• 대한기계학회논문집B
• /
• 제27권3호
• /
• pp.311-318
• /
• 2003

The present work evaluates the effects of mixing vane shape on the flow structure and heat transfer downstream of mixing vane in a subchannel of fuel assembly. by obtaining velocity and pressure fields. turbulent intensity. flow-mixing factors. heat transfer coefficient and friction factor using three-dimensional RANS analysis. Four different shapes of mixing vane. which were designed by the authors were tested to evaluate the performances in enhancing the heat transfer. Standard k-$\varepsilon$ model is used as a turbulence closure model. and. periodic and symmetry conditions are set as boundary conditions. The flow blockage ratio is kept constant. but the twist angle of mixing vane is changed. The results with three turbulence models were compared with experimental data.

• Structural Engineering and Mechanics
• /
• 제76권5호
• /
• pp.579-590
• /
• 2020

This paper's objective is to investigate the effect of gravity on a micropolar thermoelastic medium with voids. The problem is assessed according to the three-phase-lag model. An analysis of the resulting non-dimensional displacement, temperature variation, and internal stress of the study material is carried out and presented graphically. The non-dimensional displacement, temperature, micro-rotation, the change in the volume fraction field and stress of the material are obtained and illustrated graphically. Comparisons are made with the results predicted by different theories for different values of gravity, the phase-lag of the heat flux and the phase-lag of the temperature gradient. The numerical results reveal that gravity and relaxation times have a significant influence on the distribution of the field quantities. Some notable insights of interest are deduced from the investigation.

• 한국소음진동공학회논문집
• /
• 제11권5호
• /
• pp.89-100
• /
• 2001

The Ritz method Is applied In a three-dimensional (3-D) analysis to obtain accurate frequencies for thick. linearly tapered. annular plates. The method is formulated for annular plates haying any combination of free or fixed boundaries at both Inner and outer edges. Admissible functions for the three displacement components are chosen as trigonometric functions in the circumferential co-ordinate. and a1gebraic polynomials in the radial and thickness co-ordinates. Upper bound convergence of the non-dimensional frequencies to the exact values within at least four significant figures is demonstrated. Comparisons of results for annular plates with linearly varying thickness are made with ones obtained by others using 2-D classical thin place theory. Extensive and accurate ( four significant figures ) frequencies are presented 7or completely free. thick, linearly tapered annular plates haying ratios of average place thickness to difference between outer radius (a) and inner radius (b) radios (h$_{m}$/L) of 0.1 and 0.2 for b/L=0.2 and 0.5. All 3-D modes are included in the analyses : e.g., flexural, thickness-shear. In-plane stretching, and torsional. Because frequency data liven is exact 7o a\ulcorner least four digits. It is benchmark data against which the results from other methods (e.g.. 2-D 7hick plate theory, finite element methods. finite difference methods) and may be compared. Throughout this work, Poisson\`s ratio $\upsilon$ is fixed at 0.3 for numerical calculations.s.

• 터널과지하공간
• /
• 제25권3호
• /
• pp.275-283
• /
• 2015

연약지반에서 지하 공동의 굴착은 지반침하로 인하여 인근 지반 및 구조물에 영향을 끼치게 되고 그 결과 도로 및 시설물의 안정성에 심각한 위험요소로 작용하고 있다. 따라서 구조물의 안정 및 지반보강을 위하여 여러 가지 공법과 주입재료들을 사용하고 있다. 본 연구에서는 실내 모형실험을 실시하여 연약지반에서 다양한 종류의 지하공동 굴착 시 상부 지반보강에 따른 지반침하량을 비교 분석하였으며 3차원 유한차분법에 근거한 FLAC 3D를 사용하여 지하공동 굴착에 따른 지반 침하를 수치적으로 모사했다. 모형실험에서의 결괏값과 수치해석의 결괏값이 비교적 일치하는 결과를 토대로 수치해석상에서 보강범위를 달리하여 지반 침하량을 비교 분석하였으며, 그 결과 다양한 종류의 지하공동을 굴착함에 따른 지반침하 발생 여부 및 침하량 산정을 3차원 수치해석을 통해 보다 정확하게 구현할 수 있으며, 본 연구 결과는 지반침하 방지공법의 자료로 이용될 수 있을 것으로 사료된다.

• 수산해양기술연구
• /
• 제56권3호
• /
• pp.230-237
• /
• 2020

In order to design a diesel engine system and predict its performance, it is necessary to analyze the gas flow of the intake and exhaust system. A gas flow analysis in three-dimensional (3D) format needs a high-resolution workstation and enormous time for analysis. Therefore, the method of characteristics (MOC) was used for a gas flow analysis with a fast calculation time and a low-resolution workstation. An experiment was conducted on a single cylinder diesel engine to measure pressure in cylinder, intake pipe and exhaust pipe. The one-dimensional (1D) gas flow was analyzed under the same conditions as the experiment. The engine speed, valve timing and compression ratio were the same conditions and the intake pressure was inputted as the experimental results. Bent pipe such as an exhaust port that cannot be realized in 1D was omitted. As results of validation, the cylinder pressure showed accuracy, but the exhaust pipe pressure exhibited inaccuracy. This is considered as an error caused by the failure to implement a bent pipe such as an exhaust port. When analyzed in 3D, calculation time required 61 hours more based on a model of this study. In the future, we intend to implement a bent pipe that cannot be realized in 1D using 3D and prepare a method to supplement reliability by using 1D-3D coupling.

