• Restorative Dentistry and Endodontics
• /
• v.32 no.1
• /
• pp.28-36
• /
• 2007

The purpose of this study was to compare the effect of exponential curing method with conventional curing and soft start curing method on polymerization shrinkage of composite resins. Three brands of composite resins (Synergy Duo Shade, Z250, Filtek Supreme) and three brands of light curing units (Spectrum 800, Elipar Highlight, Elipar Trilight) were used. 40 seconds curing time was given. The shrinkage was measured using linometer for 90 seconds. The effect of time on polymerization shrinkage was analysed by one-way ANOVA and the effect of curing modes and materials on polymerization shrinkage at the time of 90s were analysed by two-way ANOVA. The shrinkage ratios at the time of 20s to 90s were taken and analysed the same way. The results were as follows : 1. All the groups except Supreme shrank almost within 20s Supreme cured by soft start and exponential curing had no further shrinkage after 30s (p < 0.05). 2. Statistical analysis revealed that polymerization shrinkage varied among materials (p = 0.000) and curing modes (p = 0.003). There was no significant interaction between material and curing mode. 3. The groups cured by exponential curing showed the statistically lower polymerization shrinkage at 90s than the groups cured by conventional curing and soft start curing (p < 0.05). 4. The initial shrinkage ratios of soft start and exponential curing were statistically lower than conventional curing (p < 0.05). From this study, the use of low initial light intensities may reduce the polymerization rate and, as a result, reduce the stress of polymerization shrinkage.

• The Journal of Advanced Prosthodontics
• /
• v.4 no.2
• /
• pp.93-96
• /
• 2012

PURPOSE. The objective of this study was to compare the light transmittance of zirconia in different thicknesses using various light curing units. MATERIALS AND METHODS. A total of 21 disc-shaped zirconia specimens (5 mm in diameter) in different thicknesses (0.3, 0.5 and 0.8 mm) were prepared. The light transmittance of the specimens under three different light-curing units (quartz tungsten halogen, light-emitting diodes and plasma arc) was compared by using a hand-held radiometer. Statistical significance was determined using two-way ANOVA (${\alpha}$=.05). RESULTS. ANOVA revealed that thickness of zirconia and light curing unit had significant effects on light transmittance ($P$ <.001). CONCLUSION. Greater thickness of zirconia results in lower light transmittance. Light-emitting diodes light-curing units might be considered as effective as Plasma arc light-curing units or more effective than Quartz-tungsten-halogen light-curing units for polymerization of the resin-based materials.

• The Research Journal of the Costume Culture
• /
• v.5 no.2
• /
• pp.195-205
• /
• 1997

The purpose of this study was to identify the effect of genderand body cathexis on clothing behavior (interest in clothing and clothing satisfaction/dissatisfaction). The questionnaire were administered to 395 college students living in Jechon. Data were analyzed by frequency, factor analysis, t-test, ANOVA, two-way ANOVA, Duncan's Multiple Range Test and Pearson's Correlation. The results of this study were as follows : 1) body-cathexis was higher in men than women. In general, students were more satisfied with upper body parts than lower body parts. 2) There was no relationship between interest in cloghing and body-cathexis. But woman showed more interest in clothing than man, therefore sex showed main effect. And there was interaction between sex and body-cathexis on interest in clothing. 3) Clothing satisfaction was devided into aesthetic/economical/practical factors. Among three satisfaction factors, body cathexis has the main effect in economic factor, and there was no interaction. But in aesthetic factor, gender and body-cathexis showed interaction and body-cathexis showed main effect.

• Journal of Technologic Dentistry
• /
• v.43 no.2
• /
• pp.35-41
• /
• 2021

Purpose: This study aimed to investigate the flexural strength and surface microstructure of the zirconia crown according to the number of glazing zirconia prostheses. Methods: The specimens were made as follows. A specimen without glazing: 1ea, first glazed specimens (group B): 10ea, second glazed specimens (group C): 10ea, third glazed specimens (group D): 10ea. Three-point measuring strength equipment and electron microscopes were used for strength measurement and microstructure observation. As for statistical analysis, one-way ANOVA and t-test (level of significance level=5%) were used to determine the difference in the change in flexural strength according to the number of glazing zirconia prostheses. Results: ANOVA analysis of groups B (1st glazing), C (2nd glazing), and D (3rd glazing) revealed that the change in strength between the groups is statistically significant (p=0.023). The Mann-Whitney test for each group revealed that the difference in flexural strength between groups B and C was not statistically significant (z=-0.302, p=0.762) while that between groups C and D was statistically significant (z=-0.257, p=0.01). Microstructure observation revealed 3 changes in the microstructure of the surface of the glaze powder were observed. Conclusion: According to the number of glazing zirconia prostheses, it was found that the difference in strength between groups was statistically significant, and changes in the microstructure were observed.

