• Quality Improvement in Health Care
• /
• v.21 no.1
• /
• pp.80-95
• /
• 2015

Objectives : A safety culture is the bedrock for all patient safety improvement initiatives; thus, many resources have been invested in measuring hospital culture. However, many of these endeavors have failed to yield meaningful results. This article proposes a practical checklist to ensure successful administration of a safety culture survey and describes current methodologies for analyzing survey results to develop safety improvement programs. Methods : We reviewed currently used safety culture surveys and summarized their strengths and weaknesses. We also reviewed studies using safety culture surveys and found several pitfalls leading to failure in survey administration. With this information, we developed a checklist that covers critical items in the survey process. We also reviewed newly developed methodologies for survey results analysis and application and described them using the Korean version of the Safety Attitudes Questionnaire as an example. Results : The checklist consists of three steps: survey preparation, administration, and analysis and application. Each step contains clear action items. The content even describes how to get buy-in from hospital executives and manage communication channels with them. Also, common misunderstandings regarding survey scores are described and possible solutions are suggested. In the analysis section, we demonstrate new methods for obtaining more accurate survey results and how to utilize these methods to develop and implement hospital-wide safety improvement programs. Conclusion : A successful safety culture survey is the foundation of all future safety improvement projects. This review is intended to guide hospitals in enhancing safety.

• Journal of Korean Society of Rural Planning
• /
• v.9 no.1 s.18
• /
• pp.65-75
• /
• 2003

As a pre-step research to make land-use planning in the region level, this study aims to analyze some probability pattern representing transition probabilities from farmland to others using the sequential detailed digital land-use maps. Kinki and Chubu regions of Japan, which have Osaka and Nagoya cities as their center places respectively, were selected as test regions in this study. The 10m grid land-use maps for four time series at every 5 year from 1977 to 1992 were used. In this study, the regions were divided into three sub-areas 10km, 20km, and 30km according to distance from center cities, respectively. The correlation coefficient (CC) between sub-areas with same distance in the two regions was calculated to analyze whether or not the two regions have common points in the pattern of land-use conversion probability from farmland to other types. The probability distribution of the converted areas which were moved to the urbanized area (residential, commercial, industrial, road, park and public facility areas) was about $40{\sim}70%$ for both all periods and sub-areas. According to distance from city centers, the probability moved to the urbanized area was about 60% at 10km area, and 40% at the 30km area, which means that the values we decreased gradually, while in the case moved to the forest and the etc areas, the values were increased slightly. The CC analysis from the paddy field and the dry field to the others separately showed that there is high correlation in the probability pattern between the two regions.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.11
• /
• pp.138-147
• /
• 2001

Alignment systems are frequently used under various semiconductor manufacturing environment. Particularly in PDP(Plasma Display Panel) manufacturing process, the alignment system is applied to the combining and sealing processes of the upper and lower glass panels of PDP, where these processes are performed in the vacuum chamber of high vacuum and high temperature. In this paper, the XYΘ-alignment stage is developed to align PDP panels. Because of high vacuum and high temperature environment, the alignment chamber has been designed to isolate the inner part of the alignment chamber from the outer environment of high vacuum and high temperature, in which every part of the alignment stage is inserted. As it is difficult to attach feedback sensors to the alignment stage in the alignment chamber, the alignment stage is implemented with the open loop algorithm, where the parallel link structure has been designed using step-motors and ball-screws for structural simplicity. The kinematic analysis is performed to drive the parallel link structure, based on the experiments of actuation-compensation of the alignment stage. For the error compensation, the hyperpatch model has been used to model the errors. From the experiments, the positional accuracy of the alignment stage can be improved significantly.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.16 no.3 s.43
• /
• pp.233-242
• /
• 1992

