• Journal of the Korean Society for Railway
• /
• v.13 no.2
• /
• pp.152-158
• /
• 2010

Generally, the AC electrified railway systems have the power quality problems that are induced from the harmonic currents and the reactive power. This paper presents a single-phase hybrid active filter adopting a SRF(synchronous-reference-frame) control for improving power quality in the AC electrified railway systems. The single-phase hybrid active filter can compensate the harmonic currents and the reactive power through the proposed SRF control algorithm. The proposed control algorithm can extract the third and fifth harmonics through the MSRF(multiple-synchronous-reference-frames) which is used to apply the three-phase systems. Therefore, the hybrid active filter can compensates only the high-frequency harmonic currents whereas the passive filter compensates the low-frequency harmonic currents. Also, the proposed SRF control algorithm can compensate the reactive power by the closed-loop control. The Validity and the effectiveness of the proposed SRF control method for the hybrid active filter are illustrated through the simulation results.

• Journal of Advanced Navigation Technology
• /
• v.10 no.1
• /
• pp.41-47
• /
• 2006

In this paper, a predistortion linearizer using the in-phase modulator is proposed. The harmonic generator of the proposed predistorter extracts a second harmonic signals. These signals are divided in-phase and quadrature-phase signals, and then amplifying each signals using variable gain amplifier. An in-phase modulator, modulate fundamental signal with second harmonic signals, generates the predistortion intermodulation distortion (IM) signals and controls amplitude and phase of them with modulation factors. As a result, this predistorter is suppressed intermodulation distortion signals of power amplifier effectively. The proposed linearizer has been implemented to operate in Cellular-band. The test results show that the third order IM is cancelled more than 20dB in case of CW 2-tone signals with ${\Delta}f$=1MHz. Also, it's improved the adjacent channel power ratio (ACPR) more than 7dB for IS-95 CDMA 1FA signals.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.12
• /
• pp.7-12
• /
• 2008

In this paper, a highly efficiency power amplifier is presented for multi-band antenna system. The class F power amplifier operating in dual-band designed with one LDMOSFET. An operating frequency of power amplifier is 900 MHz and 2.14 GHz respectively Matching networks and harmonic control circuits of amplifier are designed by using the unit cell of composite right/left-handed(CRLH) transmission line(TL) realized with lumped elements. The CRLH TL can lead to metamaterial transmission line with the dual-band holing capability. The dual-band operation of the CRLH TL is achieved by the frequency offset and the nonlinear phase slope of the CRLH TL for the matching network of the power amplifier. Because the control of all harmonic components for high efficiency is very difficult, we have controled only the second- and third-harmonics to obtain the high efficiency with the CRLH TL. Also, the proposed power amplifier has been realized by using the harmonic control circuit for not only the output matching network, but also the input matching network for better efficiency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.10A
• /
• pp.847-852
• /
• 2003

Apertures and PBG(Photonic Band Gap) has been employed on the ground plane in the coupled line filter simultaneously. In order to observe the maximum bandwidth, we used the line gap 0.2mm which is can be made in our lab. Band-pass filter type is four-stage coupled strip line filter. Teflon has been used for the substrate ($\varepsilon$$\sub$r/=3.2). The center frequency and the bandwidth are 2.18GHz and 230MHz, respectively. The bandwidth is broaden from 230MHz to 310MHz (80Mhz, about 34.7%) by aperture effect and harmonic frequencies are suppressed to 20-30dB by PBG effect. So the harmonic frequencies have been suppressed by the PBG effect and the bandwidth are broaden by aperture effect.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1366-1368
• /
• 2001

In this study it can be confirmed that the formula by the free-rotational dipole theory is similiar with that by the phenomenological theory and the non-linear permittivity is determined only with the third harmonic conponent of polarization. Various parameters of VDCN copolymers were obtained from fitting results with the related formula.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.44-45
• /
• 2000

GHz 급의 아주 높은 반복율을 가지면서, 피코초 단위의 펄스 열을 발진시키는 레이저를 만들기 위해 능동형 모드록킹 방법을 이용하였다. 이 방법은 공진기안에 광 변조기를 삽입하고, RF 신호를 가하여 시간적으로 공진기내에서의 손실을 변화시키는 방법이다.$^{(1)}$ 공진기 길이를 충분히 길게 하면서도 고 반복율을 가지는 레이저를 만들기 위해 조화 모드록킹 방법을 사용했는데, 이는 레이저 펄스의 반복율을 공진기 길이에 의한 기본 반복율의 정수배가 되도록 하는 방법이다.$^{(2),(3)}$ 3차 조화 모드록킹 방법을 이용한 Nd:YLF 레이저 시스템을 그림 1에서 나타내었다. (중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.304-305
• /
• 2003

파장 355 nm인 Nd：YAG 레이저의 3차 고조파 자외선 레이저빔을 이용하여 색소첨가 폴리이미드 필름을 광배향시키고 이것을 사용하여 액정셀을 제작하였다. 광배향으로 제작된 액정셀의 특성을 알아보기 위하여 정렬성, 광투과곡선, 응답시간 둥을 측정하여 러빙에 의한 액정셀과 비교하였다. 그 결과 광배향 액정셀은 러빙에 의한 액정셀에 비하여 정렬성, 선경사각, 광투과도 등의 특성은 떨어지나 낮은 문턱전압과 빠른 응답시간 특성을 가진 것으로 나타났다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.224-225
• /
• 2001

3차 비선형 광학 현상을 이용한 파장변환에 대한 연구는 1960년대 초 비선형 광학 연구가 시작된 이래 최근까지 연구자들로부터 큰 관심을 끌지 못하였다. 1963년 Terhune 등이 방해석을 이용한 3차 조화파 발생의 첫 연구결과를 보고하였으나, 일반적으로 직접적인 3차 파장변환 효율은 2차의 경우에 비해 현저히 낮기 때문에, 2차 파장변환 과정을 두 번 이용하여 3차에 해당하는 파장변환을 얻는 방법이 널리 활용되어 왔다. (중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 2006.07a
• /
• pp.217-218
• /
• 2006

• Proceedings of the Korean Magnestics Society Conference
• /
• 2005.12a
• /
• pp.94-96
• /
• 2005

포항방사광가속기의 전자빔수명을 연장하기 위한 3차 하모닉 초전도 RF 공동기를 개발하고 있다. 저장링 빔물리 계산에 따르면 3차 하모닉 초전도 RF 공동기를 설치할 경우 점자빔의 수명이 약2.3배 증가하는 것으로 나타났다. 또 이 공동기를 설치할 경우 란다우 (Landau) 감쇄 (damping)에 의한 빔의 안정화도 개선되는 효과가 있다. 본 논문은 이것을 실현하기 위한 초전도 RF 공동기의 전자기장 분포와 고차원 전자장 계산을 통하여 최적의 공동기의 모양 결정과 설계 특성에 대한 것을 보고 하고자 한다.