• Title/Summary/Keyword: Threshold zone

검색결과 102건 처리시간 0.026초

무선네트워크에서 존 마스터 기반의 링크 안정성 해석 (Analysis of Link Stability Based on Zone Master for Wireless Networks)

  • 문정수;김정호
    • 정보처리학회논문지:컴퓨터 및 통신 시스템
    • /
    • 제8권3호
    • /
    • pp.73-78
    • /
    • 2019
  • 무선 네트워크에서 토폴로지의 빈번한 변화로 노드 간 링크 단절과 경로재설정이 발생하여 네트워크 내에 제어메시지 과부하와 같은 문제점들이 발생한다. 본 연구에서는 링크 단절과 제어 메시지 과부하와 같은 문제점을 해결하기 위하여 무선 네트워크 환경에서 주변 노드 탐색과정, 경로 탐색과정, 경로 관리과정의 3단계로 경로 설정을 수행하고 경로 관리 과정에서 존 마스터가 수집한 라우팅 테이블의 정보를 이용하여 링크 안정성 값을 산출한다. 그리고 산출 된 링크 값을 존 마스터가 모니터링 하여 임계 값 이하로 되면 링크 단절로 예측하고 해당 송수신 노드에게 경로 재설정을 수행하게 된다. 제안한 기법은 이동 노드 수 변화에 따른 데이터 처리량, 평균 경로 설정 시간 및 이동 노드의 속도 변화에 따른 데이터 처리량에서 기존의 OLSR 프로토콜보다 성능 향상을 나타내었다.

Self-Drop을 이용한 드론의 비행 금지구역 진입 제한에 관한 연구 (A Study on Restrictions on Entry of Drones into No-Flight Zones using Self-Drop)

  • 김장원
    • 한국정보전자통신기술학회논문지
    • /
    • 제15권6호
    • /
    • pp.457-462
    • /
    • 2022
  • 최근 드론을 엔터테인먼트 도구로 이용하는 문화생활이 다양하게 만들어지고 있고, 이를 실현하기 위해 비행 금지 구역을 침범할 정도로 성능이 좋은 드론을 이용하는 사용자가 많아지고 있다. 만족도가 높은 엔터테인먼트 활동을 위한 드론은 체공 시간도 길어야 하고 장거리 비행도 가능해야 하는데, 이것이 종종 비행 금지구역을 침범하거나 또는 원하지 않는 비행 충돌 문제가 발생하여 큰 피해가 날 수 있다. 본 연구에서는 이러한 문제를 해결하기 위하여 GCS(Ground Control System)로 비행 금지구역을 설정하고, 임계속도 10km/h 이하로 비행할 경우 비행 금지구역으로부터 10m 떨어진 임계거리 안으로 들어오지 않게 하여 안전하게 드론을 조종하게 하고, 임계속도 이상으로 비행해서 임계거리 안으로 진입할 경우 드론이 GCS 제어에 의해 self-drop 하도록 하여 비행 금지구역 안으로 들가지 못하도록 하는 방법을 제안하였다. 제안한 방법으로 특정 실험 지역에서 총 44번의 반복실험을 한 결과 한두번 제한구역을 넘어간 경우를 제외하고는 드론이 안전하게 self-drop한 결과를 얻었으며 제안한 방법으로 드론을 제어할 경우 비행 금지구역으로 넘어가는 것을 막을 수 있는 적절한 방법임을 확인할 수 있었다.

Micromachining of Cr Thin Film and Glass Using an Ultrashort Pulsed Laser

  • Choi, Ji-Yeon;Kim, Jae-Gu;Shin, Bo-Sung;Whang, Kyung-Hyun
    • Journal of the Optical Society of Korea
    • /
    • 제7권3호
    • /
    • pp.160-164
    • /
    • 2003
  • Materials processing by ultrashort pulsed laser is actively being applied to micromachining technology due to its advantages with regard to non-thermal machining. In this study, materials processing with ultrashort pulses was studied by using the high repetition rate of a 800 nm Ti:sapphire regenerative amplifier. This revealed that the highly precise micromachining of metallic thin film and bulk glass with a minimal heat affected zone (HAZ) could be obtained by using near damage threshold energy. Grooves with diffraction limited sub-micrometer width were obtained with widths of 620 nm on Cr thin film and 800 nm on a soda-lime glass substrate. The machined patterns were investigated through SEM images. We also phenomenologically examined the influence of variations of parameters and proposed the optimal process conditions for microfabrication.

Algorithms to measure carbonation depth in concrete structures sprayed with a phenolphthalein solution

  • Ruiz, Christian C.;Caballero, Jose L.;Martinez, Juan H.;Aperador, Willian A.
    • Advances in concrete construction
    • /
    • 제9권3호
    • /
    • pp.257-265
    • /
    • 2020
  • Many failures of concrete structures are related to steel corrosion. For this reason, it is important to recognize how the carbonation can affect the durability of reinforced concrete structures. The repeatability of the carbonation depth measure in a specimen of concrete sprayed with a phenolphthalein solution is consistently low whereby it is necessary to have an impartial method to measure the carbonation depth. This study presents two automatic algorithms to detect the non-carbonated zone in concrete specimens. The first algorithm is based solely on digital processing image (DPI), mainly morphological and threshold techniques. The second algorithm is based on artificial intelligence, more specifically on an array of Kohonen networks, but also using some DPI techniques to refine the results. Moreover, another algorithm was developed with the purpose of measure the carbonation depth from the image obtained previously.

