• 한국산업정보학회논문지
• /
• 제6권4호
• /
• pp.54-60
• /
• 2001

본 논문에서는 B-WLL IF 시스템의 1채널 전송 시 수신부 성능 분석에 대해 연구하고자 한다. 수신부 성능 분석 항목 중, 특히 상호변조 간섭 및 수율 분석에 초점을 맞추고자 한다. 상호 변조 간섭으로 인해 제3 고조파 성분 중 하나는 원하는 신호 대역에 위치하여 시스템 성능에 안 좋은 영향을 끼치므로 상호 변조 간섭을 일으키는 제3 고조파 성분을 효율적으로 제거해야 한다. 또한 수율 분석이란 시스템을 구성하는 소자의 파라미터를 통계적으로 변화 시켰을 때 시스템 출력에 어떠한 영향을 미치는가를 관찰하는 것으로 본 논문에서는 수신부 LNA의 파라미터를 변화 시켜 시스템 출력을 관찰하였다. 또한 LNA 이득에 따른 제3 고조파 출력의 변화를 관찰함으로써 상호 변조 간섭을 줄이기 위한 LNA 이득의 조절에 관한 방안을 제시하였다.

• Bulletin of the Korean Chemical Society
• /
• 제33권11호
• /
• pp.3755-3760
• /
• 2012

Single crystals of lithium potassium phthalate (LiKP) were successfully grown from aqueous solution by solvent evaporation technique. The grown crystals were characterized by single crystal X-ray diffraction. The lithium potassium phthalate $C_{16}\;H_{12}\;K\;Li_3\;O_{11}$ belongs to triclinic system with the following unit-cell dimensions at 298(2) K;$a=7.405(5){\AA}$;$b=9.878(5){\AA}$;$c=13.396(5){\AA}$;${\alpha}=71.778(5)^{\circ}$;${\beta}=87.300(5)^{\circ}$;${\gamma}=85.405(5)^{\circ}$; having a space group P1. Mass spectrometric analysis provides the molecular weight of the compound and possible ways of fragmentations occurs in the compound. Thermal stability of the crystal was also studied by both simultaneous TGA/DTA analyses. The UV-Vis-NIR spectrum shows a good transparency in the whole of Visible and as well as in the near IR range. Third order nonlinear optical studies have also been studied by Z-scan technique. Nonlinear absorption and nonlinear refractive index were found out and the third order bulk susceptibility of compound was also estimated. The results have been discussed in detail.

• 대한원격탐사학회지
• /
• 제19권2호
• /
• pp.149-157
• /
• 2003

본 연구에서는 향후 지속적으로 제공되어질 고해상도 위성영상의 효율적인 대체 센서모델링을 위하여 SPOT-3호의 위성영상으로부터 대상영역에 영상분할을 실시하고 분할된 영상으로부터 분모항이 없는 RFM 즉, 3차 다항식 모델의 적용성을 고찰하였다. 대상영역 전체에 적용한 분모항이 있는 기존 RFM의 적합도와 비교한 결과, 평면오차는 3차 다항식 모델링 방법이 0.8m 정도 낮게 산출된 반면 표고오차는 기존의 RFM이 1.0m 정도 낮게 산출되었다.

• Steel and Composite Structures
• /
• 제39권1호
• /
• pp.1-20
• /
• 2021

An exact solution based on refined third-order theory (TOT) has been presented for functionally graded porous curved beams having deep curvature. The displacement field of the refined TOT is derived by imposing the shear free conditions at the outer and inner surfaces of curved beams. The properties of the two phase composite are tailored according the power law rule and the effective properties are computed using Mori-Tanaka homogenization scheme. The equations of motion as well as consistent boundary conditions are derived using the Hamilton's principle. The curved beam stiffness coefficients (A, B, D) are obtained numerically using six-point Gauss integration scheme without compromising the accuracy due to deepness (1 + z/R) terms. The porosity has been modeled assuming symmetric (even) as well as asymmetric (uneven) distributions across the cross section of curved beam. The programming has been performed in MATLAB and is validated with the results available in the literature as well as 2D finite element model developed in ABAQUS. The effect of inclusion of 1 + z/R terms is studied for deflection, stresses and natural frequencies for FG curved beams of different radii of curvature. Results presented in this work will be useful for comparison of future studies.

