A micropapillary variant of urothelial carcinoma (MPC) is a distinct entity with an aggressive clinical course. It has a micropapillary configuration resembling that of ovarian papillary serous carcinoma. Its cytologic features have rarely been reported. We report a case of MPC detected by urine cytology. A woman aged 93 years presented with a chief complaint of macroscopic hematuria. Cytology of her voided urine showed clusters of malignant cells in a micropapillary configuration. Each tumor cell had a vacuolated cytoplasm, a high nuclear:cytoplasmic ratio, and irregular hyperchromatic nuclei. An ureteroscopic examination revealed exophytic sessile papillary masses extending from the left lateral wall to the anterolateral wall of the urinary bladder. A transurethral resection of the tumor was carried out. The tumor was characterized by delicate papillae with a thin, well-developed fibrovascular stromal core and numerous secondary micropapillae lined with small cuboidal cells containing uniform low- to intermediate-grade nuclei and occasional intracytoplasmic mucinous inclusions. These tumor cells infiltrated the muscle layers of the bladder, and lymphatic tumor emboli were frequently seen. Recognizing that the presence of MPC components in urinary cytology is important for distinguishing this lesion from low-grade papillary lesions and high-grade urothelial carcinomas can result in early detection and earlier treatment for an improved treatment outcome.
Proceedings of the Korea Society for Energy Engineering kosee Conference
/
1995.05a
/
pp.185-198
/
1995
This is an experimental study conducted to visualize the nucleate boiling phenomena and flow regimes occurring inside the liquid pool in a closed two-phase thermosyphon. To meet this purpose, an annular-type thermosyphon was designed and manufactured using a glass tube and a stainless steel tube, being assembled axisymmetrically. The heat to be supplied to the working fluid is generated within a very thin layer of stainless steel tube wall by applying a high frequency electromagnetic field through the induction coil, axisymmetrically set around the evaporator zone. Some important results were as follows ; 1) Considering the structural complexity of the tested thermosyphon, it showed good performance for the range of heat flux 2< q" <25kW/$m^2$ and saturation vapor pressure, 0.1<Pv<1.1bar 2) different type of nucleating boiling regimes were observed as described below, -Pulse boiling regime : Flow pattern changed cyclically with time during 1 cycle of pulse boiling process. The onset of Nucleation was followed by expulsive growing of vapor bubble, resulting in the so called blow-up phenomenon, massive expulsion of large amount of liquid around the bubble. -Transient : Some spherical vapor bobbles were observed growing out from 2~3 nucleating sites, that was dispersed at the lower part of the heated tube wall in the liquid pool. But the rest upper region above the nucleating sites were filled with churns or bubbles of vapor. -Continuous nucleate boiling regime : The whole zone of evaporator was filled with lots of spherical vapor bubbles, and the bubbles showed tendency to decrease in diameter as the heat flux increased.ased.
Kim, Young Wook;Lee, Seong Hee;Hong, Soon Chang;Lee, Ho Hak;Park, Sang-Joon;Lee, Gwon Jun;Kim, Jhin Gook
Tuberculosis and Respiratory Diseases
/
v.55
no.5
/
pp.526-530
/
2003
Bronchogenic cysts are generally presented as a well defined mass that have thin and smooth wall in the intrapulmonary or mediastinal area by simple chest radiographs. We present the case of a 20-year-old man with a ill-defined left upper lobe mass, found by chest radiographs. At the preoperative examinations, chest computed tomography showed ill-defined mass with Hounsfield Number 26, and nonspecific findings were shown by the bronchoscopy and percutaneous needle aspiration. The patient was undertaken the left upper lobectomy. The surgical specimen contained a ill-defined mass, measuring $2{\times}3$ cm. On the section of the mass, a cyst containing dark brown thick materials was noted. The cyst was unilocular, and the wall showed a trabeculation. Microscopically, the cystic mass was lined with ciliated pseudostratified columnar epitheliums and surrounded by smooth muscle and cartilage.
Doxorubicin is an anthracycline-family polyketide compound with a very potent anti-cancer activity, typically produced by Streptomyces peucetius. In order to increase doxurubicin productivity, a semi-industrial doxorubicin-producing Streptomyces strain named BR-Dox was cultured in a R2YE liquid medium containing CaCO$_3$, and then converted to a cell wall-free protoplast using lysozyme treatment method, followed by PEG-mediated cell wall regeneration. Among several protoplast-regenerated Streptomyces BR-Dox strains, two independent isolates named BR-Dox4 and BR-Dox6 were visually selected using thin layer chromatography (TLC) based on the pigment overproducing phenotype. Comparing with Streptomyces BR-Dox parental strain, two protoplast-regenerated strains, BR-Dox4 and BR-Dox6 exhibited 25.2% and 12.2% higher doxorubicin productivity analyzed by high pressure liquid chromatography (HPLC), respectively. This result suggests that a protoplast-regeneration of an antibiotics-producing Streptomyces strain should be a promising strain development approach for antibiotics overproduction in Streptomyces species.
