• 대한기계학회논문집B
• /
• 제26권4호
• /
• pp.578-586
• /
• 2002

Flow structures around a rectangular prism have been investigated by using a PIV(Particle Image Velocimetry) technique. A thick turbulent boundary layer was generated by using spires arid roughness elements. The boundary layer thickness, displacement thickness and momentum thickness were 650mm, 117.4mm and 78mm, respectively. The ratio between the model height(40mm) and the boundary layer thickness H/$\delta$, was 0.06. The Reynolds number based on the free stream velocity and the height of the model was 7.9$\times$10$^3$. The PIV measurements were performed at three different wall normal planes. Three recirculation regions at forward facing step, top of the roof and backward facing step are clearly seen and show three dimensional features. Dramatic changes of flow patterns are observed in the wake regions in the different spanwise wall normal planes. Instead of reattachment and recirculation zone, rising streamlines are depicted at the normal planes near the side wall due to the interaction with a rising horse shoe vortex. The peak of turbulent kinetic energy occurs at the separation bubble on top of the roof and the magnitude is 2.5 times higher compared with that of the wake region.

• 한국정밀공학회지
• /
• 제22권6호
• /
• pp.213-221
• /
• 2005

An insole type local shear force measurement system was developed and local shear stresses in the foot were measured during level walking. The shear force transducer based on the magneto-resistive principle, was a rigid 3-layer circular disc. Sensor calibrations with a specially designed calibration device showed that it provided relatively linear sensor outputs. Shear transducers were mounted on the locations of four metatarsal heads and heel in the insole. Sensor outputs were amplified, decorded in the bluetooth transmission part and then transferred to PC. In order to evaluate the developed system, both shear and plantar pressure measurements, synchronized with the three-dimensional motion analysis system, were performed on twelve young healthy male subjects, walking at their comfortable speeds. The maximum peak pressure during gait was 5.00kPa/B.W at the heel. The time when large local shear stresses were acted correlated well with the time of fast COP movements. The anteroposterior shear was dominant near the COP trajectory, but the mediolateral shear was noted away from the COP trajectory. The vector sum of shear stresses revealed a strong correlation with COP movement velocity. The present study will be helpful to select the material and to design of foot orthoses and orthopedic shoes for diabetic neuropathy or Hansen disease.

• 센서학회지
• /
• 제8권5호
• /
• pp.400-406
• /
• 1999

(100), n/$n^+$/n 3층 실리콘 웨이퍼를 이용하여 4가지 형태의 미소 빔 구조를 가지는 압저항형 유체센서를 제작하고, 그 특성을 조사하였다. Boron 확산을 통하여 압저항을 형성하였으며 형성된 압저항의 저항 값은 $1\;k{\Omega}$ 정도였다. 다공질 실리콘 마이크로머시닝을 이용하여 3차원의 실리콘 미소 빔 구조체를 제작하였으며, 실리콘과 금속의 열팽창계수 차이를 이용하여 빔을 위로 휘게 하여 원하는 형상으로 제조하였다. 제조된 센서의 출력 특성은 half-bridge를 구성하여 조사하였다. 같은 유속에서는 빔의 길이에 비례하여 출력 전압이 증가함을 보였고, 반면에 빔의 길이가 짧을수록 측정 가능 구간이 넓게 나타났다. 제조된 센서의 출력전압은 유량의 3.2승에 비례하여 증가하였으며, 이는 유속에 따른 빔이 받는 응력이 비 선형 특성을 나타내기 때문이다.

• Journal of Radiation Protection and Research
• /
• 제45권3호
• /
• pp.101-107
• /
• 2020

