efficiency of CVT tractor can be increased since the controller responds quickly to the change in external load on the wheel during field operation. This study was conducted to develop the hardwares and softwares for the toroidal CVT controller which control the variator and the range clutches. The hardware consisted of a measurement system, hydraulic system and computer. And the PID controller was developed using the simulation model of the CVT control system. Through the simulation, the control coefficients for the PID controller were selected. Finally, the performance of the CVT control system was evaluated by step response test and torque response test. The settling time of the CVT control system appeared to be fast enough for field operations.

• Journal of Electrical Engineering and Technology
• /
• 제6권1호
• /
• pp.1-7
• /
• 2011

This paper proposes an enhanced noise robust algorithm for fault location on double-circuit transmission line for the case of single line-to-ground (SLG) fault, which uses distributed parameter line model that also considers the mutual coupling effect. The proposed algorithm requires the voltages and currents from single-terminal data only and does not require adjacent circuit current data. The fault distance can be simply determined by solving a second-order polynomial equation, which is achieved directly through the analysis of the circuit. The algorithm, which employs the faulted phase network and zero-sequence network with source impedance involved, effectively eliminates the effect of load flow and fault resistance on the accuracy of fault location. The proposed algorithm is tested using MATLAB/Simulink under different fault locations and shows high accuracy. The uncertainty of source impedance and the measurement errors are also included in the simulation and shows that the algorithm has high robustness.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1549-1554
• /
• 2000

HDD structure is excited by the dynamic motion of disk-spindle motor components. Those excitations which are generated at stator and magnet rotor, at bearings and from disk dynamics, are transmitted through motor spindle and flange to HDD cover and base. The operational deflection shape measurement can show the structural excitation patterns at the most influent frequency on the acoustic noise level. One of those components is the axial excitation along spindle, and the other is the local orbital excitation at contact area of motor flange and base. To make a reduction of those structural transmission excitations, the structure of spindle motor is modified to the direction of reinforcement at transmission path without change of bearings, magnet and coil. Some excitation of spindle motor component carrying out essential function is unavoidable. So it is the efficient way of HDD noise improvement to control the structural transmission of excitation.

• 분석과학
• /
• 제37권2호
• /
• pp.114-122
• /
• 2024

A transmission Raman spectroscopy-based quantitative model, which can analyze the content of a drug product containing naproxen sodium as its active pharmaceutical ingredient (API), was developed. Compared with the existing analytical method, i.e., high-performance liquid chromatography (HPLC), Raman spectroscopy exhibits high test efficiency owing to its shorter sample pre-treatment and measurement time. Raman spectroscopy is environmentally friendly since samples can be tested rapidly via a nondestructive method without sample preparation using solvent. Through this analysis method, rapid on-site analysis was possible and it could prevent the production of defective tablets with potency problems. The developed method was applied to the assays of the naproxen sodium of coated tablets that were manufactured in commercial scale and the content of naproxen sodium was accurately predicted by Raman spectroscopy and compared with the reference analytical method such as HPLC. The method validation of the new approach was also performed. Further, the specificity, linearity, accuracy, precision, and robustness tests were conducted, and all the results were within the criteria. The standard error of cross-validation and standard error of prediction values were determined as 0.949 % and 0.724 %, respectively.