• 콘크리트학회논문집
• /
• 제24권5호
• /
• pp.525-533
• /
• 2012

이 연구에서는 UHPCC에서 섬유혼입률에 따른 초기균열강도 및 휨인장강도의 변화를 0~5 vol.% 범위에서 조사하였으며, 노치의 여부에 따른 영향을 파악하기 위해 노치가 없는 보에 대한 4점 재하실험 및 노치 낸 보에 대한 3점 재하실험을 같이 실시하였다. 실험 결과로부터 섬유혼입률이 증가함에 따라 휨인장강도는 선형적으로 강도가 향상됨을 확인할 수 있었고, 초기균열강도의 경우에는 1 vol.% 이상에서는 강도향상을 나타내었으나 그 이하의 섬유혼입에서는 강도향상 효과가 거의 없는 것으로 나타났다. 노치 유무에 따른 휨 실험으로부터 구한 UHPCC의 초기균열발생강도 및 휨 인장강도를 비교했을 때, 섬유혼입률에 따라 노치의 영향이 변하는 것으로 나타났다. 섬유혼입률이 증가함에 따라 노치에서의 응력집중의 영향이 감소하여 강도 차이가 점차 줄어들었으며, 높은 섬유혼입률에서는 노치에 의한 응력집중효과는 없어지고 균열면의 상태 및 크기효과의 영향이 지배적으로 작용하여 노치낸 보의 강도가 좀 더 크게 나타났다.

• 대한기계학회논문집A
• /
• 제25권10호
• /
• pp.1528-1534
• /
• 2001

In order to improve Leak-Be(ore-Break methodology, more precisely the crack growth evaluation, a round robin analysis was proposed by the CEA Saclay. The aim of this analysis was to evaluate the crack initiation life, penetration life and shape of through wall crack under cyclic bending loads. The proposed round robin analysis is composed of three main topic; fatigue crack initiation, crack propagation and crack penetration. This paper deals with the first topic, crack initiation in a notched pipe under four point bending. Both elastic-plastic finite element analysis and Neuber's rule were used to estimate the crack initiation life and the finite element models were verified by mesh-refinement, stress distribution and global deflection. In elastic-plastic finite element analysis, crack initiation life was determined by strain amplitude at the notch tip and strain-life curve of the material. In the analytical method, Neuber's rule with the consideration of load history and mean stress effect, was used for the life estimation. The effect of notch tip radius, strain range, cyclic hardening rule were examined in this study. When these results were compared with the experimental ones, the global deformation was a good agreement but the crack initiation cycle was higher than the experimental result.

• Computers and Concrete
• /
• 제9권1호
• /
• pp.1-19
• /
• 2012

The size-effect study of various fracture parameters obtained from two parameter fracture model, effective crack model, double-K fracture model and double-G fracture model is presented in the paper. Fictitious crack model (FCM) for three-point bend test geometry for cracked concrete beam of laboratory size range 100-400 mm is developed and the different fracture parameters from size effect model, effective crack model, double-K fracture model and double-G fracture model are evaluated using the input data obtained from FCM. In addition, the fracture parameters of two parameter fracture model are obtained using the mathematical coefficients available in literature. From the study it is concluded that the fracture parameters obtained from various nonlinear fracture models including the double-K and double-G fracture models are influenced by the specimen size. These fracture parameters maintain some definite interrelationship depending upon the specimen size and relative size of initial notch length.

• 한국산학기술학회논문지
• /
• 제18권6호
• /
• pp.697-702
• /
• 2017

본 연구에서는 현재 운행 중인 도시철도차량의 전동차 출입문에 규칙적 다공질 금속, 즉, 트러스 요소로 이루어진 피라미드 트러스 코어를 적용 가능한가에 대해 구조 강성 측면에서 검토하였다. 전동차 출입문은 내외피 사이 심재부에 허니콤과 보강재로 구성된 샌드위치 구조이며, 충분한 굽힘 강성과 내구성 등이 요구된다. 현재, 전동차 출입문의 기계적 성능은 한국철도표준규격(KRS)과 도시철도용품 품질규격에서 명시되고 있는데, 3점굽힘시험을 수행하여 중앙부의 처짐량을 측정하여 구조강성의 만족 여부를 판정하고 있다. 기존의 허니컴 코어를 채용한 출입문에 비해 피라미드 트러스 코어로 대체한 출입문의 구조강성 비교를 위하여 기존의 허니콤 코어와 동일한 무게의 두 종류의 피라미드 트러스 코어를 설계, 고려하였다. 이후 한국철도표준규격에 명시한 시험조건에 따라 유한요소해석을 실시하였다. 피라미드 트러스 코어를 적용한 전동차 출입문의 3점굽힘해석 결과 피라미드 트러스 심재 출입문은 기존의 허니콤 심재에 비해 약 2.5%의 처짐량이 더 발생하였지만, 규격에서 요구한 강성 조건을 충분히 만족시켰다. 따라서, 다기능성에 유리한 규칙적 다공질 금속인 피라미드 트러스 심재는 기존의 허니콤 기반의 출입문을 대체할 수 있을 것으로 판단된다.

