• The Korean Journal of Physiology and Pharmacology
• /
• v.23 no.1
• /
• pp.47-54
• /
• 2019

Estrogen withdrawal in post-menopausal women leads to overactivation of osteoclasts, which contributes to the development of osteoporosis. Inflammatory cytokines are known as one of mechanisms of osteoclast activation after estrogen deficiency. SPA0355 is a thiourea derivative that has been investigated for its antioxidant and anti-inflammatory activities. However, its efficacy in bone resorption has not been previously investigated. The aim of this study was to investigate the impact of SPA0355 on the development of osteoporosis and to explore its mode of action. In vitro experiments showed that SPA0355 inhibited receptor activator of $NF-{\kappa}B$ ligand (RANKL)-induced osteoclastogenesis in primary bone marrow-derived macrophages. This effect appears to be independent of estrogen receptor activation as ICI 180,782 failed to abrogate its effects on osteoclasts. Further signaling studies revealed that SPA0355 suppressed activation of the MAPKs, Akt, and $NF-{\kappa}B$ pathways. SPA0355 also increased osteoblastic differentiation, as evidenced by its effects on alkaline phosphatase activity and mineralization nodule formation. Intraperitoneal administration of SPA0355 to ovariectomized mice prevented bone loss, as verified by three-dimensional images and bone morphometric parameters derived from ${\mu}CT$ analysis. Noticeably, SPA0355 did not show hepatotoxicity and nephrotoxicity and also had little effect on hematological parameters. Taken together, the results indicate that SPA0355 may protect against bone loss in ovariectomized mice by stimulation of osteoblast differentiation and by inhibition of osteoclast resorption. Therefore, SPA0355 is a safe and potential candidate for management of postmenopausal osteoporosis.

• Nuclear Engineering and Technology
• /
• v.54 no.10
• /
• pp.3641-3649
• /
• 2022

A simple solvothermal reaction was used to prepare a 3-aminopropyl-functionalized silica-gel-based adsorbent for adsorbing Pd(II) from the nitric acid solution. Scanning electron microscopy, fourier transform infrared spectroscopy, and thermogravimetry analysis were performed on the as-synthesized adsorbent to demonstrate the successful introduction of Schiff base groups. Batch experiments were used to investigate the effects of contact time, nitric acid concentration, solution temperature, and adsorption capacity. It is worth noting that the prepared adsorbent exhibited a higher affinity toward Pd(II) with the uptake approximately 100% even in a 2 M HNO₃ solution. At an equilibrium time of 5 h, the maximum adsorption capacity of Pd(II) was estimated to be 0.452 mmol/g. The adsorbed Pd(II) could be completely eluted by dissolving 0.2 M thiourea solution in 0.1 M HNO₃. Using a combination of particle-induced X-ray emission analysis and an X-ray photoelectron spectrometer, the adsorbed Pd was found to be uniformly distributed on the surface of the prepared adsorbent and the existing species were Pd(II) and zero-valent Pd(0). Due to the desirable performances, facile preparation method, and abundant raw material source, the prepared adsorbent demonstrated a high application potential in the recovery of Pd(II) from simulated high-level liquid waste treatment.

• Nuclear Engineering and Technology
• /
• v.56 no.3
• /
• pp.812-818
• /
• 2024

The volume and toxicity of radioactive waste can be decreased by separating the components of high-level liquid waste according to their properties. An impregnated silica-based adsorbent was prepared in this study by combining N,N,N',N',N",N"-hexa-n-octylnitrilotriacetamide (HONTA) extractant, N',N'-di-n-hexyl-thiodiglycolamide (Crea) extractant, and macroporous silica polymer composite particles (SiO₂-P). The performance of platinum-group metals adsorption and separation on prepared (HONTA + Crea)/SiO₂-P adsorbent was then assessed together with that of co-existing metal ions by batch-adsorption and chromatographic separation studies. From the batch-adsorption experiment results, (HONTA + Crea)/SiO₂-P adsorbent showed high adsorption performance of Pd(II) owing to an affinity between Pd(II) and Crea extractant based on the Hard and Soft Acids and Bases theory. Additionally, significant adsorption performance was observed toward Zr(IV) and Mo(VI). Compared with studies using the Crea extractant, the high adsorption performance of Zr(IV) and Mo(VI) is attributed to the HONTA extractant. As revealed from the chromatographic experiment results, most of Pd(II) was recovered from the feed solution using 0.2 M thiourea in 0.1 M HNO₃. Additionally, the possibility of recovery of Zr(IV), Mo(VI), and Re(VII) was observed using the (HONTA + Crea)/SiO₂-P adsorbent.