Background: An important lesson learned from the Fukushima accident is that the transition to the mid- and long-term phases from the emergency-response phase requires less than a year, which is not very long. It is necessary to know how much radioactive material has been deposited in an urban area to establish mid- and long-term countermeasures after a radioactive accident. Therefore, an urban deposition model that can indicate the site-specific characteristics must be developed. Materials and Methods: In this study, the generalized urban deposition velocity and the subsequent variation in radionuclide contamination were estimated based on the characteristics of the Korean urban environment. Furthermore, the application of the obtained generalized deposition velocity in a hypothetical scenario was investigated. Results and Discussion: The generalized deposition velocities of ¹³⁷Cs, ¹⁰⁶Ru, and ¹³¹I for each residence type were obtained using three-dimensional (3D) modeling. For all residence types, the deposition velocities of ¹³¹I are greater than those of ¹⁰⁶Ru and ¹³⁷Cs. In addition, we calculated the generalized deposition velocities for each residential types. Iodine was the most deposited nuclide during initial deposition. However, the concentration of iodine in urban environment drastically decreases owing to its relatively shorter half-life than ¹⁰⁶Ru and ¹³⁷Cs. Furthermore, the amount of radioactive material deposited in nonresidential areas, especially in parks and schools, is more than that deposited in residential areas. Conclusion: In this study, the generalized urban deposition velocities and the subsequent deposition changes were estimated for the Korean urban environment. The 3D modeling was performed for each type of urban residential area, and the average deposition velocity was obtained and applied to a hypothetical accident. Based on the estimated deposition velocities, the decision-making systems can be improved for responding to radioactive contamination in urban areas. Furthermore, this study can be useful to predict the radiological dose in case of large-scale urban contamination and can support decision-making for long-term measurement after nuclear accident.

• 대한기계학회논문집B
• /
• 제34권12호
• /
• pp.1087-1092
• /
• 2010

단일카메라 기반의 마이크로 스테레오 PTV 측정시스템을 구축하였다. 단일의 카메라에 부착되는 마이크로 대물렌즈 후부에 2 개의 핀을 가진 얇은 원판을 설치하여 한 장의 영상에 스테레오 영상을 얻을 수 있었다. 스테레오 영상간의 동일한 입자영상을 대응시키기 위하여(matching) 반복계산 기반의 PTV 알고리듬을 구축하였다. 계산시간을 줄이기 위하여 에피폴라선을 이용하였으며 스테레오 영상으로부터 얻어진 동일입자들의 3 차원 위치정보(X, Y, Z)의 시간 이동량을 계산함으로써 3 차원 속도벡터를 구하였다. 측정시스템은 광원레이저(Ar-ion, 500mW), 1 대 카메라($1028{\times}1024$ pixel, 500fps), 2 개의 핀홀을 지닌 원판 및 호스트컴퓨터로 구성된다. 가상영상을 이용하여 2 개의 핀홀 간격과 핀홀 직경의 크기변화에 대한 측정알고리듬의 오차와 속도벡터 회복률 특성을 구하였다. 구축된 시스템을 마이크로후향단채널($H{\times}h{\times}W:\;36{\mu}m{\times}70{\mu}m{\times} 3000{\mu}m$) 유동의 측정에 적용하여 얻어진 결과를 수치계산 결과와의 비교로부터 정성적으로 일치한 결과를 얻었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권7호
• /
• pp.957-965
• /
• 2011

The wakes of a cylindrical body have been investigated. The cylindrical body was attached with a thin film. The film is made of silicon with configurations of 50mm(W) ${\times}$ 150mm(L) ${\times}$ 0.3mm(T). The cylinder wakes have been measured with PIV experiments under the conditions with and without the thin film. The diameter of the installed cylinder body is 30mm and the Reynolds numbers are 2730, 6160 and 9750 with the diameter. The measurement system consists of an Ar-ion laser(6W), a high speed camera(1024 ${\times}$ 992 pixel, 500fps) and a host computer. FFT analyses have been carried out using the velocity vectors obtained by PIV measurements at the point X/D=1.52 and Z/D=0.52. For understanding the three-dimensional flow structures, a new Volumetric PTV(particle tracking velocimetry) has been constructed, in which the same four high-resolution cameras have been used. It has been verified that the flexible film suppresses or damps the vortices separated from the cylinder body, which makes the cylinder's wakes stable. With increase of Re numbers the intensity of the dominant frequency of the wakes become smaller.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제1권4호
• /
• pp.239-247
• /
• 2001

The Fluorescence-Activated Cell Sorter (FACS) is a well-established instrument used for identifying, enumerating, classifying and sorting cells by their physical and optical characteristics. For a miniaturized FACS device, a disposable plastic microchip has been developed which has a hydrodynamic focusing chamber using soft lithography. As the characteristics of the spatially confined sample stream have an effect on sample throughput, detection efficiency, and the accuracy of cell sorting, systematic fluid dynamic studies are required. Flow visualization is conducted with a laser scanning confocal microscopy (LSCM), and three-dimensional flow structure of the focused sample stream is reconstructed from 2D slices acquired at $1\mutextrm{m}$ intervals in depth. It was observed that the flow structure in the focusing chamber is skewed by unsymmetrical velocity profile arising from trapezoidal cross section of the microchannel. For a quantitative analysis of a microscopic flow structure, Confocal Micro-PIV system has been developed to evaluate the accelerated flow field in the focusing chamber. This study proposes a method which defines the depth of the measurement volume using a detection pinhole. The trajectories of red blood cells (RBCs) and their interactions with surrounding flow field in the squeezed sample stream are evaluated to find optimal shape of the focusing chamber and fluid manipulation scheme for stable cell transporting, efficient detection, and sorting

