• Journal of IKEEE
• /
• v.24 no.4
• /
• pp.1104-1108
• /
• 2020

This paper propose a variable proportional resonant feedforward algorithm for reducing the speed ripple of a three-phase permanent magnet synchronous motor. In general, the torque ripples can be generated by electrical pulsation due to current measurement errors and dead time and mechanical pulsation because of rotor eccentricity and eccentric load. These torque pulsations can cause speed pulsations of the motor and degrade the operating performance of the motor drive system. Therefore, in this paper, the factors of the speed ripple is analyzed and an algorithm to reduce the speed ripple is proposed. The proposed algorithm applied a variable proportional resonant controller in order to reduce the specific operating frequency included in the speed pulsation, and utilized a feedforward compensation controller structure to perform the compensation operation. The proposed algorithm is verified through various experiments.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.6
• /
• pp.1323-1328
• /
• 2021

In this paper, we present a medical electric scooter sharing platform for the transportation vulnerable who are experiencing difficulties and inconveniences in moving. The proposed medical electric scooter sharing platform for the transportation vulnerable includes basic mobile rental, return, and functions that incorporate the IOT technology of the currently operating personal mobility sharing platform. The safety function has been strengthened. The medical electric scooter sharing platform for the transportation vulnerable stores driving data on the server in real time through GPS, and strengthens the alarm and call function in advance of an accident to enable rapid SOS processing. By making the quick contact and responding to the situation, people with disabilities can drive safely and comfortably.

• Journal of Korean Society of Rural Planning
• /
• v.27 no.4
• /
• pp.43-54
• /
• 2021

This study analysed changes in rural tourism between before and after COVID-19 using LDA topic analysis. In order to understand the changes in rural tourism, blog data including the keyword 'Gochang-gun travel' was used. As a result of LDA topic analysis with blog data retrieved, the study found nine topics in 2019 and 2020. 2019 and 2020 are, generally, consistent in topics, but the three topics related to rural experiential tourism that appeared in 2019 did not appear in 2020. In 2020, three new topics emerged: Beach vacations and campings. New travel activities of noncontact with other people(Untact tourism in Korean context) in the COVID-19 era, and The negative impacts on travel businesses and behaviours from COVID-19. Especially, the adverse effects of COVID-19 have made an enormous decline in rural experience tourism destinations and cancellation of local festivals. On the other hand, new tourism activities have emerged due to COVID-19. Those activities have included camping, drive-thru destinations, and cycling. Ecological and natural tourist sites such as Ungok Wetland, Seonunsan Mountain, Seonunsa Temple, and Gusipo Beach appeared. These tourist destinations have a quiet atmosphere and less density place noncontacting with other people when visiting. Also, because overseas travel has become difficult, long-term stay travel in rural areas has appeared. This study indicates that COVID-19 has less impacted rural tourism than other tourism destinations with these positive and negative impacts.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.4
• /
• pp.519-526
• /
• 2022

Basically, autonomous vehicles drive using road and traffic information collected by various sensors. However, it is known that there is a limitation to realizing fully autonomous driving with only such technologies and information. In recent, various efforts are being made to overcome the limitations of sensor-based autonomous driving, and efforts are also underway to utilize more specific and accurate road and traffic information, called local dynamic map (LDM). However, LDM-related data standards and specifications have not yet been sufficiently verified, and research on the spatiotemporal scope of LDM during autonomous driving is extremely limited. Based on this background, the purpose of this study is to identify these limitations through an analysis of previous LDM-related studies and to present a framework for calculating the spatiotemporal activation section of LDM-based road and traffic information.

• Journal of Drive and Control
• /
• v.19 no.4
• /
• pp.46-53
• /
• 2022

RIn this study, a test tractor that could measure various types of agricultural operational loads was developed, and its performance was verified. This tractor could be used to measure the load generated during agricultural work and convert the related data into a database. A test tractor was developed using an 80-kW-rated load tractor, and it could measure various types of field test data, such as engine torque and rpm, wheel torque, PTO(power take-off) torque, hexometer, IMU/INS sensor, steering angle sensor, hydraulic pressure, and flow sensor data. To verify the developed test tractor, a verification test using an agriculture rotavator was performed. The test conditions were L1, L2, and L3 based on the tractor's main and sub-transmission stages, and stages 1 and 2 were selected as the PTO. In a comparison of the analyzed test data, similar tendencies in the test results of this research and other research (Kim's research) were seen. Through this, the developed test tractor was verified. In the future, we plan to conduct research on the tractor developed in this study using various attached working machines.