• Journal of Korean Society of Transportation
• /
• v.23 no.7 s.85
• /
• pp.165-179
• /
• 2005

The object of this study is a development of a stochastic user equilibrium transit assignment algorithm for multiple user classes considering stochastic characteristics and heterogeneous attributes of passengers. The existing transit assignment algorithms have limits to attain realistic results because they assume a characteristic of passengers to be equal. Although one group with transit information and the other group without it have different trip patterns, the past studies could not explain the differences. For overcoming the problems, we use following methods. First, we apply a stochastic transit assignment model to obtain the difference of the perceived travel cost between passengers and apply a multiple user class assignment model to obtain the heterogeneous qualify of groups to get realistic results. Second, we assume that person trips have influence on the travel cost function in the development of model. Third, we use a C-logit model for solving IIA(independence of irrelevant alternatives) problems. According to repetition assigned trips and equivalent path cost have difference by each group and each path. The result comes close to stochastic user equilibrium and converging speed is very fast. The algorithm of this study is expected to make good use of evaluation tools in the transit policies by applying heterogeneous attributes and OD data.

• Korean Journal of Environmental Biology
• /
• v.18 no.3
• /
• pp.331-336
• /
• 2000

In order to examine the effect of SO$_2$, which is the major component of acid rain, on the peroxidase activity, rice (Oryza sativa) seedlings were grown on the media containing various concentrations of Na$_2$SO$_3$. Na$_2$SO$_3$ concentrations needed for the 50% inhibition of rice seed germination were determined to be 300$\mu\textrm{g}$/ml at pH 7, 8$\mu\textrm{g}$/ml at pH 5 and 2$\mu\textrm{g}$/ml at pH 3. Notably, about 8 fold and 4 fold increase of the specific activity of the enzyme were observed with the seedlings treated with 8$\mu\textrm{g}$/ml Na$_2$SO$_3$ at pH 5 and 2$\mu\textrm{g}$/ml Na$_2$SO$_3$ at pH 3, respectively. The effects of Cd and Pb on the peroxidase activities and chlorophyll contents were also examined. About 3.9 fold higher peroxidase activities were found at 0.03mM Cd, and the chlorophyll contents were reduced to 63% of the control seedlings. At 0.04mM Pb, 2.5 fold higher enzyme activities were found and the chlorophyll contents were reduced to 72%. Therefore, the increases of rice peroxidase activities might be involved in the defense mechanism of the cell against various environmental stresses such as Na$_2$SO$_3$, Cd and Pb. The effects of Cu and Fe, which are the inducers of oxidative stresses by the generations of reactive oxygen species, on the peroxidase activities were also investigated. About 57% and 65% activity losses were found at 0.5mM CuSO$_4$ and 0.5mM FeSO$_4$, respectively, and radical scavenger ethanol almost completely protected both inactivations. However, dimethyl sulfoxide, mannitol, thiourea and histidine showed different radical scavenging effects one another against Cu and Fe inactivation.

• Current Research on Agriculture and Life Sciences
• /
• v.4
• /
• pp.55-64
• /
• 1986

Polyphenol oxidase in japanese pear (Pyrus communis var. mansamkil) was isolated, partially purified and its some properties were investigated. Polyacrylamide disc gel electrophoresis indicated two bands with polyphenol oxidase activity in the extract from acetone dry powder of par flesh. These two polyphenol oxidases (PPO A and PPO B) were purified through acetone precipitation and diethylaminoethyl cellulose column chromatography. PPO A and B were purified 7.8 fold and 8.7 fold by the present procedure, respectively. The Rm values of partially purified PPO A and B were estimated to be 0.58 and 0.68, respectively. The optimum temp, and pH of PPO A activity were $33^{\circ}C$ and pH 7.0, while those of PPO B were $30^{\circ}C$ and pH 4.2, respectively. Two PPO were unstable over the temperature of $60^{\circ}C$. The substrate specificity of pear PPO showed high affinity toward o-diphenolic compounds, especially catechol in PPO A and chlorogenic acid in PPO B, but inactive toward m-diphenol, p-diphenol and monophenols. PPO A showed affinity toward the trihydroxyphenolic compound. $Zn^{{+}{+}}$ activated the PPO A activity but $Fe^{{+}{+}}$ inhibited PPO B activity, while $Fe^{{+}{+}}$ and $Zn^{{+}{+}}$ activated the PPO B activity, while $Fe^{{+}{+}}$ and $Zn^{{+}{+}}$ activated the PPO B activity but $K^+$, $Mg^{{+}{+}}$, $Ca^{{+}{+}}$ and $Hg^{{+}{+}}$ inhibited at 10mM concentration. $Cu^{{+}{+}}$ activated the enzyme action at low concentrations but inhibited at high concentration. Inhibition studies indicated that L-ascorbic acid, L-cysteine and thiourea were most potent. The Km values of PPO A and PPO B for catechol were 20mM and 14.3mM, respectively.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.18 no.4
• /
• pp.73-85
• /
• 1991