• Journal of Sasang Constitutional Medicine
• /
• v.25 no.4
• /
• pp.330-342
• /
• 2013

Objectives This study was to examine the differences on alexithymia, rumination, depression and somatic symptoms by each Sasang constitution, and aimed at combining the psychological construct with Korean medical treatment. Methods One hundred eighty men and women aged from 20 to 69 who reside in Geoje-si were selected, and data from 173 people consisting of the three constitutions-Soyangin(39), Taeeumin(83), and Soeumin(51), excepted the minority sample of Taeyangin(7 people)-were analyzed. Collected data were analyzed and tested by IBM SPSS Statistics 20: frequency analysis for demographic data; t-test for gender differences; one-way ANOVA for differences among three constitutions; and Pearson correlation analysis for the correlation between variables. Results The result of t-test taken for the gender differences between variables was not significant. According to the result of one-way ANOVA conducted by different Sasang constitutions, no variables showed a significant result except that of alexithymia. The correlation analysis showed that the alexithymia had positive correlation with rumination, depression, and somatic symptoms. Rumination was in positive correlation with depression and somatic symptoms. Especially, depression had high positive correlation with somatization symptoms. Among the variables analyzed by each constitution, only the survey result of the alexithymia was significant. Conclusions Given that each constitution showed different levels of the alexithymia, it can be concluded that therapeutic intervention in the treatment for the Taeeumin who shows a high level of alexithymia is needed to improve their emotional recognition and expression. In this context, application of program which focus on the emotional ability such as emotion coaching to the Korean medical treatment is expected to improve alexithymia, depression, and somatic symptoms.

• Journal of Korean Academy of Nursing
• /
• v.45 no.3
• /
• pp.367-377
• /
• 2015

Purpose: The purpose of this study was to evaluate the effects of essential oil on oxidative stress, immunity, and skin condition in atopic dermatitis (AD) induced mice. Methods: This study was a $3{\times}3$ factorial design. Factors were oil type (Lavender, Thyme, and 2:1 mixture of lavender and thyme oil [blending oil]) and treatment period (0 day, 7 days, and 21 days). The samples were 45 mice with AD and randomly assigned to nine groups of five mice per group. The dependent variables such as superoxide radical, IgE, degranulated mast cells, and epidermal thickness were measured. Data were collected from February to April in 2014. Descriptive statistics, One-way ANOVA, Two-way ANOVA, and Tukey's HSD test were performed using the SPSS WIN 20.0 program. Results: Dependent variables were not statistically significantly different by the three oil types (p >.05). Essential oils such as lavender, thyme, and blending oil were all effective in reducing AD symptoms and especially 2:1 blending oil were most effective. There were statistically significant differences by the three treatment periods in all dependent variables (p <.001). There were statistically significant interactions between oil types and treatment periods in all dependent variables (p <.01). For decreasing superoxide radical, degranulated mast cells, and epidermal thickness, 2:1 mixed oil should be applied for at least 21 days. Otherwise to reduce IgE, 2:1 mixed oil should be used for at least 7 days. Conclusion: These findings provide bases for developing effective interventions for AD patients to manage their AD symptoms.

• Journal of Digital Convergence
• /
• v.12 no.6
• /
• pp.415-423
• /
• 2014

The purpose of this study was to investigate the level of multicultural competencies and influencing factors of multicultural competencies in nursing students. The participants of 181 subjects were recruited from three colleges in K and B. A structured questionnaire was used to collect data, and data were analyzed using descriptive statistics, t-test, one way-ANOVA and multiple regression with SPSS/WIN 17.0. Results showed that cultural competence of nursing students was middle range. There was a significant positive correlation between cultural competence, empathy, and self-efficacy. The significant factors influencing cultural competence of nursing students were empathy, self-efficacy, and education of multiple cultural. These three factors explained 51% of the variance in multicultural competencies of nursing students. The study finding suggest that to develop the learning program with achievement level of multicultural competencies for nursing students.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.5
• /
• pp.400-405
• /
• 2015