• 한국방재안전학회논문집
• /
• 제13권2호
• /
• pp.53-63
• /
• 2020

본 연구에서는 2차원 흐름 해석 모형인 Hydro_AS-2D 모형을 이용하여 해수면 상승과 극한 홍수 발생 시 창원시 성산구 및 의창구 일대의 침수피해 상황을 모의하고, 그 결과를 3차원 지형 상에 표출한 후 BIM 기술을 이용하여 최적 대피경로를 도출하였다. 기후변화는 홍수재해 측면에서 크게 두 가지 요소에 영향을 미치는데 해수면 상승과 극한 강우사상의 증가이다. 해수면 상승은 그 자체만으로 연안지역에 해수가 범람하여 침수현상을 유발하는 영향을 미칠 수 있을 뿐 아니라 하천의 기점 홍수위를 상승시켜 하천 전체에 걸쳐 홍수위 상승을 유발한다. 본 연구에서는 기후변화에 의한 해수위 상승과 태풍에 의한 폭풍해일에 의한 해수위 상승, 그리고 태풍에 의한 극한 강우사상을 모의조건으로 설정하였다. 창원시의 지형공간정보와 하천정비기본계획의 하천횡단 정보를 이용하여 유역전체의 3차원 공간정보로 구성하고 이를 수치모형화 하였다. 연구대상지역은 BIM 기술을 이용하여 3차원 지형정보 상에 건물의 층고, 대피소 위치 등의 정보를 가지고 있는 3차원 도시정보모델로 구축하였으며, 수치모의 결과를 이 모델 상에 표출하고 대피계획을 위한 분석에 사용하였다. 침수발생 시 대피경로는 시간에 따른 침수 범위의 변화에 따라 대피소로의 경로를 설정하는 알고리즘에 의해 결정되며, 설정된 경로는 직관적인 3차원 공간정보 상에 표출되어 사용자에게 제공된다.

• Smart Structures and Systems
• /
• 제18권1호
• /
• pp.155-181
• /
• 2016

In the present paper we discuss the stability and the post-buckling behaviour of thin piezoelastic plates. The first part of the paper is concerned with the modelling of such plates. We discuss the constitutive modelling, starting with the three-dimensional constitutive relations within Voigt's linearized theory of piezoelasticity. Assuming a plane state of stress and a linear distribution of the strains with respect to the thickness of the thin plate, two-dimensional constitutive relations are obtained. The specific form of the linear thickness distribution of the strain is first derived within a fully geometrically nonlinear formulation, for which a Finite Element implementation is introduced. Then, a simplified theory based on the von Karman and Tsien kinematic assumption and the Berger approximation is introduced for simply supported plates with polygonal planform. The governing equations of this theory are solved using a Galerkin procedure and cast into a non-dimensional formulation. In the second part of the paper we discuss the stability and the post-buckling behaviour for single term and multi term solutions of the non-dimensional equations. Finally, numerical results are presented using the Finite Element implementation for the fully geometrically nonlinear theory. The results from the simplified von Karman and Tsien theory are then verified by a comparison with the numerical solutions.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.683-686
• /
• 2002

The hydrodynamic instability of the three-dimensional boundary-layer over a rotating disk has been numerically investigated for three cases flows using linear stability theory (i.e. Rossby number, Ro = -1, 0, and 1). Detailed numerical values of the disturbance wave number, wave frequency, azimuth angle, radius (Reynolds number, Re) and other characteristics have been calculated for $K{\acute{a}}rm{\acute{a}}n$, Ekman and $B{\"{o}}ewadt$ boundary-layer flows. Neutral curves for these flows are presented. Presented are the neutral stability results concerning the two instability modes (Type I and Type II) by using a two-point boundary value problem code COLUEW that was based upon the adaptive orthogonal collocation method using B-spline. The prediction from the present results on both instability modes among the three cases agrees with the previously known numerical and experimental data well.

• 한국해양공학회지
• /
• 제20권5호
• /
• pp.36-41
• /
• 2006

The main object of this study is to develop an accurate and convenient method for the response analysis of offshore structures in real sea states. A numerical procedure is described for predicting the motion responses and tension variations of the ISSC TLP in multi-directional irregular waves. The developed numerical approach in the frequency domain is based on acombination of the three dimensional source distribution method, the dynamic response analysis method, and the spectral analysis method. Frequency domain analysis in the multi-directional irregular waves is expanded to a time domain analysis by using a convolution integral after obtaining the impulse response by Fourier transformation. The results of the comparison between responses in the frequency and time domain confirmed the validity of the proposed approach.

• 대한기계학회논문집
• /
• 제13권5호
• /
• pp.1044-1051
• /
• 1989

본 연구에서는 Wu가 제시한 수학적 모델에 기초를 둔 비점성 준3차원 유동해 석에 실제 유체의 점성효과 및 2차유동 등에 의해 발생하는 손실들을 손실모델로 반영하여 그 타당성 유무를 검토하는 데 목적을 두었다.