• Korean Journal of Plant Resources
• /
• v.14 no.2
• /
• pp.148-151
• /
• 2001

This study was conducted to investigate effect of activated charcoal on growth and yield of Scutelltaria baicalensis G. in different degree of activated charcoal consistency. The results obtained are summarized as follows. Stem length was shown the longest in activated charcoal 30%, and short in control. Also stem diameter was shown the thickest in activated charcoal 30%, and thin in control. Length of main root and thickness of main root were good in activated charcoal 30%. Quality and yield of Scutellaria baicalensis G. were the highest by activated charcoal 30%. Therefore, optimum consistency of activated charcoal was activated charcoal 30%.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.457-462
• /
• 2007

This paper reports on the research which investigates acoustic signals acquired in turning with rough and finish simultaneously. The material is aluminum thin pipe. Two acoustic sensors were set on CNC machine. One was set on the finish bite and the other the rough. Two signals were first analyzed in order to consider how much the acoustic signal from the finish bite was coupled by that from the rough. A simple data collecting system to acquire signals from the finish was then determined because two acoustic signals were little coupled. Second the fundamental experiments were accomplished to study the effects of machine vibration and material state. The signal characteristics due to surface defects were studied from the collected acoustic signal data. The signal analysis was based on real time data, root mean squared average and frequency spectrum by fast fourier transform. As a result, the acoustic signals were made effects by machine condition, material structure. The acoustic signal from the finish bite was closely correlated with surface quality. Two types surface micro defects were then evaluated by the signal characteristics.

• Applied Biological Chemistry
• /
• v.25 no.3
• /
• pp.173-176
• /
• 1982

The amino acids in the mucilage and its hydrolyzed products from Ulmus coreana, Nakai root were detected by thin layer chromatography. The mucilage contained 10 kinds of amino acids; alanine, aspartic acid, glutamine, glutamic acid, hydroxyproline, isoleucine, leucine, proline, phenylalanine and tyrosine. In the hydrolyzed mucilage 14 kinds of amino acids were detected; alanine, aspargine, arpartic acid, glutamine, glutamic acid, hydroxyproline, isoleucine, leucine, methionine, proline, phenylalanine, serine, tyrosine and valine.

• The Journal of the Korean dental association
• /
• v.56 no.4
• /
• pp.208-216
• /
• 2018

Patients with malocclusion may present with preexisting mucogingival problems susceptible to attachment loss during or after orthodontic treatment. Lower anterior teeth especially show a high prevalence of gingival recession following orthodontic treatment. This case report demonstrates hard tissue augmentation of labially thin or deficient alveolar bone (dehiscences and fenestrations) to prevent attachment loss during or after orthodontic treatment. Three patients presented clinically prominent root surfaces and dehiscences and fenestrations on cone-beam computed tomography (CBCT) in lower anterior teeth. Labial hard tissue augmentation of lower anterior teeth was performed with deproteinized bovine bone mineral and collagen membrane. Six months later, hard tissue augmentation reduced root prominence and created a greater volume of hard tissue on lower anterior area in clinical and radiographic findings. Hard tissue augmentation using xenograft could prevent attachment loss associated with orthodontic treatment and maintain stability of healthy periodontium.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.392-392
• /
• 2010

In this study, high-speed chemical dry thinning process of Si wafer and evolution of surface roughness were investigated. Direct injection of NO gas into the reactor during the supply of F radicals from $NF_3$ remote plasmas was very effective in increasing the Si thinning rate due to the NO-induced enhancement of surface reaction but thinned Si surface became roughened significantly. Addition of Ar gas, together with NO gas, decreased root mean square (RMS) surface roughness of thinned Si wafer significantly. The process regime for the thinning rate enhancement with reduced surface roughness was extended at higher Ar gas flow rate. Si wafer thinning rate as high as $22.8\;{\mu}m/min$ and root-mean-squared (RMS) surface roughness as small as 0.75 nm could be obtained. It is expected that high-speed chemical dry thinning process has possibility of application to ultra-thin Si wafer thinning with no mechanical damage.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.6 s.123
• /
• pp.507-514
• /
• 2007

This paper reports on the research which investigates acoustic signals acquired in turning with rough and finish simultaneously. The material is aluminum thin pipe. Two acousto-ultrasonic sensors were set on the finish and the rough bite of the CNC machine. It was first evaluated that one source was affected by the other. It was found that two signals were little affected each other, and that the acoustic signal from the finish bite was more related to the surface defects. Signals from the finish bite only were then analyzed in order to observe several types of surface defects. Second the fundamental experiments were accomplished to study the effects of machine vibration and material state. The signal characteristics due to surface defects were studied from the collected acoustic signals. The analysis was based on real time data, root mean squared average and frequency spectrum by fast fourier transform. As a result, the acoustic signals were made effects by machine condition, material structure. The acoustic signal from the finish bite was closely correlated with surface quality. Two types surface micro defects were then evaluated by the signal characteristics.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.24 no.1
• /
• pp.111-119
• /
• 2021

This study was conducted to investigate the growth characteristics of artificially planted trees on top of the underground parking lots. The trees were planted 17 years ago and are now in good condition. The survey results are as follows. The planting depth of the trees was 0.9 - 1.3m. The horizontal roots of the trees were distributed in the depth of 0.2m ~ 0.6m, Growth condition was also considered to be good. Also, in the case of the straight root of the trees, the pine tree(Pinus densiflora) grew near the bottom but tree root was very thin, and the Japanese hackberry tree(Celtis sinensis) and the zelkova tree(Zelkova serrata) were seemed to bend at the bottom and to grow by changing direction. When trees were planted on artificial ground, the roots grew well horizontally, and the forces of growing vertically were much weakened. because the plants were planted in earth ball state. As a result, it was considered that the roots would hardly penetrate the bottom-pressing concrete floor.

