• 제목/요약/키워드: Thiogallate

검색결과 6건 처리시간 0.016초

Luminescent properties of magnesium thiogallate phosphor with green emission for LEDs

  • Kim, Kyung-Nam;Kim, Jae-Myung;Choi, Kyoung-Jae;Park, Joung-Kyu;Kim, Chang-Hae
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
    • /
    • pp.1331-1333
    • /
    • 2005
  • A magnesium thiogallate phosphor doped with europium was prepared by solid-state method. This phosphor has green emission near 535 nm due to the allowed transition from $4f^65d$ at an excitation state $(T_{2g})$ to $4f^7 (^8S_{7/2}) at a ground state of $Eu^{2+}$ ion. This phosphor shows a wide excitation spectrum from ultra violet (300 nm) to bluish green (515 nm).

  • PDF

Synthesis of the sulfide phosphors and white light generation based on InGaN chip

  • Kim, Kyung-Nam;Kim, Jae-Myung;Choi, Kyoung-Jae;Park, Joung-Kyu;Kim, Chang-Hae
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
    • /
    • pp.679-682
    • /
    • 2004
  • $SrGa_2S_4$:Eu green phosphor and SrS:Eu red phosphor have been synthesized by co-precipitation method, respectively. Two sulfide phosphors were influenced by oxygen defect in host materials. Excitation spectra of these phosphors have high efficiency at the long wavelength region. And emission efficiency is increased under the excitation wavelength of 465nm. The combination of thiogallate green phosphor and sulfide red phosphor based on blue light InGaN chip has made it possible to emit white light.

  • PDF

Synthesis of the $CaGa_2S_4:Eu^{2+}$ phosphors and Application in White LEDs

  • Kim, Jae-Myung;Kim, Kyung-Nam;Park, Joung-Kyu;Kim, Chang-Hae;Jang, Ho-Gyeom
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
    • /
    • pp.1623-1626
    • /
    • 2005
  • The thiogallate phosphors which are well known for a long time as phosphor materials for CRT or EL device were reported. Those have high luminescent properties at long-wavelength region. Among those phosphors, the samples with divalent europium doped CaGa2S4 were prepared by a simple process under the reduction atmosphere $(5%\;H_2/\;95%\;N_2)$ without toxic gas such as H2S or CS2. The prepared phosphor shows a higher luminescent efficiency (about 120%) than that of $YAG:Ce^{3+}$ phosphor. Consequently, this phosphor is possible to be applicable to white LED lamp because of the high luminescent efficiency.

  • PDF

LED용 Sr2Ga2S5:Eu2+ 황색 형광체의 합성 및 발광특성 (Synthesis and Luminescent Characteristics of Sr2Ga2S5:Eu2+ Yellow Phosphor for LEDs)

  • 김재명;박정규;김경남;이승재;김창해;장호겸
    • 대한화학회지
    • /
    • 제50권3호
    • /
    • pp.237-242
    • /
    • 2006
  • LED는 고휘도 청색 칩의 개발로 인해 단순표시소자로만 이용되던 것이 다양한 분야의 발광소자로 적용되기 시작하였다. 특히, 최근에 InGaN 칩과 황색 형광체(YAG:Ce3+)를 이용한 방법이 많이 연구되어지고 있다. 하지만 이 방법은 2 파장을 이용한 것으로 색연지수가 낮은 단점을 지니며, 황색의 YAG:Ce3+ 형광체 이외에 450~470 nm의 여기 영역에서 효율적으로 발광하는 형광체가 거의 없다. 따라서 본 연구에서는 장파장 영역의 여기 특징을 지닌 thiogallate 형광체의 합성을 시도하였다. 그 중에 가장 잘 알려진 SrGa2S4:Eu2+ 형광체의 모체를 변화시켜 Sr2Ga2S5:Eu2+ 형광체를 합성하였으며, 발광특성을 조사하였다. 그리고 무해성과 제조 공정의 단순화를 위하여, 황화물질과 5 % H2/95 % N2 혼합 기체를 CS2와 H2S 가스 대신에 사용하였다. 이렇게 합성되어진 형광체는 550 nm의 발광 중심을 가지는 황색 형광체로서 300~500 nm에 이르는 넓은 여기원을 통한 발광이 가능하다. 그리고 YAG:Ce3+ 형광체와 비교해 볼 때 강도 면에서 110 % 이상을 보이며, UV 영역의 여기적 특성을 이용해 UV LED에도 응용이 가능하다.

Highly Luminescent (Zn0.6Sr0.3Mg0.1)2Ga2S5:Eu2+ Green Phosphors for a White Light-Emitting Diode

  • Jeong, Yong-Kwang;Cho, Dong-Hee;Kim, Kwang-Bok;Kang, Jun-Gill
    • Bulletin of the Korean Chemical Society
    • /
    • 제33권8호
    • /
    • pp.2523-2528
    • /
    • 2012
  • Green phosphors $(Zn_{1-a-b}M_aM^{\prime}_b)_xGa_yS_{x+3y/2}:Eu^{2+}$ (M, M' = alkali earth ions) with x = 2 and y = 2-5 were prepared, starting from ZnO, MgO, $SrCO_3$, $Ga_2O_3$, $Eu_2O_3$, and S with a flux $NH_4F$ using a conventional solidstate reaction. A phosphor with the composition of $(Zn_{0.6}Sr_{0.3}Mg_{0.1})_2Ga_2S_5:Eu^{2+}$ produced the strongest luminescence at a 460-nm excitation. The observed XRD patterns indicated that the optimized phosphor consisted of two components: zinc thiogallate and zinc sulfide. The characteristic green luminescence of the $ZnS:Eu^{2+}$ component on excitation at 460 nm was attributed to the donor-acceptor ($D_{ZnGa_2S_4}-A_{ZnS}$) recombination in the hybrid boundary. The optimized green phosphor converted 17.9% of the absorbed blue light into luminescence. For the fabrication of light-emitting diode (LED), the optimized phosphor was coated with MgO using magnesium nitrate to overcome their weakness against moisture. The MgO-coated green phosphor was fabricated with a blue GaN LED, and the chromaticity index of the phosphor-cast LED (pc-LED) was investigated as a function of the wt % of the optimized phosphor. White LEDs were fabricated by pasting the optimized green (G) and the red (R) phosphors, and the commercial yellow (Y) phosphor on the blue chips. The three-band pc-WLED resulted in improved color rendering index (CRI) and corrected color temperature (CCT), compared with those of the two-band pc-WLED.