• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.153-156
• /
• 2008

Comparative analysis of forest fire danger rating on the forest characteristics of thinning area and non-thinning area on forest fire burnt area was studied in this work. To investigate the effect of thinning slash in forest fire, Gangneung-si Wangsan-myeon, Ulgin-gun Wonnam-Myeon, Samchok-si Gagok-Myeon, in which forest fire broke out, were selected. As a result that investigated forest fire danger ratio between thinning slash and non-thinning slash, leeward scorching ratio(36%), crown damage ratio(29%), mortality of branch at the former are higher than those at the latter, leeward scorching ratio of tree, where thinning slash is around, is 10%-20% higher than that of independent tree. So I estimate that thinning slash has a some effect on the intensity of forest fire. And the result to investigate damage of forest fire according to tree species shows that leeward scorching ratio of conifer is 5% higher than that of non-conifer, and mortality of branch of the former is 19% higher than that of the latter. It is considered that forest fire may affect directly to a tree trunk if it diffuse to piled thinning tree because there was no space between thinning trees and trees. Furthermore, it was found that re-ignition had a chance to occur due to lots of piled thinning trees.

• 한국화재소방학회논문지
• /
• 제23권4호
• /
• pp.32-39
• /
• 2009

본 연구는 산불적지에서 숲 가꾸기 실행 유무와 산불위험성과의 관계를 비교 분석하기 위하여 2007년에 산불이 발생했던 강원도 강릉시, 삼척시 및 경북 울진지역에 총18개소의 세부조사구를 선정하여 숲 가꾸기 실행 유무, 피해수종, 산불진행방향, DBH, 총수고, 지하고, 임목고사여부, 편면연소율, 수관피해율, 임목밀도, 지하고, 숲 가꾸기 산물의 방치유무, 조사지의 위치(GPS), 해발고도, 조사사면의 방위, 산지경사, 지형을 각각 조사하였다. 조사결과, 숲 가꾸기 실행지의 편면연소율은 24.7%인 반면, 미실행지의 편면연소율은 60.2%로 숲 가꾸기 미실행지가 실행지에 비해 약 35.5% 높게 나타났고, 수종별로는 소나무가 참나무류 보다 피해가 크게 나타났다. 임목고사율의 경우도 숲 가꾸기 미실행지가 실행지에 비해 약 41.4% 높게 나타났다. 그리고, 숲 가꾸기 실행지의 산물들이 근접해 있는 임목이 그렇지 않은 임목에 비하여 10${\sim}$20%의 편면연소 피해를 더 받는 것으로 나타났는데, 이것은 임목주변에 숲 가꾸기 산물이 있을 경우, 독립적으로 있는 임목보다 연소물량이 많아 산불강도에 영향을 준 것으로 판단된다. 또한, 적재된 간벌목이 산림 내에 많이 쌓여있는 경우에는 이로 인하여 재발화의 가능성이 있는 것으로 나타나, 숲 가꾸기 산물을 임외로 걷어 내리거나 다른 용도로의 활용방안을 강구해야 할 것으로 판단된다.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2008년도 춘계학술논문발표회 논문집
• /
• pp.321-324
• /
• 2008

Forest fire danger rate of thinning area was lower than that of non thinning area, because height rate of leewardside in burned stem of tree, damage rate of crown and mortality of tree in thinning area were 30.8%, 37% and 48.4% lower than that in non-thinning area, respectively. Intensity of forest fire varied depending upon topographical condition up slope, down slope, aspect, location as well as species, breast height diameter and forest tree density. Especially, a mountaintop area was burned down when forest fire was spread to up slope ridge of mountain.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.223-230
• /
• 2007

Nowaday, for the promotion of producing forest trees, production of excellent timbers, and build-up of public forest area, it is on the increase of the thinning-forest for artificial forest, natural forest, eco-friendly forest, and the forest for development and improvement of forest resources nationwide. Even though the thinning-forest is applied around 180,000ha every year, the quantity of collected/used products is only 18,000ha $(240,000m^3)$ which is 10% of the whole thinning-forest area. Meanwhile, some reports represent that the left products after thinning-forest might increase the severity of forest fire and the waste of resources. Therefore, this study focused on the analysis of correlation between the accumulated products after thinning-forest and forest fire, and providing a preparation plan for the forest fire.

• 한국화재소방학회논문지
• /
• 제21권4호
• /
• pp.52-58
• /
• 2007

본 연구는 숲 가꾸기 실행지와 미실행지의 임분 특성이 산불에 미치는 영향에 관한 연구이다. 조사지역은 강원도 양양군, 인제군 그리고 경기도 가평군 등 3개 군에서 14개소를 선정하였으며, 이중 숲 가꾸기 실행지 9개소, 미실행지의 5개소에 대한 현장조사를 실시하였다. 현장조사를 통해 임목의 수고, 흉고직경, 지하고, 죽은 가지 고사율, 임목밀도, 울폐도, 관목층 및 초본층 피도를 조사하였으며 이 자료를 통해 숲 가꾸기 실행 및 미실행지의 임내특성분석을 실시하였다. 또한 임내특성 분석으로부터 산불발생 및 확산 위험성과의 관계를 분석하였다. 숲 가꾸기 실행지역과 미실행지역의 임분 특성조사 결과 숲 가꾸기 실행지역이 미실행지역에 비해 상대적으로 평균 지하고는 높았고, 임목본수는 적었으며, 죽은 가지 고사율은 적었고, 초본층 피도는 높게 나타나고 있어 숲 가꾸기 실행지역의 산불위험도는 미실행지역보다 낮아질 것으로 판단되었다.