• Steel and Composite Structures
• /
• 제49권6호
• /
• pp.633-643
• /
• 2023

In this study, the natural frequencies of Functional Graded Materials (FGM) plates are predicted using Artificial Neural Network (ANN). A model based on Third-order Shear Deformation Theory (TSDT) and FEM is used to train the ANN model. Different training methods are tested to simulate input and output dependency. As this is a parametric model, several architectures and optimization algorithms were tested. The proposed model allows us to minimize the CPU time to evaluate candidate material properties for FGM plate material selection and demonstrate their influence on dynamic behavior. Consequently, the time required for the FGM design process (candidate materials for material selection) and the geometric optimization of the FGM structure would remain reasonable. The ANN model can help industries to produce FGM plates with good mechanical properties of the selected materials. I addition, this model can be used to directly predict vibration behavior by testing a large number of FGM plates, representing all possible combinations of metals and ceramics in today's industry, without having to solve any eigenvalue problems.

• 수산해양교육연구
• /
• 제27권4호
• /
• pp.912-923
• /
• 2015

In the results of analyzing Korean corrective action for what are required to be improved according to EU listing Korea as yellow-card non-cooperating third countries against IUU fishing, in order to establish advanced fishery order, it is thought that the following additional improvements are required. (1) The introduction of integrated management system of fishing vessel sailing route, fishing activity, fish catch, and inshore fishing vessel must be considered. (2) It is necessary to establish a system to cross check catch transaction, catch landing, and fish catch report submitted by fishing vessel. (3) Catch transshipment approval system shall be introduced. And a system of reporting and checking catch transshipment at sea shall be reinforced. (4) Punishment shall be strengthened to the extent of making people to perceive that loss due to punishment is larger than profit made from illegal fishing. (5) It shall be so improved that more than a certain percentage of all vessels with fish and fish products caught in waters outside Korea's judicial waters shall be arbitrarily chosen and searched besides a case of being suspected to be IUU fishing. In conclusion, on being listed by EU as yellow-card non-cooperating third countries against IUU fishing, Korean fishery management system shall be generally reexamined, and it shall serve as an occasion to exterminate IUU fishing and to advance fishery management system.

• 전력전자학회논문지
• /
• 제10권4호
• /
• pp.323-330
• /
• 2005

본 논문에서는 고정자의 제 3고조파 전압 성분을 이용하여 브러시리스 직류 전동기의 회전자 위치를 간접 검출하는 방법을 제안하였다. 3고조파 성분은 회전자의 위치 정보를 가지고 있고 이 전압을 이용하여 전환 신호(Commutation signal)를 만들어 낼 수 있다. 따라서 전환 신호를 이용하여 구형파 전류 여자 브러시리스 직류 전동기를 센서리스로 운전하는 방식은 상지연 필터가 필요하지 않고 하드웨어적으로 전류의 전환 시점이 결정되므로 센서리스 드라이브용 프로세서의 부담을 줄일 수 있을 뿐만 아니라, 역기전력 파형과 상전류가 비교적 정확한 동기를 유지할 수 있으므로 넓은 속도 범위에서 안정적인 센서리스 운전이 가능한 방법이다.

• 한국축산식품학회지
• /
• 제39권2호
• /
• pp.222-228
• /
• 2019

This research was motivated by our encounter with the situation where an optimization was done based on statistically non-significant models having poor fits. Such a situation took place in a research to optimize manufacturing conditions for improving storage stability of coffee-supplemented milk beverage by using response surface methodology, where two responses are $Y_1$=particle size and $Y_2$=zeta-potential, two factors are $F_1$=speed of primary homogenization (rpm) and $F_2$=concentration of emulsifier (%), and the optimization objective is to simultaneously minimize $Y_1$ and maximize $Y_2$. For response surface analysis, practically, the second-order polynomial model is almost solely used. But, there exists the cases in which the second-order model fails to provide a good fit, to which remedies are seldom known to researchers. Thus, as an alternative to a failed second-order model, we present the heterogeneous third-order model, which can be used when the experimental plan is a two-factor central composite design having -1, 0, and 1 as the coded levels of factors. And, for multi-response optimization, we suggest a modified desirability function technique. Using these two methods, we have obtained statistical models with improved fits and multi-response optimization results with the predictions better than those in the previous research. Our predicted optimum combination of conditions is ($F_1$, $F_2$)=(5,000, 0.295), which is different from the previous combination. This research is expected to help improve the quality of response surface analysis in experimental sciences including food science of animal resources.