• 한국항공우주학회지
• /
• 제42권2호
• /
• pp.134-143
• /
• 2014

추운 기후에서 운영되는 풍력터빈 시스템의 표면에 발생한 결빙으로 인하여 공기역학적 성능이 크게 저하될 수 있다. 이러한 결빙은 양력감소 및 항력증가를 야기하고, 발전효율에 부정적인 영향을 미치게 된다. 이로 인하여 풍력발전기의 성능저하 또는 과부하, 무게중심의 변화에 따른 과도진동, 결빙파편이 지상으로 떨어질 경우의 안전성 문제, 계기의 결빙으로 인한 계기 측정오차, 최악의 경우 풍력 시스템 정지 등의 문제가 발생한다. 본 연구에서는 결빙증식이 풍력 발전기의 공력특성에 미치는 영향을 CFD 기법을 이용해 분석하였다. 또한 결빙증식 결과를 바탕으로 BEM 기법을 적용시켜 삼차원 블레이드에 대한 공력성능을 계산하였다. 결빙의 두께는 상대적인 속도차이에 의해 블레이드 중심에서 끝단으로 갈수록 증가함을 알 수 있었고, 공기의 속도가 결빙증식에 미치는 주요 인자임을 확인하였다.

• Journal of Mechanical Science and Technology
• /
• 제15권12호
• /
• pp.1835-1844
• /
• 2001

The turbulent flow with wake, reattachment and recirculation is a very important problem that is related to vehicle dynamics and aerodynamics. The Smagorinsky Model (SM), the Dynamics Subgrid Scale Model (DSM), and the Lagrangian Dynamic Subgrid Scale Model (LDSM) are used to predict the three-dimensional flow field around a bluff body model. The Reynolds number used is 45,000 based on the bulk velocity and the height of the bluff body. The fully developed turbulent flow, which is generated by the driver part, is used for the inlet boundary condition. The Convective boundary condition is imposed on the outlet boundary condition, and the Spalding wall function is used for the wall boundary condition. We compare the results of each model with the results of the PIV measurement. First of all, the LES predicts flow behavior better than the k-$\xi$ turbulence model. When ew compare various LES models, the DSM and the LDSM agree with the PIV experimental data better than the SM in the complex flow, with the separation and the reattachment at the upper front part of th bluff body. But in the rear part of the bluff body, the SM agrees with the PIV experimental results better than them. In this case, the SM predicts overall flow behavior better than the DSM nd the LDSM.

• 한국가스학회지
• /
• 제17권5호
• /
• pp.15-21
• /
• 2013

본 연구는 3차원 위험성평가 시뮬레이션 툴(FLACS)을 활용하여 연료의 종류에 따른 위험성을 비교 평가하였다. 일반적인 고압가스 충전소 레이아웃을 활용하여 연료를 CNG, 수소, 30%HCNG로 하였을 경우 충전소에서 가스누출에 의한 화재 폭발 상황을 모사하여 피해영향을 비교 분석하였다. 그리고 가스별 누출제트에 의한 피해영향을 평가하였다. 동일한 조건에서 수소, CNG, HCNG가 누출되어 화재폭발이 발생할 경우 수소는 최대과압이 30kPa, HCNG는 3.5kPa 그리고 CNG는 0.4kPa의 과압이 측정되었다. HCNG의 과압이 CNG에 비해 7.75배 높게 측정되었으나, 수소에 비해서는 11.7%에 불과했다. 화염 전파에 있어서 수소는 매우 빠른 화염전파 특성을 가지는 반면 HCNG와 CNG는 수소에 비해 전파속도 및 전파거리에서 비교적 안전한 경향을 보였다. 제트화염에 의한 화염경계거리는 수소가 5.5m, CNG가 3.4m이고 HCNG는 CNG보다 약간 확장된 3.9m로 예측되었다.