• Journal of Preventive Medicine and Public Health
• /
• 제22권4호
• /
• pp.474-479
• /
• 1989

This research was conducted to evaluate the effect of improvement in work environment and of segregation in a fluorescent lamp manufacturing factory. Among the total of 80 workers, 8 workers whose mercury concentration in urine reached a hazardous level ($200-299{\mu}g/l$) were moved to mercury free workplace. The follow-up examination for their mercury concentration in urine was done three times ; on May 3, 1988, September 1, 1988 and April 3, 1989. The results were as follows : 1. Mercury concentration in the air was reduced from 0.140 to 0.107 $mg/m^3$ in 4 months, and to $0.087mg/m^3$ in one year after environmental improvement in workplace. However the level still exceeded the Threshold Limit Value. 2. The geometric mean of urinary mercury concentration among 80 workers was $173.0{\mu}g/l\;(5.1{\sim}458.6{\mu}g/l$). The distribution of workers according to urinary mercury concentration showed that 9 workers (11.2%) were above the mercury poisoning level ($300{\mu}g/l$), 24 workers (30.0%) were $200-299{\mu}g/l$, 35 workers (43.8%) were $50-199{\mu}g/l$, and 12 workers (15.0%) were below 50 ${\mu}g/l$. 3. Among the 24 workers whose urinary mercury concentration was 200-299 $50-199{\mu}g/l$, 8 were able to be followed up. Their mean urinary mercury concentration before segregation was $244.9{\mu}g/l$, but decreased to $151.4{\mu}g/l$ in four months, $128.8{\mu}g/l$ in six months, and $46.8{\mu}g/l$ in one year after segregation.

• Nuclear Engineering and Technology
• /
• 제49권4호
• /
• pp.663-667
• /
• 2017

Delayed hydride cracking (DHC) was first observed in pressure tubes in Canadian CANDU reactors. In light water reactors, DHC was not observed until the late 1990s in high-burnup boiling water reactor (BWR) fuel cladding. In recent years, the focus on DHC has resurfaced in light of the increased interest in the cladding integrity during interim conditions. In principle, all spent fuel in the wet pools has sufficient hydrogen content for DHC to operate below $300^{\circ}C$. It is therefore of importance to establish the critical parameters for DHC to operate. This work studies the threshold stress intensity factor ($K_{IH}$) to initiate DHC as a function of temperature in Zry-4 for temperatures between $227^{\circ}C$ and $315^{\circ}C$. The experimental technique used in this study was the pin-loading testing technique. To determine the $K_{IH}$, an unloading method was used where the load was successively reduced in a stepwise manner until no cracking was observed during 24 hours. The results showed that there was moderate temperature behavior at lower temperatures. Around $300^{\circ}C$, there was a sharp increase in $K_{IH}$ indicating the upper temperature limit for DHC. The value for $K_{IH}$ at $227^{\circ}C$ was determined to be $2.6{\pm}0.3MPa$ ${\surd}$m.

• 한국해양공학회지
• /
• 제35권5호
• /
• pp.327-335
• /
• 2021

Microcracks can rapidly grow and develop in high-strength steels used in offshore structures. It is important to render these microcracks harmless to ensure the safety and reliability of offshore structures. Here, the dependence of the aspect ratio (As) of the maximum depth of harmless crack (a_hlm) was evaluated under three different conditions considering the threshold stress intensity factor (Δk_th) and residual stress of offshore structural steel F690. The threshold stress intensity factor and fatigue limit of fatigue crack propagation, dependent on crack dimensions, were evaluated using Ando's equation, which considers the plastic behavior of fatigue and the stress ratio. a_hlm by peening was analyzed using the relationship between Δk_th obtained by Ando's equation and Δk_th obtained by the sum of applied stress and residual stress. The plate specimen had a width 2W = 12 mm and thickness t = 20 mm, and four value of As were considered: 1.0, 0.6, 0.3, and 0.1. The a_hlm was larger as the compressive residual stress distribution increased. Additionally, an increase in the values of As and Δk_th(l) led to a larger a_hlm. With a safety factor (N) of 2.0, the long-term safety and reliability of structures constructed using F690 can be secured with needle peening. It is necessary to apply a more sensitive non-destructive inspection technique as a non-destructive inspection method for crack detection could not be used to observe fatigue cracks that reduced the fatigue limit of smooth specimens by 50% in the three types of residual stresses considered. The usefulness of non-destructive inspection and non-damaging techniques was reviewed based on the relationship between a_hlm, a_NDI (minimum crack depth detectable in non-destructive inspection), a_{cr N} (crack depth that reduces the fatigue limit to 1/N), and As.