Rhododendron mucronulatum for. albiflorum, native species is a shrub that has white flowers on May to June, and rare species endangered by people's rash digging or cutting. But its physiological ecological characteristics and propagation method are not being known at all. Therefore, this study was executed to utilize this species as the planting material for landscaping by analysing its habitat environment and growth form, and also experimenting its seed and vegetative propagation, and it field culture and utilization. The results are as follows; 1. The elevation, gradient and direction of this species were 295-1,350m, 10-36$^{\circ}$, northwest respectively. It was found that the species is shade-liking plant that grows under forest cover of average 51.33%. 2. The soil pH and water content of its habitat were 5.4, 25.41% respectively. The organic matter content was 6.29% that was higher than 3.2%, the average organic matter content of forest soil in Korea. 3. Representative plant community within which this species was living was Quercus mongolica community, and its main neighboring species were Lindea obtusiloba, Fraxinus sieboldiana, Rhus trichocarpa, Rhododendron Schlippenbachii, Rododendron mucronulatum. 4. The leaf length and width of this species were 39.18mm, 12.60mm respectively. This result showed that generally its leaf size was larger than that of R. micranthum, R. yedoense var. poukhanense and R. mucronulatum var. ciliatum and smaller than that of R. mucronulatum and R. schlippenbachii. 5. The whole size of its pollen was, as 59${\times}$61$\mu\textrm{m}$, the largest of plants of Rhododendron family including R. mucronulatum and R. mucronulatum var. ciliatum. 6. The result of seed germination experiment at intervals of 5$^{\circ}C$ from 15$^{\circ}C$ to 30$^{\circ}C$ presented the highest germination rate of 94.7% at 20$^{\circ}C$ numerically, but high percent germination at all temperature levels without significant difference. And the seed of this plant proved to be sun-liking seed at requiring dormancy in germination. 7. Through seed germination experiment by treatment of growth regulators such as GA. Thiourea and Kinetin under dark condition, it was found that the effect of GA treatment on germination increase and acceleration was the highest. 8. In greenwood cutting, rooted rate by treatment of various concentration of IBA and NAA on clay and vermiculite bed was not wholly high, but 100ppm plots of both IBA and NAA of clay bed showed relatively good rooted rate. 9. As result of field culture experiment for finding out optimum growth temperature and light intensity, growth conditions such as height, number of leaves, fresh weight and chlorophyll contents were the best at night/day temperature of 20/25$^{\circ}C$ and under 1/2sun. Also, the photosynthetic rate was the highest at 25$^{\circ}C$. Accordingly, it was found that optimum temperature and light intensity for growth of this plant are 25$^{\circ}C$ (day temperature), 50% of natural light respectively.

• Journal of the Microelectronics and Packaging Society
• /
• v.18 no.1
• /
• pp.29-33
• /
• 2011

The current density in copper electroplating is directly related with the productivity and then to increase the productivity, the increase in current density is required. To obtain the high mass flow rate, rotating disk electrode(RDE) was employed. High rotational speed in RDE can increase the mass flow rate and then high speed electroplating was possible using RDE to control mass flow. Two types of cathode were used. One is RDE and another is rotating cylindrical electrode(RCE). A constant-current, constant-voltage and linear sweep voltammetry were applied to investigate current and voltage relationship. The maximum current density without evolution of hydrogen gas was increased with rotational speed. Over 400 rpm, maximum current density was higher than 1000 A/$m^2$. The diffusion coefficients of copper calculated from the slope of the plots are $5.5{\times}10^6\;cm^2\;s^{-1}$ at $25^{\circ}C$ and $10.5{\times}10^6\;cm^2\;s^{-1}$ at $62^{\circ}C$. The stable voltage without evolution of hydrogen gas was -0.05 V(vs Ag/AgCl). Additives were added to prevent dendritic growth on cathode deposits. The surface roughness was analyzed with UV-Vis Spectrophotometer. The reflectance of the copper surface over 600 nm was measured and was related with the surface roughness. As the surface roughness improved, the reflectance was also increased.