• Journal of Drive and Control
• /
• v.19 no.4
• /
• pp.54-61
• /
• 2022

This is a basic study analyzing emissions of an agricultural tractor during tillage operations. In this study, CO, THC, NOx, and PM considered as emission factor were analyzed during plow and rotary tillage operation by the tractor. Engine torque and rotational speed were measured through ECU. Engine power was calculated using engine torque and rotational speed. The emissions was calculated based on the number of units, rated power, load factor, and operating time. Results showed that the load factor was calculated almost twice, which was higher than 0.48. It was also observed that the emission of the tractor was variable for different agricultural operations because tractor loads were different based on operations. There was a difference in emissions due to differences in plow and rotary working hours. To estimate the emission of agricultural tractor based field operations in detail, it is necessary to consider TAF (Transient Adjustment Factor) and DFA (Deterioration factor). In the future, TAF and DFA will be considered to estimate emissions of the agricultural tractor. Finally, results of this study can contribute to the literature to estimate tractor emissions accurately.

• Journal of the Society of Naval Architects of Korea
• /
• v.58 no.6
• /
• pp.391-399
• /
• 2021

In order to investigate force and cavitation characteristics for the flat & twisted rudders in the Large Cavitation Tunnel (LCT), the rudder dynamometer was designed and manufactured. The measuring capacities of lift, drag and moment are ±1000 N, ±2000 N, and ±150 N-m, respectively. The present dynamometer uses the actuator with a harmonic drive to control the rudder angle without backlash. As the target ship is a military ship with twin shaft, each dynamometer was installed above the port & starboard rudders. After the installation of the model ship with all appendages, the model test composed of rudder force measurement and cavitation observation was conducted for the existing flat rudder & the designed twisted rudder. While the flat rudder showed the big difference of lift & moment between port & starboard, the twisted rudder presented a similar trend. The cavitation of the twisted rudder showed better characteristics than that of the flat rudder. Another set of model tests were conducted to investigate rudder performance by the change of the design propeller. There was little difference in rudder performance for the design propellers with slight geometric change. Through the model test, the characteristics of the flat & twisted rudders were grasped. On the basis of the present study, it is thought that the rudder with better performance would be developed.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.5
• /
• pp.959-968
• /
• 2022

In this paper, we intend to develop a cart with the convenience of moving objects or items that are difficult to hold by the hand of the disabled and the elderly from outdoor activities to a moving location. Using GPS module, DC motor, Bluetooth module, magnetometer sensor, and Blynk application, the smart follow cart was programmed to accurately know the owner's location while following the cart. The values of latitude and longitude of the magnetometer sensor are set so that the correct leverage value can be obtained in the lead for fine adjustment of the start and stop angles so that the user's position can be freely detected. The above motor driver L298n was connected to the motor to drive the DC motor at a fine angle. A smart follow cart was implemented that receives location signals according to the direction of the owner by turning on/off the mobile phone app as a switching role by connecting the GPS through Bluetooth wireless communication using a smartphone.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.3
• /
• pp.183-189
• /
• 2022

COVID-19 is also influencing the coffee industry. This will increase untact consumption, a new consumption trend. Consumption utilizing online channels and delivery service applications that represent untact consumption is becoming commonplace. The coffee industry is also increasingly using coffee shops with drive-through and smart ordering systems that can be ordered with minimal contact. While most of the untact services are preempted at franchise stores, many independent coffee shops still offer differentiated services by communicating directly with customers. However, along with the prolonged COVID-19 infection, coffee shops in the present era, which cannot be free from infectious diseases, have no choice but to worry about delivery services. Therefore, this study analyzed the factors that influence coffee delivery services. Research results due to the influence of COVID-19, regular delivery services have increased along with coffee delivery services. Regular delivery services will play a central role in coffee delivery services due to increased use of home cafes by consumers who want to enjoy coffee in various ways.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.6_3
• /
• pp.1239-1246
• /
• 2022

This paper introduces the effect of grease on the degradation characteristics of bearings used as key components of packaging equipment and automation systems. Bearings parts are installed to fix and support the rotating body of the system, and performance degradation of the bearings has a great effect on the life of the system too. When bearings are used in various devices and systems, the grease is applied to reduce friction and improve fatigue life. Determining the type of lubricant (grease) is important because it has a great influence on the operating environment and lifespan and ensures long lifespan of systems and facilities. However, studies that simultaneously compared and analyzed the change in mechanical degradation characteristics and the comparison of chemical degradation characteristics according to grease types under actual operating conditions are insufficient. In this paper, three types of small harmonic drive, high-load reducer, and low-load reducer grease used in power transmission joint modules are experimentally selected and finally injected into ball bearings with a load (19,500N) to improve bearing durability. Degradation characteristics were tested by attaching to test equipment. At this time, after the durability test under the same load conditions, the mechanical degradation characteristics, that is temperature, vibration according to the three greases types. In addition, the chemical degradation characteristics of the corresponding grease was compared to present the results of mutual correlation analysis.