• Proceedings of the Ginseng society Conference
• /
• 1974.09a
• /
• pp.101-113
• /
• 1974

The radioactive compound sodium $acetate-U-C^{14}$ (C-14 acetate) was administered to two- and four-year-old July and September American ginseng (Panax quinquefolium L.) plants and cuttings. The C-14 acetate uptake was approximately $99\%.$ The autoradiochromatograms suggest that the saponins(panaquilins) isolated by preparative thin-layer chromatography contained impurities, especially those isolated from the leaf and stem extracts. The root and fruit methanol extracts yielded relatively pure saponins. The large amounts of panaquilin B and its proximity to panaquilin C on preparative thin-layer plates resulted in some admixing. The average concentration $(\%$ plant dry weight) of semipurified saponins were high in the leaves $(13.8\%),$ compared to fruits $(9.8\%),\;stems\;(7.9\%)\;and\;roots\;(6.3\%).$ The average percentage of C-14 acetate incorporation into panaquilins was $4.8\%.$ The average percentage of C-14 acetate incorporation into panaquilins B and C was higher $(1.40\%\;and\;1.13\%,$ respectively) than that into panaquilin C, (d), G-1 and G-2 $(0.75\%,\;0.65\%,\;0.13\%\;and\;0.53\%,$ respectively). Panaquilin synthesis may be depending upon the part collection period and age of the plant. The average percentage of C-14 acetate incorporation into panaquilin B is high in roots $(0.58\%)\;and\;stems\;(0.48\%);$ that into panaquilins C and (d) high in leaves $(0.40\%\;and\;0.45\%,$ respectively); and that into panaquilin E high in roots and leaves $(0.55\%\and\;0.50\%,$ respectively). Panaquilin G-2 was synthesized in all parts of plants. The panaquilins appear to be biosynthesized more actively in July than September (exception-panaquilin G-l). Panaquilins B, C and G-1 may be biosynthesized more actively in four-year-old plants and panaquilins (d) and E more actively in two-year-old plants. The results from expectance with cuttings suggest that the panaquilins are synthesized de novo in the above-ground parts of ginseng plants, and that panaquilin G-l may be synthesized de novo in the leaf. It is known from the tissue culture studies that panaquilins are produced by leaf, stem and root callus tissues and callus-root cultures of American and Korean ginseng plants. Panaquilins may actively be synthesized de novo in most any cell or organ of the ginseng plants. It was verified that C-14 acetate was incorporated into the panaxadiol portions of the panaquilins of two-year-old plants (sp. act., 0.56 $m{\mu}Ci/mg$) and four-year-old plants (sp. act., 0.54 $m{\mu}Ci/mg$).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.10-10
• /
• 2009

Transparent BNO thin films were grown on Al-doped ZnO (AZO)/Ag/AZO/polyethersulfon (PES) (abbreviated as AAAP) transparent electrodes at a low temperature by the NCD technique. The BNO films grown on the crystallized AZO/Ag/AZO (AAA) electrodes exhibit an amorphous phase with a root mean square (rms) roughness of approximately 2 nm in the range of deposition temperature. The capacitors (Pt/BNO/AAAP) with BNO films grown at $100^{\circ}C$ show a dielectric constant of 24 and dissipation factor of 8% at 100 kHz, a leakage current density of about $8{\times}10^{-6}A/cm^2$ at an applied voltage of 1.0V. The optical transmittances of the BNO/AAAP exhibited above 80% at wavelength of 550nm at all of deposition temperature. The mechanical stability of the BNO/AAA as well as AAA electrode with the PES substrates through the bending was ensured for flexible electronic device applications. The transparent BNO capacitors grown on AAAP are powerful candidate for integration with the transparent solar cells.

• Journal of Korea Foundry Society
• /
• v.11 no.1
• /
• pp.44-53
• /
• 1991

The proper feeding conditions for thin Al-Alloy (AA336, JIS AC8A) castings in permanent mold were investigated to eliminate microshrinkage porosity. 5mm-thick plates (200mm long, 60mm wide) were cast with increasing padding taper from 0 to 5% under different conditions : (1) constant mold temperature of $350^{\circ}C$, (2) continuous production with uniform mold thickness (10mm), (3) continuous production with a negative taper of 2.5% in mold thickness (thickness decreasing in direction to riser). The test casting were machined off to the midplane and the shrinkage porosity was examined visually. The critical padding taper which can just eliminate the shrinkage porosity was determined for each condition, i.e. : (1) 4.5% at the constant mold temperature, (2) 3.5% for continuous production with the uniform mold thickness (3) 1.5% for continuous production with the taper in mold thickness. A computer simulation by a finite difference analysis program was applied to the test casting. The liquid fraction gradient (LFG) and the temperature gradient divided by the square root of the cooling rate (G /SR) were calculated at the end of solidification and compared with the shrinkage porosity area in the castings. For the case of constant mold temperature, LFG is a better parameter to predict shrinkage porosity than G /SR and its critical value is around 11%/cm. But for the case of continuous production, neither LFG nor G /SR could be a reliable parameter. The experimental results about the critical padding taper are of practical interest for designing permanent molds and castings. The computer simulation results stimulate further research to be directed on the prediction of centerline microshrinkage porosity in continuous production.