• Safety and Health at Work
• /
• 제3권2호
• /
• pp.130-139
• /
• 2012

Objectives: The purpose of this study is to evaluate the tire manufacturing work environments extensively and to identify workers' exposure to hazardous substances in various work processes. Methods: Personal air sampling was conducted to measure polycyclic aromatic hydrocarbons, carbon disulfide, 1,3-butadiene, styrene, methyl isobutyl ketone, methylcyclohexane, formaldehyde, sulfur dioxide, and rubber fume in tire manufacturing plants using the National Institute for Occupational Safety Health Manual of Analytical Methods. Noise, carbon monoxide, and heat stress exposure were evaluated using direct reading instruments. Past concentrations of rubber fume were assessed using regression analysis of total particulate data from 2003 to 2007, after identifying the correlation between the concentration of total particulate and rubber fume. Results: Workers were exposed to rubber fume that exceeded 0.6 mg/$m^3$, the maximum exposure limit of the UK, in curing and production management processes. Forty-seven percent of workers were exposed to noise levels exceeding 85 dBA. Workers in the production management process were exposed to $28.1^{\circ}C$ (wet bulb globe temperature value, WBGT value) even when the outdoor atmosphere was $2.7^{\circ}C$ (WBGT value). Exposures to other substances were below the limit of detection or under a tenth of the threshold limit values given by the American Conference of Governmental Industrial Hygienists. Conclusion: To better classify exposure groups and to improve work environments, examining closely at rubber fume components and temperature as risk indicators in tire manufacturing is recommended.

• 한국산업보건학회지
• /
• 제27권4호
• /
• pp.390-397
• /
• 2017

Objectives: The purpose of this study was to evaluate concentrations in airborne total and respirable dusts in the cement manufacturing and handling industries. Methods: Fifty-three total dust and 42 respirable dustsamples were collected from 24 work places. Total dust samples were collected using a three-stage cassette. Respirable dust samples were collected using a cyclone equipped with a 37 mm, $5{\mu}m$ pore size PVC filter. Results: The geometric means of the dust concentrations were $0.10mg/m^3$ and $0.08mg/m^3$ in total dust and respirable dust, respectively. The Korean Occupational Exposure Limit($10mg/m^3$) was not exceeded, but the rate of exceeding the American Conference of Governmental Industrial Hygienist(ACGIH) Threshold Limit Value($1mg/m^3$) was 16.7%. Conclusion: When measuring the level of dust at cement manufacturers, the airborne concentration of respirable dust should be evaluated. In order to protect the health of workers exposed to cement dust, it is necessary to actively consider strengthening the Korean Occupational Exposure Limit.

• ETRI Journal
• /
• 제33권4호
• /
• pp.652-655
• /
• 2011

In this letter, we propose a new compression method for a high dimensional support vector machine (SVM). We used singular value decomposition (SVD) to compress the norm part of a radial basis function SVM. By deleting the least significant vectors that are extracted from the decomposition, we can compress each vector with minimized energy loss. We select the compressed vector dimension according to the predefined threshold which can limit the energy loss to design criteria. We verified the proposed vector compressed SVM (VCSVM) for conventional datasets. Experimental results show that VCSVM can reduce computational complexity and memory by more than 40% without reduction in accuracy when classifying a 20,958 dimension dataset.

• 한국전자파학회논문지
• /
• 제23권7호
• /
• pp.791-796
• /
• 2012

RF 리미터(limiter)는 원하지 않는 신호로부터 수신단을 보호하기 위해 사용되는 소자로서, 임계값 이상의 모든 입력신호에 대해 일정한 출력을 제공한다. 다이오드를 사용하는 RF 리미터는 작은 신호는 통과시키는 반면, 어떤 임계값 이상의 신호는 감쇄시켜서 전달한다. 현대의 레이더 시스템에서 수신기를 보호하기 위해 사용되는 RF 리미터는 새로운 간섭 위협이나 복잡한 전자파 환경의 도전으로부터 극복할 수 있는 절대 필요한 역할을 수행한다. 본 논문은 고출력 RF 리미터를 구현하기 위해 PIN 다이오드와 Limit 다이오드의 조합으로 구성된 회로를 제안한다. PIN 다이오드는 스위치의 격리도(isolation) 특성을 이용하는 것과 같이 다이오드의 격리도 특성을 이용하는 개념을 적용한다. S-대역에서 200 us 펄스폭을 갖는 2 kW RF 리미터를 개발하였다. 그 측정 결과는 예측한 값과 잘 일치함을 알 수 있다.

