• International Journal of Precision Engineering and Manufacturing
• /
• 제1권2호
• /
• pp.14-23
• /
• 2000

A numerical scheme is proposed to obtain the individual stress intensity factors in an axisymmetric crack and in a three dimensional mixed mode crack. The method is based on the path independence of J and M integral and mutual or two-state conservation integral , which involves two elastic fields. Some numerical example are presented to investigate the effectiveness and applicability of the method for and axisymmetric crack and a three dimensional penny shaped crack problem under mixed mode.

• Computers and Concrete
• /
• 제12권3호
• /
• pp.261-283
• /
• 2013

This paper aims to contribute to the three-dimensional generalization of numerical prediction of crack propagation through the formulation of finite elements with embedded discontinuities. The analysis of crack propagation in two-dimensional problems yields lines of discontinuity that can be tracked in a relatively simple way through the sequential construction of straight line segments oriented according to the direction of failure within each finite element in the solid. In three-dimensional analysis, the construction of the discontinuity path is more complex because it requires the creation of plane surfaces within each element, which must be continuous between the elements. In the method proposed by Chaves (2003) the crack is determined by solving a problem analogous to the heat conduction problem, established from local failure orientations, based on the stress state of the mechanical problem. To minimize the computational effort, in this paper a new strategy is proposed whereby the analysis for tracking the discontinuity path is restricted to the domain formed by some elements near the crack surface that develops along the loading process. The proposed methodology is validated by performing three-dimensional analyses of basic problems of experimental fractures and comparing their results with those reported in the literature.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권3호
• /
• pp.11-18
• /
• 2001

A simple and convenient method of analysis for obtaining the individual stress intensity factors in a three-dimensional mixed mode crack is proposed. The procedures presented here are based on the path independence of J integral and mutual or two-state conservation integral, which involves two elastic fields. The problem is reduced to the determination of mixed mode stress intensity factor solutions in terms of conservation integrals involving known auxiliary solutions. Some numerical examples are presented to investigate the effectiveness and applicability of the method for a three-dimensional penny-shaped crack problem under mixed mode. This procedure is applicable to a three-dimensional mixed mode curved crack.

• 대한기계학회논문집
• /
• 제19권1호
• /
• pp.61-78
• /
• 1995

In this study the method of analysis for three-dimensional plane crack problem by fractional linear mapping is given. Using this method we can obtain the exact solutions of significantly different configurations of the crack. In the example image crack configurations by mapping of elliptic crack are illustrated. And the stress intensity factors along the image crack tips are calculated.

• International Journal of Safety
• /
• 제2권1호
• /
• pp.17-22
• /
• 2003

In order to analyze general three dimensional cracks in an infinite body, the symmetric Galerkin boundary element method formulated by Li and Mear is used. A crack is modelled as distribution of displacement discontinuities, and the governing equation is formulated as singularity-reduced integral equations. With the proposed method several example problems for three dimensional cracks in an infinite solid, as well as their growth under fatigue, are solved and the accuracy and efficiency of the method are demonstrated.

• 대한기계학회논문집A
• /
• 제31권10호
• /
• pp.1009-1016
• /
• 2007

Finite element alternating method has been suggested and used effectively to obtain the fracture parameters in assessing the integrity of cracked structures. The method obtains the solution from alternating independently between the FEM solution for an uncracked body and the crack solution in an infinite body. In the paper, the finite element alternating method is extended in order to obtain the elastic-plastic stress fields of a three dimensional inner crack. The three dimensional crack solutions for an infinite body were obtained using symmetric Galerkin boundary element method. As an example of a three dimensional inner crack, a penny-shaped crack in a finite body was analyzed and the obtained elastc-plastic stress fields were compared with the solution obtained from the finite element analysis with fine mesh. It is noted that in the region ahead of the crack front the stress values from FEAM are close to the values from FEM. But large discrepancy between two values is observed near the crack surfaces.

• 대한토목학회논문집
• /
• 제32권1A호
• /
• pp.39-48
• /
• 2012

본 논문에서는 V형 노치 및 반원형 노치 균열을 갖는 패치보강 적층판의 응력확대계수 산정을 위하여 수치해석적 방법을 사용한다. p-수렴 비등매개변수 모델이 고려되고, 이와 같은 비등매개변수 모델의 결과를 활용한 3차원 가상균열닫힘법에 대한 식이 표현된다. 1차원 로바토 함수로부터 확장된 3차원 계층적 형상함수를 가지고서, 임의의 요소에서의 변위장의 변위-변형률 관계와 3차원 구성방정식이 표현된다. 원형경계의 기하형상을 나태내기 위해 초유한사상기법을 사용한다. 응력집중계수, 응력분포, 자유도, 그리고 무차원 응력확대계수 등의 항목에 대해서, 제안된 모델의 정확도와 단순성이 기존의 결과들과의 비교를 통해 설명된다. 균열 적층판의 폭, 높이, 노치근입부의 반경, V형 노치의 경사각, 균열길이 등의 변화에 따른 응력확대계수가 산정된다.

• 한국안전학회지
• /
• 제21권1호
• /
• pp.15-20
• /
• 2006

The finite element alternating method is a convenient and efficient method to analyze three-dimensional cracks embedded in an infinite or a finite body because the method has the property that the uncracked body and cracks can be modeled independently. In this paper the method was applied for fatigue crack growth simulation. A surface crack in a cylinder was considered as an initial crack and the crack configurations and stress intensity factors during the crack growth were obtained. In this paper the finite element alternating method proposed by Nikishkov, Park and Atluri was used after modification. In the method, as the required solution for a crack in an infinite body, the symmetric Galerkin boundary element method formulated by Li and Mear was used. And a crack was modeled as distribution of displacement discontinuities, and the governing equation was formulated as singularity-reduced integral equations.

• 대한기계학회논문집A
• /
• 제35권9호
• /
• pp.1091-1097
• /
• 2011

SGBEM-FEM 교호법은 유한 물체 내에 존재하는 삼차원 균열을 해석하는 유용한 방법으로 알려져 있다. 이 방법으로 일반적인 평면 혹은 비평면 삼차원 균열에 대한 정확한 응력강도계수를 구할 수 있다. 기존의 방법에서는 균열을 모델화 하는데 8 절점 사각형 경계요소를 사용한다. 그러나 임의 형상의 균열의 경우는 3 절점 삼각형 요소를 사용하여 균열을 모델화 하는 것이 더 편리하다. 따라서 본 논문에서는 3 절점 삼각형 요소와 7 절점 사각형 요소를 사용하여 전진 프런트 법으로 균열을 모델링 하였다. 사용된 균열 모델의 정확성을 검토하기 위하여 몇 가지 형상의 균열에 대하여 응력강도계수를 구하여 기존의 해와 비교하였다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.244-249
• /
• 2002

The purpose of this study is to develope the prediction method of liquation crack initiation in HAZ of laser weldment. Thermal two dimensional strain analyses were performed by FEM for bead-on-plate welding in order to obtain the plastic strain at elevated temperature in HAZ of the laser weldment. From these results, it became clear that the plastic strain at elevated temperature affected liquation crack initiation in HAZ, and it could be proposed that the critical strain, which controlled liquation crack initiation, existed. Moreover, an attempt was made to develop thermal and dynamic three dimensional strain analysis method for the laser weldment in order to obtain the plastic strain at elevated temperature in HAZ of the laser weldment in more detail and precisely.