• Archives of Plastic Surgery
• /
• 제37권5호
• /
• pp.589-594
• /
• 2010

Purpose: Full thickness skin grafts are useful in the reconstruction of facial skin defects when primary closure is not feasible. Although the supraclavicular area has been considered as the choice of donor site for large facial skin defect, many patients are reluctant to get a neck scar and some patients do not have enough skin to cover the defect owing to the same insult occurred to the neck such as burn accident. We present several cases of reconstruction of facial skin defects by freehand full-thickness skin graft from anterolateral chest wall resulting aesthetically acceptable outcome with lesser donor site morbidity. Methods: Retrospective review was performed from March, 2007 to September, 2009. 15 patients were treated by this method. Mean age was 31.5 years. The ethiology was congenital melanocytic nevus in 7 cases, capillary malformation in 5 cases and burn scar contracture in 3 cases. Mean area of lesion was measured to 67.3 cm2 preoperatively. The lesion was removed beneath the subcutaneous fatty tissue layer. The graft was not trimmed to be thin except defatting procedure. For the larger size of defect, two pieces of grafts were harvested from both anterolateral chest wall in separation and combined by suture. Results: The mean follow up period was 9.7 months. All the grafts survived without any problem except small necrotic areas in 4 cases, which healed spontaneously under conventional dressings in 6 weeks postoperatively. Color match was relatively excellent. There were 2 cases of hyperpigmentation immediately, but all of them disappeared in a few months. Conclusion: In cases of large facial skin defects, the anterolateral chest wall may be a good alternative choice of full-thickness skin graft.

• 비파괴검사학회지
• /
• 제36권5호
• /
• pp.370-376
• /
• 2016

구조물 표면은 부식으로 인하여, 크랙이나 감육이 발생할 수 있으며, 이로 인하여 구조물의 파단으로 귀결되어 많은 인명 피해와 재산 손실을 초래할 수 있다. 이에 따라, 박판 구조물이나 배관 구조물과 같이 검사 면적에 비해 두께가 얇은 구조물에 대한 레이저 영상화 기법은 최근 10여년간 꾸준히 연구가 진행되었다. 가장 많이 사용되는 방법으로는 펄스 레이저를 이용한 영상화 시스템이다. 이 방법을 이용하여 평판 구조물, 배관 등 다양한 구조물을 스캐닝하여 비교적 짧은 시간에 원하는 영역을 검사하고 영상화하는 기법이 개발되었다. 하지만, 이 기법은 음파가 결함에 의해 반사되는 반사파를 이용하여 영상화하는 기법으로 검사 위치마다 수 ms의 시간지연이 필요하며, 검사 위치마다 레이저 빔을 집속해주는 렌즈가 필요하여 고가의 복잡한 시스템이 필요하다. 본 연구에서는 연속 가진기법을 이용하여 구조물에 정상파(standing wave)를 가진하고, 이 정상파를 위치별로 스캐닝하여 결함을 영상화하는 기술을 제안하였다. 평판 구조물에 두께가 변화하는 결함을 인공적으로 삽입하여, 제안된 기술의 두께 변화 탐지 가능성을 제시하였다.

• 한국재료학회지
• /
• 제18권6호
• /
• pp.339-346
• /
• 2008

Single-crystal $ZnIn_2S_4$ layers were grown on a thoroughly etched semi-insulating GaAs (100) substrate at $450^{\circ}C$ with a hot wall epitaxy (HWE) system by evaporating a $ZnIn_2S_4$ source at $610^{\circ}C$. The crystalline structures of the single-crystal thin films were investigated via the photoluminescence (PL) and Double-crystal X-ray rocking curve (DCRC). The temperature dependence of the energy band gap of the $ZnIn_2S_4$ obtained from the absorption spectra was well described by Varshni's relationship, $E_g(T)=2.9514\;eV-(7.24{\times}10^{-4}\;eV/K)T2/(T＋489K)$. After the as-grown $ZnIn_2S_4$ single-crystal thin films was annealed in Zn-, S-, and In-atmospheres, the origin-of-point defects of the $ZnIn_2S_4$ single-crystal thin films were investigated via the photoluminescence (PL) at 10 K. The native defects of $V_{Zn}$, $V_S$, $Zn_{int}$, and $S_{int}$ obtained from the PL measurements were classified as donor or acceptor types. Additionally, it was concluded that a heat treatment in an S-atmosphere converted $ZnIn_2S_4$ single crystal thin films into optical p-type films. Moreover, it was confirmed that In in $ZnIn_2S_4$/GaAs did not form a native defects, as In in $ZnIn_2S_4$ single-crystal thin films existed in the form of stable bonds.

• 한국태양에너지학회 논문집
• /
• 제25권4호
• /
• pp.1-11
• /
• 2005

The stoichiometric mixture of evaporating materials for the $CuInSe_2$ single crystal thin film was prepared from horizontal furnace. Using extrapolation method of X-ray diffraction patterns for the polycrystal $CuInSe_2$, it was found tetragonal structure whose lattice constant $a_0$ and $c_0$ were $5.783\;{\AA}$ and $11.621\;{\AA}$, respectively. To obtain the $CuInSe_2$ single crystal thin film, $CuInSe_2$ mixed crystal was deposited on throughly etched GaAs(100) by the HWE(Hot Wall Epitaxy) system. The source and substrate temperature were $620^{\circ}C$ and $410^{\circ}C$ respectively. The crystalline structure of $CuInSe_2$ single crystal thin film was investigated by the double crystal X-ray diffraction(DCXD). Hall effect on this sample was measured by the method of Van der Pauw and studied on carrier density and mobility depending on temperature. From Hall data, the mobility was likely to be decreased by impurity scattering in the temperature range 30 K to 100 K and by lattice scattering in the temperature range 100 K to 293 K. The temperature dependence of the energy band gap of the $CuInSe_2$ obtained from the absorption spectra was well described by the Varshni's relation, $E_g(T)=1.1851\;eV-(8.99{\times}10^{-4}\;eV/K)T^2/(T+153\;K)$. The open-circuit voltage, short current density, fill factor, and conversion efficiency of $n-CdS/p-CuGaSe_2$ heterojunction solar cells under $80\;mW/cm^2$ illumination were found to be 0.51V, $29.3\;mA/cm^2$, 0.76 and 14.3 %, respectively.