• BMB Reports
• /
• v.31 no.2
• /
• pp.161-169
• /
• 1998

TThe reactive oxygen species oxidatively modify the biological macromolecules, including proteins, lipids, and nucleic acids. Iron- and heme-mediated Fenton-like reactions produce different pro-oxidants. However, these reactive products have not been clearly characterized. We examined the nature of the oxidizing species from the different iron sources by measuring oxidative protein modification and spectroscopic study. Hemoglobin (Hb) and methemoglobin (metHb) were oxidatively modified in $O{\array-\\\dot{2}}$ and $H_{2}O_{2}$ generating systems. Globin and bovine serum albumin (BSA) were also modified by iron, iron-EDTA, hematin, and Hb in an $O{\array-\\\dot{2}}$ generating system. In a $H_{2}O_{2}$ generating system, the iron- and iron-EDTA-mediated protein modifications were markedly reduced while the Hb-and hematin-mediated modifications were slightly increased. In the $O{\array-\\\dot{2}}$ generating system, the iron- and iron-EDTA-mediated protein modifications were strongly inhibited by superoxide dismutase (SOD) or catalase, but heme- and Hb-mediated protein modifications were inhibited only by catalase and slightly increased by SOD. Mannitol, 5,5-dimethyl-l-pyrroline-N-oxide (DMPO), deoxyribose, and thiourea inhibited the iron-EDTA-mediated protein modification. Mannitol and DMPO, however, did not exhibit significant inhibition in the hematin-mediated modification. Desferrioxamine (DFO) inhibited protein modification mediated by iron, but cyanide and azide did not, while the hematin-mediated protein modification was inhibited by cyanide and azide, but not significantly by DFO. The protein-modified products by iron and heme were different. ESR and UV-visible spectroscopy detected the DMPO spin adduct of the hydroxyl radical and ferryl ion generated from iron-EDTA and metHb, respectively. These results led us to conclude that the main oxidizing species are hydroxyl radical in the iron-EDTA type and the ferry I ion in the hematin type, the latter being more effective for protein modification.

• Polymer(Korea)
• /
• v.27 no.5
• /
• pp.470-476
• /
• 2003

In order to obtain high refractive plastic materials, 1,2 -ethylenedisulfanylbis(2-mercaptomethyl-1-ethanthiol) (ESTT) was newly prepared in good yield by the reaction of 1,2-ethylenedisulfanylbis(2-bromomethyl-1-ethanthiol) (ESTB) with thiourea followed by hydrolysis using an aqueous ammonia solution and characterized by $^1$H-NMR (-SH at 1.7 ppm), $\^$13/C-NMR(-CH$_2$SH at 28.4 ppm) and FT-IR (-SH at 2540 cm$\^$-1/) spectroscopy, etc. Polythiourethanes (PTU) were obtained from the combinations of ESTT with each of 4,4＇-methylenebis(phenylisocyanate) (MDI), tolyene 2,4-diisocyanate (TDI), isophorone diisocyanate (IPDI), mxylene diisocyanate (XDI), and 1,6-diisocyanatohexane (HMDI) in the presence of dibutyltin dilaurylate as a catalyst, in a casting mold, and characterized by FT-IR (existence of N=C=O) spectroscopy and elemental analyzer (sulfur content). Accordingly, their thermal, mechanical and optical properties were investigated by using DSC, TGA, hardness tester and refractometer: both the melting point on DSC and crystallinity on X -ray diffraction (XRD) for specimens of PTUs were not observed. PTUs with T$\_$g/s above 110 $^{\circ}C$ showed good hardness (Shore D) in the range of 86 to 89. Thermal stabilities of PTUs obtained by using ESTT and each of diisocyanates containing aromatic rings were especially good. Also, the optical transmittances of amorphous PTUs through UV-visible source in the range of 400 to 600 nm were good. PTUs showed refractive indexes above 1.60, and their refractive indexes gradually increased with increase of sulfur contents.