• 통상정보연구
• /
• 제11권1호
• /
• pp.117-137
• /
• 2009

Although the third-party logistics are activated and researched in many ways in the advanced countries, China is still on the beginning phase of the third-party logistics and has announced few studies on them. Especially, the study on factors affecting formation for partnership between shippers and third-party logistics providers has never been announced in China, and few empirical studies on them have been done. In order to verify established hypothesis, the empirical analysis is conducted as follows. Totally 500 copies of questionnaire were drawn up and distributed. Amid them 160 copies were collected, finally 155 copies were used for this study as valid samples. The questionnaire used nominal scale and 5 Likert scale. Statistics of collected data were under the data coding process, and analyzed by applying SEM program.

• 대한예방한의학회지
• /
• 제5권1호
• /
• pp.10-30
• /
• 2001

Oriental medicine needs to be armed with theories on health-improvement concept under it and basic data matching its views, in order to participate in the health-improvement service in industrial work places. The Orient medicine health-improvement program defines factors that determine individuals' lifestyle, and provides information and technologies for workers to practice in life. To that end, this research compares and analyzes health-improvement concept and health care, defines relations between individuals' health state and their lifestyle as the basic data needed to perform health-improvement business for workers. 1. The subjects employed for this research is categorized into; by gender, males 52.1% and females 47.9% with no big difference between them; and by age, 20s, 6.1%, 30s. 33.9%, 40s, 34.1%, and 50s, 24.8% with 30-50 accounting for most of it. By marriage status, unmarried represents 7.1%, and married 79.1% with most of them married; by revenue, under one million won represents 3.0%, 1-2 million won 26.4%, 2-2.49 million won 11.2%, above 2.5 million won 11.2%, and 1-2.5 million won a majority. By living location, owned houses represents 65.4%, rented houses 14.7%, monthly-rented 9.5%; and by education, elementary and middle school represent 16.9%, high school and its dropouts 22.6%, and junior college and higher 51.6%, with high school and higher occupying most of the group. 2. By job, office workers and managerial workers represent 12.3%, part-timers 21.0%, manual workers 11.4%, jobless 0.6%, professionals 35.6%, service 0.6%, housewives 8.4%, and equipment/machinery operation/assemblers 10.1%. Of this, jobless and part-timers, totaling three, are dropped from this research. By years worked, 0-3.9 years represents 9.7%, 4-7.9 years 6.7%, 8-14.9 years 18.4%, above 15 years 28.7%, and no respondents 36.5%. 3. The degree of the subjects practicing life-improvement lifestyle, on a scale of 1 to 4, is an average of 2.69, personal relations 3.04, self-realization 2.92, stress management 2.76, nutritional state 2.73, responsibility for health 2.47, and athletic activities 2.18, with personal relations earning the highest points and athletic activities the lowest. As for factors influencing health-improvement lifestyle, there is no significant difference between gender, age, and marriage status. Meanwhile, there is significant difference between revenue, dwelling pattern, education level, etc. That is, higher income-bracket, owned houses, rented houses, monthly-rented houses, and higher-educated, in this order, show higher average in health-enhancement lifestyle. By job, housewives, manual workers, office workers, professionals, equipment/ machinery operation/ assemblers, and part-timers, in this order show higher points, while there is no difference with significance by years worked. 4. Factors that affect health-improvement lifestyle are shown below. Self-realization is influenced by age, marriage status, type of dwellings, and level of education; responsibility for health by type of dwellings; athletic activities by gender and age; nutrition by age, marriage status and type of dwellings; personal relations by marriage status; and stress management by type of dwellings. 5. Areas with high points by job show this: in self-realization, office workers, manual workers, housewives, professionals, equipment/ machinery operation/ assemblers, in this order, show difference with significance; in the area of responsibility for health, manual workers, housewives, equipment/ machinery operation/ assemblers, professionals, office workers and part-timers, in this order, do. In athletic activities, manual workers, housewives, office workers, professionals, equipment/ machinery operation/ assemblers, and part-timers, in this order, show difference with significance; in nutrition, housewives, office workers, manual workers, professionals, equipment/ machinery operation/ assemblers, and part-timers, in this order do; and in stress, housewives, office workers, manual workers, professionals, equipment/ machinery operation/ assemblers, part-timers, in this order do. By years worked, more years showed higher points in the area of responsibility for health and nutrition; in the area of athletic activities, above 15 years, 4-8 years, below 4 years and 8-14 years, in this order, show higher points; and no difference shows in realization, personal relation, and stress area. 6. To look at correlation between overall and divisional health-improvement practice degree, this researcher has analyzed it using Person's correlation coefficient. Self-realization, responsibility for health, athletic activities, nutrition, support for personal relations, and stress management show significant correlation with the sub-divisions, while all health-improvement lifestyle shows significant correlation with the six sub-divisions.