• 한국기계가공학회지
• /
• 제11권4호
• /
• pp.160-167
• /
• 2012

This paper is concerned with a particular fracture mechanics parameter ${\Delta}K_{th}$, known as the 'threshold stress intensity range', or 'fatigue threshold'. This threshold ${\Delta}K_{th}$ constitutes, as it were, a hinge between the notion of crack initiation and the notion of crack growth. It has often been thought that, like the endurance limit, it could be an intrinsic criterion of the material. The study was conducted on a SA-508 pressure vessel steel used in the nuclear power industry. This material exhibits a typical threshold effect in the range of the crack growth rates which were determined; that is, below approximately $da/dN=10^{-6}mm/cycle$, the slope of the da./dN versus ${\Delta}K$ curve is almost vertical. The value of ${\Delta}K_{th}$ was determined at a growth rate of $10^{-7}$ mm/cycle according to the ASTM Standard for threshold testing. The fatigue threshold values are in the range 21 $kg/mm^{3/2}$ to 12 $kg/mm^{3/2}$ depending on the stress ratio effect.

• Journal of Welding and Joining
• /
• 제5권2호
• /
• pp.35-43
• /
• 1987

The effect of post weld heat treatment (P.W.H.T) on the propagation rate of stress corrosion cracking(S.C.C) and threshold stress intensity factor ($K_{IC}.c.c$) for stress corrosion cracking of 304 stainless steel has been investigated in boiling 45% $MgCl_2$ solutions with W.O.L specimens. Specimens were precracked by turning a pair of Cr-Mo steel bolts into a machined slot at the end of the specimen. The fracture surface was examined fractographically by Scanning Electron Microscope(S.E.M.)

• 열처리공학회지
• /
• 제16권6호
• /
• pp.315-319
• /
• 2003

Effect of nitriding on fatigue crack initiation and growth rate has been studied in Ni-Cr-Mo steel. Specimens were nitrided at $860^{\circ}C$ for 15 hr. The fatigue limit of nitrided specimens were superior to those ofannea1ed($860^{\circ}C$, 15 hr) specimens. Based on detailed observations of slip band and micro crack initiation, it is concluded that the excellent fatigue limit of nitrided specimens is attributed to improved slip initiation resistance by nitriding. The characteristic of fatigue crack growth rate of nitrided specimens was investigated by comparing with those of annealed specimens. It was found that the crack growth rate was markedly decreased and the threshold stress intensity factor range was improved by nitriding. It is concluded that the excellent fatigue limit of nitrided specimens is also attributed to improved fatigue crack growth rate and threshold stress intensity factor range by nitriding.

• 대한기계학회논문집
• /
• 제14권5호
• /
• pp.1181-1185
• /
• 1990

본 연구에서는 정적파괴는 피로균열 진전의 최종과정에서 생기는 경우가 많다. 따라서 정적파괴의 경우의 파괴평가선도 및 피로파괴의 경우의 파괴평가선도가 얻어지 면 실제의 사용에 대해서 대단히 유용하다. 이와같은 관점에서 피로파괴에 대한 파 괴평가선도와 데이터베이스(data base)의 구축을 검토해 보고자 한다.

• 산업기술연구
• /
• 제23권A호
• /
• pp.3-7
• /
• 2003

Effect of nitriding on fatigue crack initiation and growth rate has been studied on SNCM. Specimens were nitrided for 15 hr at $860^{\circ}C$. The fatigue limit of nitrided specimens was superior to that of annealed($860^{\circ}C$, 15 hr) specimens. Based on detailed observations of slip band and micro crack initiation, it is concluded that the excellent fatigue limit of nitrided specimens is attributed to improved slip initiation resistance by nitriding. The characteristic of fatigue crack growth rate of nitrided specimens was investigated and compared with those of annealed specimens. It was found that by nitriding the crack growth rate was markedly decreased and the threshold stress intensity factor range was improved. It is concluded that the excellent fatigue limit of nitrided specimens is also attributed to improved fatigue crack growth rate and threshold stress intensity factor range by nitriding.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2019년도 춘계학술논문요약집
• /
• pp.74-75
• /
• 2019

• 대한기계학회논문집
• /
• 제12권2호
• /
• pp.271-277
• /
• 1988

본 연구에서는 항공기, 압력용기 및 지상운송차량 등에 고강도와 용접성이 요구되는 고강도 알류미늄합금 7017T651, 7020T651 및 5083 H115에 대해 균열진전 하한계특성 및 안정 균열진전 하한계특성에 미치는 영향을 고찰 하고자 한다.

• 대한기계학회논문집
• /
• 제8권2호
• /
• pp.141-144
• /
• 1984

본 연구에서는 완전 역 피로응력(completely reversed fatgue stress)를 받는 타원 노치에서 균열 발생과 전파에 대한 이론 임계 피로 한도를 응력 세기 계수 개념 을 도입하여 임의의 재질과 임으의 타원 노치 형상에 대해서 적용할 수 있도록 유도하 며 그 결과는 기존 이론보다 Frost의 실험치에 더 잘 일치함을 보이고자 한다.

• 한국환경과학회지
• /
• 제30권1호
• /
• pp.45-55
• /
• 2021

In this study, the odor of the parts and the odor of the surrounding environment were classified and verified. In order to increase the reliability of odor quantitative/qualitative analysis, the selection criteria for 5 sensory evaluators were established, and the n-Butanol control solution for each odor intensity was periodically trained to recognize the odor intensity before sensory evaluation. In addition, although various odor thresholds have been used through several studies, verification of whether the odor intensity value obtained through GC/MSD analysis is similar to the degree to which a person directly smells and feels it. It is important to select the odor threshold that has the best correlation with the odor intensity calculated by the person smelling the odor. Finally, sampling and measuring flowing airflow and temporary odors such as odor component analysis was experimentally difficult due to limited collection space and differences in concentration of generated components. In this study, a quantitative analysis was made possible by using the low temperature concentration (cooling) trap method. Through this, it was confirmed that the correlation with the actual odor intensity was not caused by the product itself, but by the environmental factor discharged from the product after creating the odor environment.

• Journal of Welding and Joining
• /
• 제13권2호
• /
• pp.96-105
• /
• 1995

본 연구에서는 종래의 미소피로균열 성장속도 해석방법에 대한 수정안을 제시하고 수정 후의 방 법에 의해서 계산한 값들과 S4SC 탄소강에 대한 Nisitani와 Goto의 실험결과를 비교하여 계산한 값과 실험데이터 사이에 양호한 일치가 있음을 보였다. 이미 제시된 피로균열성장속도 식에는 하한계수준과 피로한도를 연관시키는 재료상수와 탄소성 거동에 대한 수정 및 균열닫힘효과를 나타내는 방법이 포함되어 있다. 본 연구에서 행한 수정중의 하나는 기하학적인 상수대신에 퍼만(Forman)의 탄성응력 강도계수 범위식을 이용하는 것이고, 다른 하나는 균열이 성장함에 따라 편심형단면으로 되면서 모멘트에 기인해 발생되는 굽힘효과를 고려하는 것이다. 이 방 법을 수명예측에 사용하면 용접구조물은 물론 기계구조물의 보다 정확한 수명예측이 가능할 것 이다.