• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.163-163
• /
• 2012

We observed strain evolution of P3HT crystals in P3HT:PCBM films and the effect of Al electrode on the evolution during real time annealing process. Based on simple assumptions, both relaxed lattice parameters and thermal expansion coefficient could be quantitatively determined. P3HT:PCBM films displayed tensile strain in as-prepared samples regardless of the presence of an Al layer. In the absence of Al layer, P3HT crystals showed only strain relaxation at an annealing temperature of $180^{\circ}C$. Meanwhile In the presence of an Al layer, the strain was relaxed and changed to compressive strain at around 120C annealing temperature, which indicated a tightening of the thiophene ring packing. These behaviors support the improved performance of devices fabricated by post annealing process.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.1
• /
• pp.33-39
• /
• 2015

This paper investigates the underwater acoustic radiation from a periodically stiffened cylindrical shell excited resiliently mounted machinery. Underwater acoustic radiation is important to a submarine. Generally, submarine structure can be modeled as stiffened cylindrical shell immersed in water. Analytical model is derived for the far-field acoustic radiation from machinery installed inside cylindrical shell. The analytical model includes the effect of fluid loading and interactions between periodic ring stiffeners. Transmitted force from machine to a shell through isolator can be different by the impedance of shell. In this paper the effect of a shell impedance for acoustic radiation is investigated. Impedance of a shell should be considered if thickness of a shell is thin.

• Journal of Korean Association for Spatial Structures
• /
• v.2 no.1 s.3
• /
• pp.93-102
• /
• 2002

Pressure loads caused by gas, water and wind are the most important load cases in structural analysis. Often the pressure loads are approximated by constant directional loads since it is difficult to evaluate the exact value. However, the pressure load is defined as a displacement dependent one and it is necessary to consider the follower effects of the load in analysis procedure. In this study, the large deformation analysis considering geometrical nonlinearity for shell structures under pressure loads is presented. Finite element by using a three-node flat triangular shell element is formulated and the follower effects of the pressure load are included in the formulation. Some of results are presented for cantilevered beam under uniform external pressure and thin circular ring under non-uniform external pressure. The present results are in good agreement with the results available in existing literature and commercial software ABAQUS.

• Journal of the Korea Furniture Society
• /
• v.18 no.2
• /
• pp.100-105
• /
• 2007

In this report, we describe the anatomical features of Gmelina arborea Roxb. belong to the genera of Verbenaceae native to Bangladesh and safranine penetration depth in radial and longitudinal directions. The wood of this species was characterized mostly by distinct growth ring boundaries, diffuse-porous, simple perforations, alternate non-vestured intervessel pits, and relatively short vessel elements and medium fibers. Thin to thick walled septate fibers with simple to minutely bordered pits are confined to the radial walls. Tyloses are common. They are paratracheal axial parenchyma vascicnetric and confluent. Rays not higher than 1milimeter are found, and larger rays commonly 4 to 5 seriate are dominantly present, as are multi seriate rays composed of a procumbent ray with 1 row of square or upright cells. Acicular crystals are present in ray cells. Another experiment was taken under consideration to observe the liquid penetration depth in longitudinal and radial directions using safranine. It was found that safranine penetrated easily in longitudinal direction and sapwood was more permeable than heartwood.

• Korean Journal of Animal Reproduction
• /
• v.12 no.1
• /
• pp.1-10
• /
• 1988

In order to investigate the spermiogenesis of the Korean Native Jin-do dog, the tissue sampled from the testis and the epididymis of matured dog were conventionally prepared as thin sections. And then these sections were observed under a transmission electron microscope. Based on the development of various permanent organelle and certain transient structures, the spermiogenesis of the dog could be divided into four major phases: Golgi, cap, acrosome and maturation; and these phases had been futher subdivided into seven stages. In the maturatin phase, the karyoplasm has been condensed completely and the nucleus eleongated as the movement of the unclear ring. The equatorial segment has notable waist-form at the late acrosomal stage. In the cross section of the tail, it shows a typicl 9＋9＋2 pattern of the axial fiber bundle condisting of the dense fibers, the inner fibers, and a central pair. The dense fiber number 1, 5, 6, and 9 were larger in diameter than the rest of the dense fibers.

• Korean Journal of Animal Reproduction
• /
• v.8 no.2
• /
• pp.70-78
• /
• 1984

In order to investigate the spermiogenesis of Korean cattle spermatozoa, the tissue obtained from the testis and the epididymis of six matured bull were conventionary prepared as thin sections and these sections were observed under a transmission electron microscope. Based on the development of the various permanent organelles and certain transient structures, the spermiogenesis of the Korean cattle could be divided into four main phases: Golgi, cap, acrosome and maturation, and these phases had been further subdivided into a total of nine stages. In the maturation phase, the condensation of the nuclear karyoplasm had progressed from the u, pp.r side to the lower side of the nucleus as the movement of the nuclear ring which would be disa, pp.ared after maturation.

• Electrical & Electronic Materials
• /
• v.8 no.4
• /
• pp.504-508
• /
• 1995

The purpose of this research is to study on characteristics of corona ignitor which was designed for ignition of plasma, used at hard coating, surface treatment and thin film preparation, at high pressure. Corona ignitor composed of hollow type inner electrode and ring type external electrode. Though corona voltage increased with increasing distance between electrodes, corona discharge can be controlled stably. The gas flow in hollow type inner electrode and the construction between electrodes affect a length of corona flame and corona phenomenon. It is possible to ignite the . plasma, usually generated at low pressure(10 Torr), at high pressure(100 Torr) by corona ignitor.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.756-759
• /
• 2002

Nanoparticles of titanium dioxide$(TiO_2)$ were prepared by photochemical synthesis. Surface structure, morphology and particle size of $TiO_2$ thin films were investigated by UV-VIS spectrophotometer, scanning electron microscopy(SEM) and transmission electron microscopy(TEM). All process was prepared at room temperature. The absorption peak of the films was showed at 360nm and $TiO_2$ nanopaticle size was observed at about 20~30nm. Electron diffraction ring patterns of $TiO_2$ nanoparticles and crystallographic spacing were observed by TEM. As a result, crystallographic spacing was about 3.6A in HR-TEM micrographs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.130-133
• /
• 2006

In order to study the relationship between the discharge characteristics of an ac PDP and the surface conductivity of MgO thin film, the surface current across a ring shaped MgO film was measured by exposure to monochromatic vacuum ultraviolet from the synchrotron radiation source whose wavelength ranges from 60nm to 240nm $(5.5eV{\sim}25eV)$. The experimental results show that the surface current begins to increase rapidly at the photon energy of about 9 eV which might correspond to the valence band edge of MgO. The difference in the surface current level correlate well with the differences in the preparation method of MgO films and their respective discharge characteristics such as the firing, minimum sustain voltages, address voltage margin and address discharge delay time.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.7
• /
• pp.1044-1051
• /
• 2009

During contact between surfaces, there is wear and the generation of wear. The particles contained in the lubricating oil carry detailed and important monitoring information about the condition of the machine. Therefore, this paper was undertaken for the Ferrography system of wear debris generated from a lubricated moving machine surface. The lubricating wear test was performed under different experimental conditions using the Falex wear test of the Pin and V-Block types by Ti(C,N) coated. It was shown from the test results that wear particle concentration(WPC), wear severity index(Is) and size distribution have come out all higher with increases in sliding friction time. With the Ferrogram thin leaf wear debris as well as ball and plate type wear particles were observed.