• 디지털융복합연구
• /
• 제17권10호
• /
• pp.373-379
• /
• 2019

가철성 교정장치의 자가중합 레진인 Polymethyl methacrylate(PMMA)는 색의 안정성과 체적 안정성, 조직 친화성 등의 장점이 있어 오랫동안 치과 교정장치 재료로 사용해 왔다. 하지만 이러한 가철성 교정장치는 구강내에서 사용이 길어질수록 PMMA의 낮은 강도로 인하여 사용중 교정장치 레진상이 파절되는 단점이 있다. 본 연구에서는 zinc nanoparticle (ZNP)가 orthodontic PMMA에 혼합하여 강도효과를 도입하고자한다. ZNP을 함유된 orthodontic PMMA (0, 0.5, 1.0, 2.0 및 4.0%)의 직사각형 시료($1.4{\times}3.0{\times}19.0mm$)를 제작하였다. 제작완료된 시편을 1 mm/min의 속도로 3점 굽힘강도 시험하였고, 비커스 경도는 경도기를 이용하여 3회측정하였고, 표면조도기로 표면조도를 측정하였다. 그 결과 3점 굽힘강도는 유의한 변화가 없었다(p>0.05). 경도를 평가한 결과 역시 유지됨을 관찰하였다. 표면조도도 큰 차이가 보이지 않았다. 표면에너지는 유의차 있게 증가하였다. ZNP함유된 orthodontic PMMA는 의치 및 교정용 장치의 기계적 특성 대한 유의한 차이가 없음을 확인하였다. 결과적으로 본 연구에서 ZNP를 성공적으로 합성하고 이것이 분산된 교정용 레진 시편을 제작하였다. 추후 항균실험을 추가하여 고강도와 항균력이 있는 교정장치를 개발할 수 있는 연구가 필요하다.

• 한국건설순환자원학회논문집
• /
• 제7권3호
• /
• pp.279-286
• /
• 2019

본 연구에서는 기준압축강도 180MPa의 강섬유 보강 초고강도 콘크리트(UHSC)의 인장 특성에 관한 실험 연구를 수행하였다. 부피비 1%의 강섬유를 혼입하여 직접인장강도 시편과 3점 하중재하 휨 실험을 위한 프리즘 시편을 제작하였다. 제작된 시편은 균열 유도를 위하여 시편 중앙에 노치를 설정하였으며, 각 평가방법에 따라 실험을 수행하였다. 우선, 콘크리트의 균열 후 거동 특성을 파악하기 위하여 직접인장강도 실험을 수행하여 응력-변형률 곡선을 분석하였으며, 3점 하중재하 휨 실험을 통하여 하중-CMOD 곡선을 얻고, 역해석을 수행하여 응력-변형률 곡선을 분석하였다. 직접인장강도 실험과 3점 하중재하 휨 실험의 인장거동 특성은 유사하게 나타났다. 또한, SC 구조설계지침에서 제시하고 있는 인장응력-변형률 곡선 모델링을 수행하고, 측정값과 예측값의 비교분석을 수행하였다. 재료감소계수가 1.0일 때, 변형률이 0.02일 때까지 예측값은 측정값과 유사하게 나타나지만, 재료감소계수가 0.8일 때, 예측값은 측정값의 최소값에 근접한다. 또한, 변형률이 0.02를 초과하는 구간에서는 SC 구조설계지침에 의한 예측값이 측정값을 과소평가한다.

• Restorative Dentistry and Endodontics
• /
• 제44권4호
• /
• pp.45.1-45.10
• /
• 2019

Objectives: Self-adhesive resin cements contain functional monomers that enable them to adhere to the tooth structure without a separate adhesive or etchant. One of the most stable functional monomers used for chemical bonding to calcium in hydroxyapatite is 10-methacryloyloxydecyl dihydrogen phosphate (10-MDP). The aim of this study was to evaluate the influence of the10-MDP concentration on the bond strength and physical properties of self-adhesive resin cements. Materials and Methods: We used experimental resin cements containing 3 different concentrations of 10-MDP: 3.3 wt% (RC1), 6.6 wt% (RC2), or 9.9 wt% (RC3). The micro-tensile bond strength of each resin cement to dentin and a hybrid resin block (Estenia C&B, Kuraray Noritake Dental) was measured, and the fractured surface morphology was analyzed. Further, the flexural strength of the resin cements was measured using the three-point bending test. The water sorption and solubility of the cements following 30 days of immersion in water were measured. Results: The bond strength of RC2 was significantly higher than that of RC1. There was no significant difference between the bond strength of RC2 and that of RC3. The water sorption of RC3 was higher than that of any other cement. There were no significant differences in the three-point bending strength or water solubility among all three types of cements. Conclusions: Within the limitations of this study, it is suggested that 6.6 wt% 10-MDP showed superior properties than 3.3 wt% or 9.9 wt% 10-MDP in self-adhesive resin cement.