Journal of the Korea Academia-Industrial cooperation Society
/
v.16
no.9
/
pp.5789-5794
/
2015
Recently, thin and light-weight production technologies are needed in IT industry in accordance with increase of the smart phones and mobile PC products. In order to make light and high rigidity products, engineering plastic and aluminum materials are frequently used in products appearance and frame hat support structure. Especially aluminum extrusion and CNC Brick processes are widely used for high strength and high rigidity technology. But extrusion method has constraints to apply exterior design and CNC Brick process has relatively high production cost and low speed of manufacturing. In this research, a new process method is introduced in order to reduce material cost and to improve manufacturing speed dramatically. Plate forging process means basically that thickening of local wall area thickness after deform exterior shape by deep drawing and bending process. Therefore, it is possible to minimize the waste of material and the manufacturing time. In this study the process of plate forging is designed using finite element program AFDEX-2D and the thickness and the width of initial deformed blank. And it is verified as a sample which is a part of laptop developed through the proposed plate forging method.
Kim, Sang-Wha;Seo, Byung-Chul;Oh, Deuk-Young;Seo, Je-Won;Ahn, Sang-Tae;Rhie, Jong-Won
Archives of Plastic Surgery
/
v.37
no.6
/
pp.847-849
/
2010
Purpose: Traditional radical surgery for vulvar cancer produces severe skin and soft tissue defects in the vulvar and vaginal area. Vulvoperineal V-Y advancement fasciocutaneous flaps have limitations in advancement and tension at the wound margin and vaginal orifice area, causing wound disruption or vaginal wall exposure. Therefore, we designed the "Butterfly flap" using a vulvoperineal V-Y advancement fasciocutaneous flap and an inguinal rotational skin flap for 3-dimensional reconstruction of vagina and vulvar area. Methods: A 27 year-old female was diagnosed with vulvar intraepithelial neoplasia. Radical vulvectomy and full-thickness-skin-graft was performed. We designed a vulvoperineal V-Y advancement fasciocutaneous flap as the greater wing and inguinal rotational skin as the lesser wing. After flap elevation, the inguinal flap was rotated $180^{\circ}$ to reconstruct the labia major and vaginal orifice. The perineum was reconstructed using V-Y advancement flaps. Results: The flap survived completely, without any complications. After 6 months, the patient was able to perform normal sexual activities and after 18 months, the patient was able to give birth to normal child by caesarean section. Conclusion: The traditional vulvoperineal V-Y advancement fasciocutaneous flap is thin, reliable, easily elevated and matches local skin quality. However, the vaginal wall becomes exposed due to limited advancement and tension of the flap. The "Butterfly flap" using a vulvoperineal V-Y advancement fasciocutaneous flap and an inguinal rotational skin flap is useful for the release of vaginal orifice contracture, reconstruction of the labia major, and 3-dimensional reconstruction of vagina and vulvar area.
Proceedings of the Korean Vacuum Society Conference
/
2013.08a
/
pp.75.2-75.2
/
2013
Atomic layer deposition (ALD), utilizing self-limiting surface reactions, could offer promising perspectives for future efficient energy conversion devices. The capabilities of ALD for surface/interface modification and construction of novel architectures with sub-nanometer precision and exceptional conformality over high aspect ratio make it more valuable than any other deposition methods in nanoscale science and technology. In the context, a variety of researches on fabrication of active materials for energy conversion applications by ALD are emerging. Among those materials, one-dimensional nanotubular titanium dioxide, providing not only high specific surface area but also efficient carrier transport pathway, is a class of the most intensively explored materials for energy conversion systems, such as photovoltaic cells and photo/electrochemical devices. The monodisperse, stoichiometric, anatase, TiO2 nanotubes with smooth surface morphology and controlled wall thickness were fabricated via low-temperature template-directed ALD followed by subsequent annealing. The ALD-grown, anatase, TiO2 nanotubes in alumina template show unusual crystal growth behavior which allows to form remarkably large grains along axial direction over certain wall thickness. We also fabricated dye-sensitized solar cells (DSCs) introducing our anatase TiO2 nanotubes as photoanodes, and studied the effect of blocking layer, TiO2 thin films formed by ALD, on overall device efficiency. The photon convertsion efficiency ~7% were measured for our TiO2 nanotubebased DSCs with blocking layers, which is ~1% higher than ones without blocking layer. We also performed open circuit voltage decay measurement to estimate recombination rate in our cells, which is 3 times longer than conventional nanoparticulate photoanodes. The high efficiency of our ALD-grown, anatase, TiO2 nanotube-based DSCs may be attributed to both enhanced charge transport property of our TiO2 nanotubes photoanode and the suppression of recombination at the interface between transparent conducting electrode and iodine electrolytes by blocking layer.