This study primarily concentrates on the Fashion Style of the New Generation which has come into being in 1980 with reference to the contents of the newspaper and magazine in 1950's. . The New Generation has undergone the social and cultural change under the effect of mass communication, mass consumption brought by the economic development, sports boom promoted during the period of Asian Games and Seoul Olympic Games and the adoption of the policy for the autonomous school uniform. In the process of the social and cultural change, they have the common peculiarity such as sensitivity, anthoritarianism and polarity and they have taken an important part in the development of the 'Young Fashion' The characteristics of their fashion styles are divided into three periods as follows; 1. The rising period (1980-1982): The most important pecuriality of the first step can be sum up to the following point. The free fashion style replaced the formal one such as T-shirt or casual wear comes into as a everyday dress. Moreover, many people become interested in the New Fashion which is gradually diversified and high-qualified. As a natural consequence, the lively interest of the people has brought into the appearance and competition of the New Brand in fashion industry 2. The growing period (1983-1986): Mannish Look, so-called 'New Fashion' gained the summit of the fashion and change over conservatively. However, 'Mannish Look' have great effect on the Fashion Style until now on. Specially in Korea, 'Punk Style'and 'Androgynous Look' can be an example among many. 3. The diversifying period (1987-1989): The Fashion Style has developed variously even though the Reactionism takes the lead as the main current of the Korean Fashion. Moreover, it is noticeable that man comes into the stage as a new fashion group and the fashion market begins to dear in various lines of goods with moderate and low prices. These various aspects can be regarded as diversification in the Fashion Style as the needs in the times and society.

• Journal of Sensor Science and Technology
• /
• v.9 no.1
• /
• pp.9-14
• /
• 2000

Dielectric characteristics of P(VDF/TrFE) film manufactured using spin coating technique have been investigated. To improve the crystallinity and quality of film, the film was three step annealed. Simple etching process and conditions for P(VDF/TrFE) film were established using top electrode as a mask. Poling is performed by several steps. $1.87\;{\mu}m$ thick P(VDF/TrFE) films were obtained with conditions such that the solution of 10 wt% concentration was spun at 3000rpm for 30 seconds. Before poling, dielectric constant and dielectric loss of P(VDF/TrFE) film were 13.5 and 0.042, respectively. After poling, dielectric constant and dielectric loss of P(VDF/TrFE) film were 11.5 and 0.037, respectively.

• Applied Microscopy
• /
• v.22 no.2
• /
• pp.97-117
• /
• 1992

In order to study process of spermiogenesis of the Korean greater horseshoe bat, Rhinolophus ferrumequinum korai, the cycle of seminiferous epithelium was examined by the light and electron microscope and the following results were obtained based on the epithelial cell differentiation. 1. Spermiogenesis occurred from early July to mid-Octber, and spermatogenic activity was vigorous from mid-August to late September. Spermatocytes including spermatogonia were found to be degenerated in only July. It is deduced that the degeneration serves as the mechanism to regulate effective use of energy to prepare for mating and hibernating periods, and regulation of breeding cycle. 2. Spermiogenesis of the Korean greater horseshoe bat was divided according to differentiation of the cell structure, into Golgi, cap, acrosome, maturation and spermiation phases; Golgi, cap and spermiation phases were further divided into two steps of early and late phase respectively, and acrosome phase into three steps of early, mid and late phases, and maturation phase has only one step. Hence, the spermiogenesis consists of ten phases. The first research was done in this article on the changes of chromatin with nucleus, the time of appearance and disappearance of chromatin granules, in case of Korean greater horseshoe bat (Rhinolophus ferrumequinum korai). Chromatin granule began to be condensed in late Golgi and the condensation proceeded to form an irregular mass of a electron-dense chromatin in a form of circular cylinder in the center of nucleus at the phase of maturation. Finally, the chromatin condensation proceeded and perfect nucleus of sperm with homogeneous density was formed when the sperm was separated from Sertoli cell. Therefore, appearance and disappearance of chromatin granules occurred in the period of time between late Golgi and maturation phase, The tail of sperm began to develop in early cap phase, Numerous lipid droplets were obseved in the cytoplasm of spermatids during the maturation phase, which seemed to be used as energy source necessary to make mature sperm during spermiogenesis.

• Journal of Radiation Protection and Research
• /
• v.42 no.2
• /
• pp.91-97
• /
• 2017

Background: A gamma energy identifying algorithm using spectral decomposition combined with smoothing method was suggested to confirm the existence of the artificial radio isotopes. The algorithm is composed by original pattern recognition method and smoothing method to enhance the performance to identify gamma energy of radiation sensors that have low energy resolution. Materials and Methods: The gamma energy identifying algorithm for the compact radiation sensor is a three-step of refinement process. Firstly, the magnitude set is calculated by the original spectral decomposition. Secondly, the magnitude of modeling error in the magnitude set is reduced by the smoothing method. Thirdly, the expected gamma energy is finally decided based on the enhanced magnitude set as a result of the spectral decomposition with the smoothing method. The algorithm was optimized for the designed radiation sensor composed of a CsI (Tl) scintillator and a silicon pin diode. Results and Discussion: The two performance parameters used to estimate the algorithm are the accuracy of expected gamma energy and the number of repeated calculations. The original gamma energy was accurately identified with the single energy of gamma radiation by adapting this modeling error reduction method. Also the average error decreased by half with the multi energies of gamma radiation in comparison to the original spectral decomposition. In addition, the number of repeated calculations also decreased by half even in low fluence conditions under $10^4$ ($/0.09cm^2$ of the scintillator surface). Conclusion: Through the development of this algorithm, we have confirmed the possibility of developing a product that can identify artificial radionuclides nearby using inexpensive radiation sensors that are easy to use by the public. Therefore, it can contribute to reduce the anxiety of the public exposure by determining the presence of artificial radionuclides in the vicinity.