• 한국태양에너지학회 논문집
• /
• 제38권1호
• /
• pp.25-36
• /
• 2018

The stoichiometric mixture of evaporating materials for the $CaAl_2Se_4$: Co single crystal thin film was prepared from horizontal furnace. Using extrapolation method of X-ray diffraction patterns for the polycrystal $CaAl_2Se_4$, it was found orthorhomic structure whose lattice constant $a_0$, $b_0$ and $c_0$ were 6.4818, $11.1310{\AA}$ and $11.2443{\AA}$, respectively. To obtain the $CaAl_2Se_4$: Co single crystal thin film, $CaAl_2Se_4$: Co mixed crystal was deposited on throughly etched Si (100) by the HWE (Hot Wall Epitaxy) system. The source and substrate temperature were $600^{\circ}C$ and $440^{\circ}C$ respectively. The crystalline structure of $CaAl_2Se_4$: Co single crystal thin film was investigated by the double crystal X-ray diffraction (DCXD). Hall effect on this sample was measured by the method of Van der Pauw and studied on carrier density and mobility depending on temperature. From Hall data, the mobility was likely to be decreased by impurity scattering in the temperature range 30 K to 100 K and by lattice scattering in the temperature range 100 K to 293 K. The temperature dependence of the energy band gap of the $CaAl_2Se_4$: Co obtained from the absorption spectra was well described by the Varshni's relation, $E_g(T)=3.8239eV-(4.9823{\times}10^{-3}eV/K)T_2/(T+559K)$. The open-circuit voltage, short current density, fill factor, and conversion efficiency of $p-Si/p-CaAl_2Se_4$: Co heterojunction solar cells under $80mW/cm^2$ illumination were found to be 0.42 V, $25.3mA/cm^2$, 0.75 and 9.96%, respectively.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2113-2118
• /
• 2007

In this study, a mathematical model for a thermal analysis of a flat heat pipe with a grooved wick structure is presented. The effects of the liquid-vapor interfacial shear stress, the contact angle, and the amount of liquid charge have been included in the proposed model. In particular, the axial variations of the wall temperature and the evaporation/condensation rates are considered by solving the one-dimensional conduction and the augmented Young-Laplace equations, respectively. In order to verify the model, the results obtained from the model are compared to existing experimental data.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제21권3호
• /
• pp.312-316
• /
• 1999

When the external force was applied to the orbit the most thin area might be displaced. These were usually orbital floor and/or medial wall of orbit. Among these cases some who showed the entrapment of the muscle between the fractured fragments needed the surgical treatment. We had operated 4 cases of the "blow-out" fracture via subciliary approach. The entrapped muscles were freed from fragments and the bony defect was restored with micro-titanium mesh. Mean follow-up periods was 15 months and there were no complication observed.

• Investigative Magnetic Resonance Imaging
• /
• 제22권1호
• /
• pp.61-64
• /
• 2018

Pancreatic lymphoepithelial cysts (LECs) are rare pancreatic cysts with squamous epithelial lining surrounded by dense lymphoid tissue. A preoperative diagnosis of LECs is difficult due to imaging diversity and inadequate documentation because of their rarity. We present a case of surgically confirmed pancreatic LEC with magnetic resonance imaging (MRI) findings as heterogeneous signal intensity on T2-weighted images with multiple septa-like structures, slightly hypo-signal intensity on T1-weighted images, and thin-wall enhancement on dynamic contrast images. LECs are benign lesions without any malignant potential. Therefore, the inclusion of LEC in the differential diagnosis of cystic pancreatic lesions may reduce unnecessary surgical procedures.

• 대한기계학회논문집B
• /
• 제22권1호
• /
• pp.1-11
• /
• 1998

For the analysis of phonon heat transfer within short time and spatial scales, conventional macroscopic heat conduction equations with jump boundary conditions are tried and the results are compared to those of equation of phonon radiative transport(EPRT), which is one of microscopic transport equation. In transient state the macroscopic temperatures show far different behavior from EPRT. In steady state the hyperbolic temperatures with temperature jump at the wall from time relaxation model agrees well with EPRT temperatures. Since EPRT is also an approximate form of microscopic transport equation and there are no experimental results to verify the proposed model in this study, we can not conclude whether the approaching method from this study is valid or not. To the authors' knowledge, there are no experimental results available which can be used to test the validity of these models. Such an experiment, while difficult to conduct, would be invaluable.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권5호
• /
• pp.509-518
• /
• 2005

Liquid film thickness in laminar film condensation for flow over a flat plate generally is so thin that both fluid acceleration and thermal convection within the liquid film can be neglected. An integral solution method is proposed to solve the conjugate problems of laminar film condensation and heat conduction in a solid wall. It is found that approximate solutions of the governing equations involve four physical parameters to describe the conjugate heat transfer problem for laminar film condensation. It is shown that the effects of interfacial shear. mass transfer and local heat transfer are strongly dependent on the thermo-physical properties of the working fluids and the Jacob number.