Kim, Young Jin;Kim, Jae Min;Yi, Hyeong Joong;Bak, Koang Hum;Kim, Choong Hyun;Oh, Suck Jun
Journal of Korean Neurosurgical Society
/
v.29
no.4
/
pp.521-527
/
2000
Objective : In general, most of saccular aneurysms arise at arterial divisions, but those arising at unbranched site are rare. These aneurysms might impose neurosurgeons a formidable surgical challenge, due to uncommon features and a difficult surgical technique. Methods : Between the period of Jan. 1996 and Dec. 1998, a total of 110 cases of aneurysms were operated. Among them, five cases of unbranched site aneurysms were retrospectively analyzed through medical records, angiographic and operative findings. Results : The incidence of aneurysms unrelated to arterial branches was 4.5%. All cases presented with subarachnoid hemorrhage(SAH) ; three(60%) were at internal carotid artery(ICA) and two(40%) at middle cerebral artery (MCA). Two had a history of hypertension and three showed atherosclerotic changes in the arterial wall. One ICA and one MCA aneurysms proved to be a blood blister-like aneurysm(BBA) in their shape. Strikingly, a rapid neurological deterioration was shown in two ruptured ICA variants, which resulted in death and another two aneurysms left with morbidity. Conclusion : The preoperative neurological status in most cases was relatively poor compared to that of aneurysms arising at a branched site. Regarding its pathogenesis, atherosclerosis as well as hemodynamic factors may play an important role in formation of these variant aneurysms among various etiological factors. The overall prognosis of unbranched site aneurysms was worse than that of branched site aneurysms. In cases of BBAs, special attention was requisite to handle them during clipping and/or wrapping due to an easy fragile, thin aneurysmal wall.
Aortobronchial fistula (ABF) induced by an infected pseudoaneurysm of the thoracic aorta is a life-threatening condition. As surgical treatment is associated with significant mortality and morbidity, thoracic endovascular aneurysm repair (TEVAR) may be an alternative for the treatment of ABF. However, the long-term durability of this intervention is largely unknown and the recurrence of ABF is a potential complication. We experienced a case of recurrent ABF after stent grafting as an early procedure for an infected pseudoaneurysm of the thoracic aorta. Remnant ABF, bronchial and/or aortic wall erosion, vasa vasorum connected with ABF, and recurrent local inflammation of the thin aortic wall around ABF might cause recurrent hemoptysis. As a result, we suggest that TEVAR should be considered as a bridge therapy for the initial treatment of ABF resulting from an infected pseudoaneurysm, and that several options, such as second-stage surgery, should be considered to prevent the recurrence of ABF.
Jang, Seok Won;Nam, Seung Won;Shazib, Shahed Uddin Ahmed;Shin, Mann Kyoon
Animal Systematics, Evolution and Diversity
/
v.38
no.4
/
pp.226-237
/
2022
Arcuospathidium is a haptorian ciliate genus composed of 18 species, and only one species has been reported in Korea. Here, we identify two unrecorded Arcuospathidium subspecies by morphological observation of both living and protargol-impregnated specimens with the small subunit ribosomal RNA (18S rRNA) gene sequence. These subspecies, Arcuospathidium cultriforme cultriforme (Penard, 1922) Foissner, 1984 and A. cultriforme scalpriforme (Kahl, 1930) Foissner, 2003, were isolated from various terrestrial habitats in July and August 2013, respectivley. Arcuospathidium cultriforme cultriforme is similar to A. cultriforme scalpriforme by a knife-shaped body, a twisted-shaped macronucleus, number of dorsal brushes, position of dorsal brushes, and shape of macronucleus but former mainly differs from the body length to oral bulge length ratio (27-38% vs. 41-53%), extrusome (one types vs. three types), cyst shape (roughly faceted wall vs. smooth surface and thin wall) and number of somatic kinety rows(18-30 vs. 30-44). Additionally, we analyzed the 18S rRNA gene sequences of two A. cultriforme subspecies and compared them with the sequences from GenBank to confirm their identification at the molecular level. As the results of genetic analysis, the 18S rRNA gene sequence of the Korean A. cultriforme cultriforme population is most similar to that of Austrian population. Also, the sequence of the Korean A. cultriforme scalpriforme population is most similar to that of another population with some nucleotide differences.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.