• 정보과학회 논문지
• /
• 제44권4호
• /
• pp.411-416
• /
• 2017

적외선 표적의 정밀한 모델링을 위해서는 정확한 표면온도 계산이 필요하다. 본 논문에서는 전도, 대류, 복사를 고려한 복합 열해석 모듈을 소프트웨어로 구현하고, 이를 통하여 표적 재질 및 자세, 환경 요건에 따른 표적의 표면온도 해석을 수행 하였다. 구현된 결과는 상용 소프트웨어인 OKTAL-SE 와의 비교를 통하여 결과의 신뢰성을 검증하였다. 그 결과 자체 검증이 완료된 상용 소프트웨어인 OKTAL-SE 와 약 1% 이내의 오차를 보였다. 계산된 온도 결과를 바탕으로 적외선 표적 모델링을 수행하였으며 OKTAL-SE와의 연동을 통해 적외선 신호 해석을 수행하였다.

• BMB Reports
• /
• 제39권5호
• /
• pp.578-585
• /
• 2006

The cDNA of a firefly luciferase from lantern mRNA of Lampyroidea maculata has been cloned, sequenced and functionally expressed. The cDNA has an open reading frame of 1647 bp and codes for a 548-residue-long polypeptide. Noteworthy, sequence comparison as well as homology modeling showed the highest degree of similarity with H. unmunsana and L. mingrelica luciferases, suggesting a close phylogenetic relationship despite the geographical distance separation. The deduced amino acid sequence of the luciferase gene of firefly L. maculata showed 93% identity to H. unmunsana. Superposition of the three-dimensional model of L. maculata luciferase (generated by homology modeling) and three dimensional structure of Photinus pyralis luciferase revealed that the spatial arrangements of Luciferin and ATP-binding residues are very similar. Putative signature of AMP-binding domain among the various firefly species and Lampyroidea maculata was compared and a striking similarity was found. Different motifs and sites have been identified in Lampyroidea maculata by sequence analysis. Expression and purification of luciferase from Lampyroidea maculata was carried out using Ni-NTA Sepharose. Bioluminescence emission spectrum was similar to Photinus pyralis luciferase.

• 한국전기전자재료학회논문지
• /
• 제18권5호
• /
• pp.414-422
• /
• 2005

This paper shows the results of atomistic modeling for the Interaction between spherical nano abrasive and substrate In chemical mechanical polishing processes. Atomistic modeling was achieved from 2-dimensional molecular dynamics simulations using the Lennard-jones 12-6 potentials. We proposed and investigated three mechanical models: (1) Constant Force Model; (2) Constant Depth Model, (3) Variable Force Model, and three chemical models, such as (1) Chemically Reactive Surface Model, (2) Chemically Passivating Surface Model, and (3) Chemically Passivating-reactive Surface Model. From the results obtained from classical molecular dynamics simulations for these models, we concluded that atomistic chemical mechanical polishing model based on both Variable Force Model and Chemically Passivating-reactive Surface Model were the most suitable for realistic simulation of chemical mechanical polishing in the atomic scale. The proposed model can be extended to investigate the 3-dimensional chemical mechanical polishing processes in the atomic scale.

• 한국기계가공학회지
• /
• 제16권6호
• /
• pp.139-145
• /
• 2017

It is necessary to analyze the exact contact position and contact stress of the wheel-rail in order to predict damage to the wheel and rail. This study presents a wheel-rail contact analysis model that considers the deformation of the axle. When a wheel-rail contact analysis is performed using a full three-dimensional model of the wheelset and rail, the analytical model becomes very inefficient due to the increase in analysis time and cost. Therefore, modeling the element-coupling model of the wheel and rail as a three-dimensional element and the axle as a one-dimensional element is proposed. The wheel-rail contact characteristics in the proposed analysis model for straight and curved lines were analyzed and compared with the conventional three-dimensional analysis model. Considering the accuracy of the analysis results and time, the result shows that the proposed analytical model has almost the same accuracy as a full three-dimensional model, but the computational effort is significantly reduced.

• 대한원격탐사학회지
• /
• 제16권4호
• /
• pp.339-345
• /
• 2000

KOMPSAT-1 was launched on 21 December, 1999 and the main mission of the satellite is the cartography to provide the imagery from a remote earth view for the production of maps of Korean territory. For this purpose, the satellite has capability to tilt the spacecraft utmost $\pm$45 degrees to acquire stereo satellite imagery in different paths. This study aims to estimate the three dimensional positioning accuracy of stereo satellite imagery from EOC(electro-optical camera), a payload of KOMPSAT-1 satellite. For this purpose, the ground control points and check points were obtained by GPS surveying. The sensor modeling and the adjustment was performed by PCI software installed in KARI (Korea Aerospace Research Institute), which contained mathematical analysis module for KOMPSAT-1 EOC. The study areas were Taejon and Nonsan, placed in the middle part of Korea. As a result of this study, we found that the RMSE(root mean square error) value of three dimensional positioning KOMPST-1 stereo imagery can be less than 1 pixel (6.6 m) if we can use about 10 GCPs(ground control points). Then, a standarrd of FGDC (Federal Geographic Data Committee) of USA was applied to the result to estimate the three dimensional positioning accuracy of KOMPSAT-1 stereo imagery.

• 산업경영시스템학회지
• /
• 제25권1호
• /
• pp.14-19
• /
• 2002

This paper describes an automatic parts design system for gears, brake, and clutch. These parts are important components of the power transmission assembly. In conventional design process, the design of power transmission requires a number of recurrent calculations and drawings. In this paper, we propose a three-dimensional automatic design system that reduces the number of recurrent calculations and drawings. The system consists of three modules for designing gear, brake, and clutch. The proposed system has been applied to develop a transmission of forklift truck and shown to be a useful system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.638-643
• /
• 1993

The three dimensional finite element models for the basic deflection of linear motion guides and ball screws were developed. Form the comparison of the results calculated by the finite element method with those by the experiment, it was proved that the modeling method might be applied to real machine tool structures. Form the structural analysis of the headstock of the machine tool, it was found that the static stiffness was calculated within 6.5% error

• 한국해안해양공학회:학술대회논문집
• /
• 한국해안해양공학회 1996년도 정기학술강연회 발표논문 초록집
• /
• pp.14-14
• /
• 1996

In order to understand the tidal hydrodynamics of the Yellow Sea and Parts of the East China Sea, we have developed a three-dimensional, fine resolution, nonlinear, harmonic finite element model. Major four tidal constituents, M$_2$, S$_2$, K$_1$ and O$_1$ are used as forcing along the open boundary. Due to the shallowness of the region, tidal results are strongly affected by the bottom roughness coefficients, especially for the quadratic form. (omitted)

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.432-439
• /
• 1999

In this paper, an off-line programming(OLP) system is presented as the three dimensional graphic simulator and one of the human-robot interface systems for industrial robots. The OLP system has been especially developed to testify robot programs visually using three dimensional geometric modeling and graphics technologies in personal computes. A special feature is its capability of collision detection and of comparing performance of control algorithms. This paper places the focus on the structure and major characteristic of OLP system.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 가을 학술발표회 논문집
• /
• pp.139-145
• /
• 2002

In this study, the geometric modeling has been conducted for 2 models of lower end fitting of advanced LWR fuel using three-dimensional solid modeler, Solidworks. Then, the optimization and the three-dimensional stress analysis using the finite element method has been peformed. The evaluation for the mechanical integrity of 2 models has been peformed based on the stress distribution obtained from the finite element analysis.