• The Journal of Advanced Prosthodontics
• /
• 제10권1호
• /
• pp.25-31
• /
• 2018

PURPOSE. The aim of the present study was to record the metal-ceramic bond strength of a feldspathic dental porcelain and a Co-Cr alloy, using the Direct Metal Laser Sintering technique (DMLS) for the fabrication of metal substrates. MATERIALS AND METHODS. Ten metal substrates were fabricated with powder of a dental Co-Cr alloy using DMLS technique (test group) in dimensions according to ISO 9693. Another ten substrates were fabricated with a casing dental Co-Cr alloy using classic casting technique (control group) for comparison. Another three substrates were fabricated using each technique to record the Modulus of Elasticity (E) of the used alloys. All substrates were examined to record external and internal porosity. Feldspathic porcelain was applied on the substrates. Specimens were tested using the three-point bending test. The failure mode was determined using optical and scanning electron microscopy. The statistical analysis was performed using t-test. RESULTS. Substrates prepared using DMLS technique did not show internal porosity as compared to those produced using the casting technique. The E of control and test group was $222{\pm}5.13GPa$ and $227{\pm}3GPa$, respectively. The bond strength was $51.87{\pm}7.50MPa$ for test group and $54.60{\pm}6.20MPa$ for control group. No statistically significant differences between the two groups were recorded. The mode of failure was mainly cohesive for all specimens. CONCLUSION. Specimens produced by the DMLS technique cover the lowest acceptable metal-ceramic bond strength of 25 MPa specified in ISO 9693 and present satisfactory bond strength for clinical use.

• 한국재료학회지
• /
• 제21권8호
• /
• pp.425-431
• /
• 2011

The industrial manufacturing of YSZ products can be summarized as a three step process: a) hydrolysis of zirconyl chloride and mixing of other solutions, b) precipitation, and c) calcination. The addition of ammonia or OH- is essential in the precipitation process. However, a strong agglomeration was observed in the results of an ammonia or OH- addition. Thus, it is necessary to disperse the powders smoothly in order to improve the mechanical strength of YSZ. In this study, YSZ was synthesized using the urea stabilizer and hydrothermal method. YSZ powders were synthesized using a hydrothermal method with Teflon Vessels at $180^{\circ}C$ for 24 h. The mole ratio of urea to Zr was 0, 0.5, 1, and 2. The crystal phase, particle size, and morphologies were analyzed. Rectangular specimens ($33\;mm{\times}8\;mm{\times}1{\pm}0.5\;mm$) for three-point bend tests were used in the mechanical properties evaluation. The crystalline of YSZ powders observed a tetragonal phase in the sample with a ratio of Zr:urea = 1:2 addition and a hydrothermal reaction time of 24 h. The average primary particle size of YSZ was measured to be 9 nm to 11 nm. The agglomerated particle size was measured from 15 nm to 30 nm. The three-point bending strength of the YSZ samples was 142.47 MPa, which is the highest value obtained for the Zr:urea = 1:2 ratio addition YSZ sample.

• Computers and Concrete
• /
• 제31권5호
• /
• pp.433-442
• /
• 2023

This study presents the visually observed behavior of fibers embedded in concrete samples that were subjected to a flexural bending test. Three types of fibers such as macro polypropylene, macro polyethylene, and the hybrid of steel and polyvinyl alcohol were mixed with cement by a designated mix ratio to prepare a total of nine specimens of each. The bending test was conducted by following ASTM C1609 with a net deflection of 2, 4, and 7 mm. The X-ray computed tomography (XCT) was carried out for 7 mm-deflection specimens. The original XCT images were post-processed to denoise the beam-hardening effect. Then, fiber, crack, and void were semi-manually segmented. The hybrid specimen showed the highest toughness compared to the other two types. Debonding based on 2D XCT sliced images was commonly observed for all three groups. The cement matrix near the crack surface often involved partially localized breakage in conjunction with debonding. The pullout was predominant for steel fibers that were partially slipped toward the crack. Crack bridging and rupture were not found presumably due to the image resolution and the level of energy dissipation for poly-fibers, while the XCT imaging was advantageous in evaluating the distribution and behavior of various fibers upon bending for fiber-reinforced concrete beam elements.