• Proceedings of the Korean Biophysical Society Conference
• /
• 2003.06a
• /
• pp.34-34
• /
• 2003

Protein unfolding is a key step in several cellular processes, including protein translocation across some membranes and protein degradation by ATP-dependent proteases. C1pAP protease and the proteasome can actively unfold proteins in a process that hydrolyzes ATP, These proteases catalyze unfolding by processively unraveling their substrates from the attachment point of the degradation signal. As a consequence, the ability of a protein to be degraded depends on its structure as well as its stability. An ${\alpha}$-helix is easier to unravel than a ${\beta}$-strand. In multidomain proteins, independently stable domains are unfolded sequentially. The steric constraints imposed on substrate proteins during their degradation by the proteasome were investigated by constructing a model protein in which specific parts of the polypeptide chain were covalently connected through disulfide bridges. The cross-linked model proteins were fully degraded by the proteasome, but two or more cross-links retarded the degradation slightly. Our results suggest that the pore of the proteasome allows the concurrent passage of at least three stretches of a polypeptide chain, and also explain the limited degradation by the proteasome that occurs in the processing of the transcription factor NF-KB, and also implicate difficulty in degradation of amyloidal aggregates by the proteasome

• ETRI Journal
• /
• v.37 no.6
• /
• pp.1143-1153
• /
• 2015

In this paper, we propose an efficient architecture for a real-time image stitching engine for vision SoCs found in motor vehicles. To enlarge the obstacle-detection distance and area for safety, we adopt panoramic images from multiple telegraphic cameras. We propose a stitching method based on a fixed homography that is educed from the initial frame of a video sequence and is used to warp all input images without regeneration. Because the fixed homography is generated only once at the initial state, we can calculate it using SW to reduce HW costs. The proposed warping HW engine is based on a linear transform of the pixel positions of warped images and can reduce the computational complexity by 90% or more as compared to a conventional method. A dual-core SW/HW image stitching engine is applied to stitching input frames in parallel to improve the performance by 70% or more as compared to a single-core engine operation. In addition, a dual-core structure is used to detect a failure in state machines using rock-step logic to satisfy the ISO26262 standard. The dual-core SW/HW image stitching engine is fabricated in SoC with 254,968 gate counts using Global Foundry's 65 nm CMOS process. The single-core engine can make panoramic images from three YCbCr 4:2:0 formatted VGA images at 44 frames per second and frequency of 200 MHz without an LCD display.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.32 no.4
• /
• pp.28-38
• /
• 2004

Korean goral (Nemorhaedus caudatus raddeanus) is one of the endangered species in Korea, and the rugged terrain of the Soraksan National Park (373㎢) is a critical habitat for the species. But the goral population is threatened by habitat fragmentation caused by roads and hiking trails. The objective of this study was to develop a potential habitat suitability model for Korean goral in the park, and the model was based on the concepts of fuzzy set theory and multi-criteria evaluation. The process of the suitability modeling could be divided into three steps. First, data for the modeling was collected by using field work and a literature survey. Collected data included 204 points of GPS data obtained through a goral trace survey and through the number of daily visitors to each hiking trail during the peak season of the park. Second, fuzzy set theory was employed for building a GIS data base related to environmental factors affecting the suitability of the goral habitat. Finally, a multiple-criteria evaluation was performed as the final step towards a goral habitat suitability model. The results of the study were as follows. First, characteristics of suitable habitats were the proximity to rock cliffs, scattered pine (Pinus densiflora) patches, ridges, the elevation of 700∼800m, and the aspect of south and southeast. Second, the habitat suitability model had a high classification accuracy of 93.9％ for the analysis site, and 95.7％ for the validation site at a cut off value of 0.5. Finally, 11.7％ of habitatwith more than 0.5 of habitat suitability index was affected by roads and hiking trails in the park.