• 한국항공우주학회지
• /
• 제47권5호
• /
• pp.371-378
• /
• 2019

정밀지향위성은 반작용휠로 자세제어를 수행하며, 반작용휠의 모멘텀 덤핑은 3개의 자기토커로 이뤄진다. 본 논문에서는 자기토커 고장 시의 모멘텀 덤핑 영향성에 대해서 살펴본다. 높은 경사각을 가지는 궤도에 위치한 위성이 지구지향자세를 유지하고 있을 때 피치축 방향 자기토커가 고장나면 모멘텀 덤핑이 불가능하다. 하지만 다른 방향의 자기토커가 고장나면 성능 저하만 있을 뿐 모멘텀 덤핑은 여전히 가능하다. 피치축 방향의 자기토커가 고장났을 때도 위성자세변화를 통해서 모멘텀 덤핑을 할 수 있다. 또한 자기토커 배치를 변경하면, 어느 자기토커가 고장나더라도 모멘텀 덤핑이 항상 가능하다.

• 제어로봇시스템학회논문지
• /
• 제5권3호
• /
• pp.370-378
• /
• 1999

KOMPSAT is a three-axis stabilized light weight satellite, and one of the main mission objectives of the KOMPSAT is to conduct scientific and technological analysis in the areas of high resolution imaging and ocean color imaging. This kind of mission requires the satellite to roll up to 45 degrees. Bang-bang control for this rolling maneuver may activate the flexible modes, and therefore cause satellite pointing performance degradation. To deal with this problem, the roll attitude control system, especially for the science mode and maneuver mode of the KOMPSAT, is first verified by numerical simulation. And the open-loop control law for roll maneuver is proposed by use of series expansion and optimization. The proposed control law is applied to KOMPSAT to see its effectiveness.

• Journal of Mechanical Science and Technology
• /
• 제17권12호
• /
• pp.1912-1921
• /
• 2003

This paper presents a global mode modeling of space structures and a control scheme from the practical point of view. Since the size of the satellite has become bigger and the accuracy of attitude control more strictly required, it is necessary to consider the structural flexibility of the spacecraft. Although it is well known that the finite element (FE) model can accurately model the flexibility of the satellite, there are associated problems : FE model has the system matrix with high order and does not provide any physical insights, and is available only after all structural features have been decided. Therefore, it is almost impossible to design attitude and orbit controller using FE model unless the structural features are in place. In order to deal with this problem, the control design scheme with the global mode (GM) model is suggested. This paper describes a flexible structure modeling and three-axis controller design process and demonstrates the adequate performance of the design with respect to the maneuverability by applying it to a large flexible spacecraft model.

• International Journal of Aeronautical and Space Sciences
• /
• 제8권1호
• /
• pp.105-114
• /
• 2007

This article presents the details of a designed control moment gyroscope (CMG) with a constant speed momentum wheel and one-axis-gimbal, and its experimental results performed at Korea Aerospace Research Institute. The CMG which is able to produce a torque of lOO mNm per each, is mounted in a pyramid configuration with four SGCMGs. Each CMG test and a single axis maneuver test with four-CMG cluster configuration are performed to confirm their performance on a ground-test facilities consisted of three major parts: a vibration isolation system, a dynamic force plate (Kistler sensor), and a DSP board. These facilities provide the accurate data of three axial and torques from the control moment gyro. Details of the CMG experimental results are presented with discussion of the experimental errors. The experimental data are compared with theoretical results and both results are used to verify their performance specifications.