• 한국농공학회논문집
• /
• 제57권6호
• /
• pp.35-46
• /
• 2015

Improvement in domestic poultry production has a positive effect on the export competitiveness of the poultry industry. However, overproduction and enlargement of facilities to assure a supply increase a stocking density which make a poor environment in the broiler house. In particular, an intensive rearing environment is vulnerable to dust control that causes respiratory diseases, such as asthma, bronchitis, etc., to farmers and broilers. However, monitoring data and research for environment control are not adequate, and there are no air quality regulations in broiler houses in Korea. In this study, TSP, PM10, inhalable dust and respirable dust concentration were monitored according to season, age of broiler and broiler's activities. Air quality assessment was also performed in accordance with the threshold limit value by Donham et al. (2000). The TSP concentrations were 77.5 %, 219.7 % higher and PM10 concentrations were 121.2 %, 303.8 % higher when change of season and winter respectively than summer. There were significantly different concentrations according to season and age of broiler. Inhalable and respirable dust concentration were also clearly different according to the season and age of broiler. A high dust concentration was observed, specifically exceeding the threshold limit by 119 % in the winter. In the case of the broiler's motion was activity according to worker's access into the broiler house, concentration level was 769.6 % higher than broiler's motion was stable and exceeded the threshold limit. These results suggest that the worker should put on protective equipment to protect there's respiratory health in the broiler house.

• 한국안전학회지
• /
• 제35권2호
• /
• pp.111-117
• /
• 2020

When KS C IEC 60069-10-1(2015) standard is applied to estimate a hazardous area, the chart showing the relationship between a hazardous area distance and release characteristic is used as a guide to determine the extent of hazardous zones for various forms of release. Three release characteristic lines based on the three types of release as an unimpeded jet release with high velocity, a diffusive jet release with low velocity, and a release of heavy gases or vapours that spread along horizontal surfaces are given. As these characteristic lines have the low limit threshold, it is difficult to estimate the hazardous area distance when the value of release characteristic is under the low limit threshold. And KS C IEC 60079-10-1(2015) standard shows the concept for a zone of Negligible extent(NE) which can be considered as non hazardous area, but it is also difficult to apply the concept of a Negligible extent. The purpose of this paper is to suggest the guideline for the release characteristic to decide a hazardous area distance and the Negligible extent(NE) being considered as non-hazardous area when deciding a hazardous area distances by the KS C IEC 60079-10-1 standard.

• 한국항만경제학회지
• /
• 제34권4호
• /
• pp.181-190
• /
• 2018

본 연구는 2012년 1월부터 2018년 5월까지의 주별 건화물선 운임과 원자재 가격 자료를 사용하여 두 변수간의 비대칭적인 관계를 다음의 두 가지를 중심으로 실증 분석한다. 첫째, 원자재가격의 거시경제지표에 대한 비대칭성을 2단계 경계(threshold) 공적분 검정모형으로 추정한다. 둘째, 기존의 원자재가격 변화의 무역수지에 대한 비대칭관계 검정을 보다 고빈도 건화물선 운임지수로 우회해서 검정한다. 추정결과 기존의 선형 분석과 대조적으로 하한과 상한에 대한 각각의 경계값이 상이한 비대칭성을 갖는 것으로 드러났다. 이는 불규칙적인 수익률 변동을 유발하는 급격한 잔차의 변동 구간이 원자재 가격과 건화물선 운임간의 선형의 장기균형관계가 성립하지 않도록 함을 의미한다. 따라서 이상의 추정결과는 급격한 가격 변화를 분석에 고려하기 위해서는 불규칙(irregular)적인 변동성을 제어하는 무반응(band of inaction)구간을 모형에 포함하는 것이 필요함을 의미하며 기존의 원자재가격의 무역수지에 대한 비대칭성과 일치하는 실증분석 결과다.