도로조명의 빛공해 계산 및 규제안 제안 (Calculation and Regulation Proposal of Light Pollution from Road Lightings)

  • 조숙현;이민욱;최현석;김훈
    • 조명전기설비학회논문지
    • /
    • 제25권12호
    • /
    • pp.21-26
    • /
    • 2011
  • This is a study to establish regulations against light pollution for lighting on roads. Many kinds of light pollution by luminaire on roads was calculated and analyzed by applying the classification method of luminaires(Cut-off classification of IDA-IESNA, BUG Rating Classification) and the calculation method of Upward Lighting Ratio of CIE among measures to prevent light pollution that international lighting organizations suggest. As a result of the analysis, it was found that the regulation by Cutoff of IESNA and ULR classification of CIE could be one for scattered light of light pollution compared to BUG classification but is not sufficient for the regulation of light tresspass or glare. BUG classification by each lighting zone was suggested as threshold value of the light pollution regulation considering domestic conditions.

P-I 곡선을 이용한 충격압력하중을 받는 철근 콘크리트 보의 손상해석 (Damage Analysis of RC Beams Subjected to Blast Load Using P-I Diagram)

  • 조정희;남진원;김호진;최형진;송하원;변근주
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
    • /
    • pp.438-441
    • /
    • 2006
  • Since the behavior of structural members subjected to blast load shows different responses, the effect of impulse as well as peak load should be considered in the damage analysis. The threshold on P-I diagram that causes specific damage level divides the diagram into the failure zone and the non-failure zones. In this study, numerical analysis is performed based on single-degree-of-freedom (SDOF) techniques to generate rational P-I diagram considering material non-linearity and dual failure modes (flexure and direct shear) of RC beams. From the comparison with existing test results it is concluded that proposed numerical method is good to derive failure mode of RC beam under blast load.

  • PDF

Model-based fault diagnosis methodology using neural network and its application

  • Lee, In-Soo;Kim, Kwang-Tae;Cho, Won-Chul;Kim, Jung-Teak;Kim, Kyung-Youn;Lee, Yoon-Joon
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2001년도 ICCAS
    • /
    • pp.127.1-127
    • /
    • 2001
  • In this paper we propose an input/output model based fault diagnosis method to detect and isolate single faults in the robot arm control system. The proposed algorithm is functionally composed of three main parts-parameter estimation, fault detection, and isolation, When a change in the system occurs, the errors between the system output and the estimated output cross a predetermined threshold, and once a fault in the system is detected, and in this zone the estimated parameters are transferred to the fault classifier by ART2(adaptive resonance theory 2) neural network for fault isolation. Since ART2 neural network is an unsupervised neural network fault classifier does not require the knowledge of all possible faults to isolate the faults occurred in the system. Simulations are carried out to evaluate the performance of the proposed ...

  • PDF

준설토의 침강형태에 관한 연구 (Settling Mode of the Dredged Soil)

  • 윤상묵;장병욱;차경섭
    • 한국농공학회지
    • /
    • 제45권1호
    • /
    • pp.63-73
    • /
    • 2003
  • The settling of the dredged soil may vary with mineral composition, grain size distribution, initial water content and salt concentration of suspension of the site. A series of settling column test was performed to investigate the behaviour of solid suspension material from dredging and reclamation. Settling mode was divided into four types from the observation of interface and settling curves of clay minerals and marine clay samples, and the relationship charts of salt concentration and the initial water content were established to use in the dredging operation with any salt concentration. The critical initial water content which was defined as a threshold of zone settling and the consolidation settling was varied with salt concentration of water and was proportional to the plasticity of soil in sea water.

MPE-LPC를 이용한 심전도 신호의 압축 (Compression of Electrocardiogram Using MPE-LPC)

  • 이태진;김원기;차일환;윤대희
    • 전자공학회논문지B
    • /
    • 제28B권11호
    • /
    • pp.866-875
    • /
    • 1991
  • In this paper, multi pulse excited-linear predictive coding (MPE-LPC), where the correlation eliminated residual signal is modeled by a few pules, is shown to be effective for the compression of electrocardiogram (ECG) data, and a more efficient scheme for a faithful reconstruction of ECG is proposed. The reconstruction charateristic of QRS's and P.T waves is improved using the adaptive pulse allocation (APA), and the compression ratio (CR) can be changed by controlling the mumber of modeling pulses. The performance of the proposed method was evaluated using 10 normal and 10 abnormal ECG data. The proposed method had a better performance than the variable threshold amplitude zone time epoch coding (AZTEC) algorithm and the scan-along polygonal approximation (SAPA) algorithm with the same CR. With the CR in kthe range of 8:1 to 14:1, we could compress ECG data efficiently.

  • PDF

수종 상록식물의 월동 중 수분상태 (Water Status of Several Evergreen Plants during Overwintering)

  • Kim, Joon-Ho;Chang-Seok Lee
    • The Korean Journal of Ecology
    • /
    • 제9권4호
    • /
    • pp.201-208
    • /
    • 1986
  • The water status of the leaves of several evergreen plants was investigated in order to discuss the geopgraphical distribution of them. Relastionship between relative water content and water potential of the leaves showed linear decrease for evergreen conifers but exponential decrease for Korean box tree (Buxus microphylla var. koreana). On the basis of the leaf water potential, the water status of the conifers during wintering was distinctly divided into three periods; hardening, cold resistance and dehardening, but lacking in those periods for the Korean box tree, where the status continously decreased. In the cold resistance the leaf water potentials were -23 bar for both spruce (Picea jezoensis) and yew (Taxus cuspidata). From these results and threshold temperature at beginning of hardening, distribution of the conifers was explained that in order of the red pine, the Korean white pine, the yew and the spruce the distribution could be extended at higher altitudes and in more northward areas, whereas the distribution of the Korean box tree was restricted to the lowland of temperate zone.

  • PDF