• 한국항공우주학회지
• /
• 제31권2호
• /
• pp.63-71
• /
• 2003

본 논문에서는 유연우주비행체의 강인 선회기동을 위한 슬라이딩 모드 제어기법에 대해 연구하였다. 본 연구에서는 유연우주비행체의 1축 선회기동을 위한 선회목표각, 목표각속도 및 중앙동체와 유연부착물 사이에 작용하는 내부 반력 모멘트를 포함하는 슬라이딩 평면을 설계하였다. Lyapunov 제어기법과 비교한 결과 두 제어기법 모두 공칭 시스템에 대한 명령 추종성을 확인하였으며, 특히 슬라이딩 모드 제어기법의 적용결과 시스템 파라메터의 변동 및 외란의 영향에도 좋은 제어결과를 얻을 수 있음을 확인하였다. 1축 선회제어 결과를 확장하여 임의의 3축 선회기동을 수행할 수 있는 슬라이딩 모드 제어기를 설계하였다. 3축 선회기동 제어를 위해 쿼터니언을 이용하여 비행체의 자세를 결정하였고, 3개의 축 각각에 대해 설계된 슬라이딩 평면으로부터 선회기동시 발생하는 각 축간의 커플링 효과를 고려하여 제어기를 설계하였다. 설계된 제어기는 효과적인 3축 선회기동을 수행할 수 있음을 수치 시뮬레이션을 통해 보여주고 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.50-53
• /
• 1989

This paper presents the configuration and performance test results of a SDARS, which consists of three rate gyros and Zilog 8002 microprocessor. Real time hardware-inthe-loop simulation was performed by 3 axis flight motion simulator applying the assumed typical profiles of angular motion. Test results showed that the performance of SDARS was satisfactory. And, attitude errors was reduced by compensation of gyro errors.

• 제어로봇시스템학회논문지
• /
• 제8권4호
• /
• pp.313-318
• /
• 2002

A robust attitude controller using Lyapunov redesign technique for spacecraft is proposed. In this controller, qua- ternion feedback is considered to have the attitude maneuver capability very close to the eigen-axis rotation. The controller consists of three parts: the nominal feedback parts which is a PD-type controller for the nominal system without uncertainties, the additional term compensating for the gyroscopic motion, and the third part for ensuring robustness to uncertainties. Lyapunov stability criteria is applied to stability analysis. The performance of the proposed controller is demonstrated via computer simulation.

• 항공우주기술
• /
• 제13권1호
• /
• pp.44-54
• /
• 2014

본 논문에서는 3구 추력기 2모듈 형태의 추력기시스템 기준으로 발사체 상단 자세제어용 추력기시스템 명령생성방식 2가지를 제시한다. 하나는 혼합오차함수를 이용하는 방식이고, 다른 하나는 명령혼합함수를 이용하는 방식이다. 시뮬레이션을 통해 두 방식을 비교 분석한 결과, 제어축 간의 상호 간섭, 각축 제어기의 독립적인 설계와 분석 용이성, 비행성능 예측 가능성 등의 관점에서 명령혼합 알고리듬이 상대적으로 유리함을 보인다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.30-30
• /
• 2000

In the three axis control of satellite by using reaction wheel and gyro, a Gyro carries out measuring of the attitude angie and the attitude angular velocity. The Gyro is operated by the electronic part and the mechanic actuator. The digital part of the electronic part is consisted of the FPGA (Field Programmable Gate Array), which is one of the methods for designing VLSI (Very Large Scale Integrated Circuit), and the mechanic actuator processes the input/output data by the dynamic model. In the research of the mixed mode of Gyro, the simulation is accomplished by SABER of the mixed mode simulator and the results for the practical implementation of the satellite ACS (Attitude Control System) interfaced with the data processing are proposed.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.242-242
• /
• 2002

The Earth's magnetic field acquired from KOMPSAT-1's TAM (Three-Axis Magnetometer) between June 19th and 21st 2000 was analyzed. The TAM, one of the KOMPSAT-1's Attitude and Orbit Control Subsystems, plays an important role in determining and controlling the satellite's attitude. This also can provide new insight on the Earth's magnetic field. By transforming the satellite coordinate from ECI to ECEF, spherical coordinate of total magnetic field was achieved. These data were grouped into dusk (ascending) and dawn (descending) data sets, based on their local magnetic times. This partitioning is essential for performing 1-D WCA (Wavenumber Correlation Analysis). Also, this enhances the perception of external fields in the Kompsat-1's TAM magnetic maps that were compiled according to different local. The dusk and dawn data are processed independently and then merged to produce a total field magnetic anomaly map. To extract static and dynamic components, the 1-D and 2-D WCAs were applied to the sub-parallel neighboring tracks and dawn-dusk data sets. The static components were compared with the IGRF, the global spherical harmonic magnetic field model. The static and dynamic components were analyzed in terms of corefield, external, and crustal signals based on their origins.