• 한국안전학회지
• /
• 제23권3호
• /
• pp.17-24
• /
• 2008

Elbows with various shapes of local wall thinning were numerically analyzed by finite element method to get load-displacement curves and the maximum loads. Results were compared with the experimental data obtained by another study. Elastic-plastic analysis were carried out under the combined loading conditions of internal pressure and in-plane bending loads. Two types of bending loads were considered such as elbow opening mode and elbow closing mode. Also, two different wall thinning geometries were modeled. Wall thinning area located extrados or intrados of elbow inner surface was considered. Longitudinal and circumferential lengths of the thinning area and the thinned thickness were varied for analysis. The results showed that the maximum load of the wall-thinned elbow decreased with increasing of the circumferential thinning length and the thinned thickness in both of extrados and intrados thinning locations in both loading types. The maximum load obtained by the analysis were in good agreement with the experimentally measured maximum load with the same wall thinning type and dimensions. This supports accuracy of the analysis results obtained in this study.

• 대한기계학회논문집A
• /
• 제30권5호
• /
• pp.533-542
• /
• 2006

In order to assess the integrity of pipes with local thinning area, the plastic strain as well as the elastic strain at the root of thinned region are required particularly when fluctuating load is applied to the pipe. For estimating elastic-plastic strain at local wall thinning area in a straight pipe under tensile load, an estimation model with idealized fully circumferential constant depth wall thinning area is proposed. Based on the compatibility and equilibrium equations a nonlinear estimation equation, from which local elastic-plastic strain can be determined as a function of pipe/defect geometry, material and the applied strain was derived. Estimation results are compared with those from detailed elastic-plastic finite element analysis, which shows good agreements. Noting that practical wall thinning in nuclear piping has not only a circular shape but also a finite circumferential length, the proposed solution for the ideal geometry is extended based on two-dimensional and three-dimensional numerical analysis of pipes with circular wall thinning.

• 한국압력기기공학회 논문집
• /
• 제7권1호
• /
• pp.27-34
• /
• 2011

The objective of this study is to classify the geometry of wall-thinning defect that causes a circumferential crack in the pipe elbows subjected to internal pressure. For this objective, first of all a criterion to determine the occurrence of circumferential cracking at wall-thinned area was developed based on finite element simulation for burst tests of pipe elbow specimens that showed axial and circumferential cracking at wall-thinned area. In addition, parametric finite element analysis including various wall-thinning geometries, locations, and pipe geometries was conducted and the wall-thinning geometries that initiate circumferential crack were determined by applying the criterion to the results of parametric analysis. It showed that the circumferential crack occurs at wall-thinning defect, which has a deep, wide, and short geometry. Also, it is indicated that the pipe elbows with larger radius to thickness ratio are more susceptible to circumferential cracking at wall-thinned area.

• Archives of Plastic Surgery
• /
• 제45권4호
• /
• pp.298-303
• /
• 2018

Flap thinning is a procedure for making a thick flap thinner. This procedure does more than simply fill in the defected area, and it is better for reconstructing the area both functionally and aesthetically. However, because flap thinning is a rather blind procedure, it may have harmful effects on flap vascularity. Therefore, the vasculature of a flap must be understood before performing flap thinning. This paper analyzes the basic anatomy underlying flap thinning based on the previous anatomic study that categorized flaps into 6 types by their vascular structures. This paper also reviews specific studies of frequently practiced flap procedures (deep inferior epigastric artery perforator flap, thoracodorsal artery perforator flap, and anterolateral thigh flap) and presents important precautions for flap thinning procedures. Finally, this paper briefly examines the axiality of the subdermal plexus, which needs to be taken into account when performing flap thinning.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.217-222
• /
• 2007

Since 1973, we attain a successful achievement of nation-wide afforestation such as a thick forest and heaped-up leaves. However, the higher of the formation density in forest, the more dangerous to be a large-scale forest fire whenever fire occurs. According to the type of forest in the country, 42% of the forest is occupied by conifer forest that are highly flammable, and the distribution of forest age is in a transition period from immature forest to mature one. And the structure is too weak to the forest fire for the occurrence and spread because there are too many scrub and shrub trees in the forest. As a matter of course, it is on the increase of the thinning-forest that can shift the forest structure from a weak on forest fire to a strong one nowaday. In other words, thinning-forest has primary purposes such as the promotion of producing forest trees, production of excellent timbers, and build-up of public forest area. Furthermore, in some reports, the reduction of ladder fuel by eliminating the vertical/horizontal fuel in a forest and ensuring spaces in the forest can decrease the occurrence of forest fire and the risk of spread of burning as by-effect. Therefore, this study is designed to clarify the relation with the risk of forest fire by an on-spat-investigation of the characteristics of forest composition on the thinning and the non-thinning area.