PURPOSE. The purpose of this study is to mix dental ceramic powder in varying ratios and evaluate the effect of the mixing ratio on color and translucency. MATERIALS AND METHODS. The ceramic powder of shade A3 of the same product was mixed with the shade A2 of three products: IPS e.max Ceram (Ivoclar Vivadent, Schaan, Liechtenstein), Vintage Halo (SHOFU Inc., Kyoto, Japan), and Ceramco 3 (Ceramco-Dentsply, Burlington, NJ, USA) in the following fixed ratios (0 wt%, 25 wt%, 50 wt%, 75 wt%, and 100 wt%) and then fired. A total of 150 specimen of ceramic fired were manufactured in a regular size (W: 8.5 mm, L: 10.5 mm, and H: 1.5 mm). For color and translucency, $L^*$, $a^*$, and $b^*$ were measured and Two-way analysis of variance (ANOVA) and One-way analysis of variance (ANOVA) were used for data analysis (${\alpha}$=0.05). RESULTS. The higher the mixing ratio was, $L^*$, $a^*$, and $b^*$ of IPS e.max Ceram were all increased, and $L^*$ of Vintage Halo was reduced and $a^*$ and $b^*$ were increased. $L^*$ and $a^*$ of Ceramco3 were reduced and $b^*$ of Ceramco3 was increased. Color difference (${\Delta}E^*ab$) was increased in all three products as the mixing ratio got higher. Increased mixing ratios resulted in decreased translucency parameter (TP) values for IPS e.max Ceram but increased TP values for Vintage Halo and Ceramco3. CONCLUSION. In this limited study, CIE $L^*$, $a^*$, and $b^*$ were influenced by the mixing ratio of the A3 powders and porcelain powder mixtures represented a various color and translucency.

• Journal of Technologic Dentistry
• /
• v.38 no.4
• /
• pp.255-262
• /
• 2016

Purpose: This study examined the effect of wettability of gypsum materials and rubber impression material on the marginal fitness of zirconia copings. Methods: Three commercially available gypsum materials(Fugirock EP, Snow Rock, Tuff Rock) and three zirconia blocks(iJAM Emerald, LUXEN Smile block, ICE Zirkon transluzent) were studied. The zirconia copings were fabricated by using dental CAD/CAM system. Contact angles on the impression materials were measured with contact angle measuring device. Silicone replica method was used to measure the marginal fitness and cutting was performed on the bucco-lingual and mesio-distal sides. It were observed with a stereomicroscope at °ø40 magnification. The data were statistically analyzed with One-way ANOVA. Results: Mean values of contact angles were $58.3{\pm}0.7^{\circ}$ for Tuff Rock, $77.5{\pm}0.5^{\circ}$ for Fugirock EP and $87.8{\pm}0.5^{\circ}$ for Snow Rock and the difference between them was statistically significant(p<0.05). The smallest values of marginal fitness for the JF groups were $30.7{\pm}3.0{\mu}m$ for bucco-lingual direction, $29.3{\pm}3.0{\mu}m$ for mesio-distal direction. One-way ANOVA showed statistically significant difference between groups for marginal fitness(p<0.05). Conclusion: Tuff rock gypsum material had superior wettability to others. The mean marginal fitness of the Tuff rock gypsum material group were significantly better than other groups. Thus they can be also expected to show clinically satisfactory marginal fitness.

• Restorative Dentistry and Endodontics
• /
• v.39 no.1
• /
• pp.17-23
• /
• 2014

Objectives: This study evaluated the efficacy of Endosolv-R and Xylene in softening epoxy resin based sealer after 1 to 2 min exposure. Materials and Methods: Sixty Teflon molds ($6mm{\times}1.5mm$ in inner diameter and depth) were equally divided into 3 groups of 20 each. AH 26 (Dentsply/De Trey), AH Plus (Dentsply/De Trey), Adseal (Meta-Biomed) were manipulated and placed in the molds allotted to each group and allowed to set at $37^{\circ}C$ in 100% humidity for 2 wk. Each group was further divided into 2 subgroups according to the solvents used, i.e. Xylene (Lobachemie) and Endosolv-R (Septodont). Specimens in each subgroup were exposed to respective solvents for 1 and 2 min and the corresponding Vicker's microhardness (HV) was assessed. Data was analysed by Mauchly's test and two-way analysis of variance (ANOVA) with repeated measures, and one-way ANOVA. Results: Initial hardness was significantly different among the three sealers with AH Plus having the greatest and Adseal having the least. After 2 min, Xylene softened AH Plus and Adseal sealer to 11% and 25% of their initial microhardness, respectively (p < 0.001), whereas AH 26 was least affected, maintaining 89.4% of its initial microhardness. After 2 min, Endosolv-R softened AH 26, AH Plus and Adseal to 12.7, 5.6 and 8.1% of their initial microhardness, respectively (p < 0.001). Conclusions: Endosolv-R was a significantly more effective short term softener for all the tested sealers after 2 min whereas Xylene was an effective short term softener against AH plus and Adseal but less effective against AH 26.