• Restorative Dentistry and Endodontics
• /
• v.24 no.2
• /
• pp.322-329
• /
• 1999

The hydrodynamic theory of dentin sensitivity states that movement of tubular contents or tubular fluid, in either direction of dentinal tubule, causes dentin sensitivity. A corollary of that theory is that anything that can decrease dentinal fluid movement or dentin permeability should decrease dentin sensitivity. A wide variety of physicochemical methods have been used to reduce the permeability and sensitivity of exposed dentin. The purpose of this study was to evaluate the ability of 4 kinds of clinical desensitizing agents(2% NaF, 30% Potassium oxalate, MS Coat$^{(R)}$, Tubulitec system$^{(R)}$) to reduce the rate of fluid flow through dentin in vitro. Sixty coronal dentin discs, 1mm in thickness, were prepared from extracted third molars, free from decay and wear. Dentin discs were treated with 3% EDTA(Tubulicid Plus$^{(R)}$(Dental Therapeutics AB, Sweden)) to remove the smear layer and debris occluding the tubular orifices. After placing the discs in a split chamber device, the rate at which physiologic saline solution could filter across dentin under 150cm $H_2O$ hydrostatic pressure was measured. The occlusal side of the discs were then treated with MS Coat$^{(R)}$, 2% NaF, Tubulitec system$^{(R)}$, and 30% Potassium oxalate, and the filter ratio of the saline solution was measured again. The following conclusions were drawn : 1. Hydraulic conductance which was measured after the application of desensitizing agents was decreased in all the groups(p<0.05). 2. % change of hydraulic conductance was compared but no significant difference was found among the four desensitizing agents(p>0.05). 2% NaF, 30% Potassium oxalate, MS Coat$^{(R)}$ and Tubulitec system$^{(R)}$ decreased the permeability of dentin. It is considered that above four agents can be used in treating the hypersensitive teeth.

• Journal of Sensor Science and Technology
• /
• v.2 no.1
• /
• pp.95-99
• /
• 1993

a-Si : H TFTs for image sensor have been fabricated and their operational characteristics have been investigated. Hydrogenated amorphous silicon nitride(a-SiN : H) films were used for the gate insulator and $n^{+}$-a-Si : H films were depostied for the source and drain contact. The thicknesses of a-SiN : H and a-Si : H films were $2000{\AA}$, respectively and the thickness of $n^{+}$-a-Si : H film was $500{\AA}$. Also the channel length and channel width of a-Si : H TFTs were $50{\mu}m$ and $1000{\mu}m$, respectively. The ON/OFF current ratio, threshold voltage, and field effect mobility of fabricated a-Si : H TFTs were $10^{5}$, 6.3 V, and $0.15cm^{2}/V{\cdot}s$, respectively.

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2003.11a
• /
• pp.99-100
• /
• 2003

This experiment was conducted to investigate the effect of restricted feeding to pullet on growth and laying Performance, e99 qualify and endocrine profile in brown layers. 1,080 brown-layer chicks divided to three diet treatments, conventional diet and two restricted diets, for 70 weeks. Conventional diets(C) was formulated by NRC recommendation, and one of restricted diet started from seven to seventeen week of age(T1), and the other started from twelve to seventeen(T2). Overall egg Production was the highest in T1 (P＜0.05) and there were not difference in C and T2. Average egg weight also showed similar to the tendency of egg production. Feed intake was higher in T1 during maximum production(P＜0.05), but there were not difference in all treatments after the peak. Overall feed conversion ratio improved in T1 compared to C and T1(p＜0.05). Egg shell thickness and egg shell strength tended to weak in aging, but there were not significant difference by treatments. Haugh unit also tended to similar to egg shell quality. Concentration of IGF-1 was influenced by feed intake. That of T1 maintained in low concentration compared to C during restriction period. The concentration of IGF-1 was decreased dramatically after the first egg. Estradiol concentration increased slightly at twelve week, and surged greatly near the first egg. Those of profile showed similar tendency of the first egg during laying period.

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2003.11a
• /
• pp.103-104
• /
• 2003

This experiment was conducted to investigate the effect of enhancement of protein, limit amino acid, Ca and P on egg Production and egg qualify in laying hens. 720 twenty five week of age (WOA) brown laying hen divided to two diet to seventy WOA. Conventional diet(control) formulated by NRC recommendation, 2,900 ME kcal/kg, 16.0 ％ crude protein, 0.768 ％ lysine, 0.332 ％ methionine, 3.5 ％ Ca and 0.275 available P. Enhanced diet(ED) formulated by increasing about ten percentage except ME and available P : 2,900 ME kcal/kg, 17.7 ％ crude protein, 0.845 ％ lysine, 0.368 ％ methionine, 3.99 ％ Ca and 0.275 available P. Overall egg Production were not difference by diets though the hens fed control diet tended to higher egg Production to sixty WOA. Average egg weight was heavier in the ED than control in all period(P＜0.05). Daily egg mass increased slightly in the ED, but there were not significantly difference. Average feed intake increased about 3g in the control compared to the ED. Feed conversion ratio significantly improved in the ED(P＜0.05). Egg shell breaking strength was stronger in ED by around sixty WOA and showed similar tendency after that. Egg shell thickness was certainly improved in ED. Haugh unit. egg shell color and egg yolk color were not difference by diets.

• Korean Journal of Materials Research
• /
• v.25 no.3
• /
• pp.125-131
• /
• 2015

Fluorine-doped $SnO_2$ (FTO) thin film/Ag nanowire (NW) double layers were fabricated by means of spin coating and ultrasonic spray pyrolysis. To investigate the optimum thickness of the FTO thin films when used as protection layer for Ag NWs, the deposition time of the ultrasonic spray pyrolysis process was varied at 0, 1, 3, 5, or 10 min. The structural, chemical, morphological, electrical, and optical properties of the double layers were examined using X-ray diffraction, X-ray photoelectron spectroscopy, field-emission scanning electron microscopy, transmission electron microscopy, the Hall effect measurement system, and UV-Vis spectrophotometry. Although pure Ag NWs formed isolated droplet-shaped Ag particles at an annealing temperature of $300^{\circ}C$, Ag NWs covered by FTO thin films maintained their high-aspect-ratio morphology. As the deposition time of the FTO thin films increased, the electrical and optical properties of the double layers degraded gradually. Therefore, the double layer fabricated with FTO thin films deposited for 1 min exhibited superb sheet resistance (${\sim}14.9{\Omega}/{\Box}$), high optical transmittance (~88.6 %), the best FOM (${\sim}19.9{\times}10^{-3}{\Omega}^{-1}$), and excellent thermal stability at an annealing temperature of $300^{\circ}C$ owing to the good morphology maintenance of the Ag NWs covered by FTO thin films.

• Biomolecules & Therapeutics
• /
• v.28 no.5
• /
• pp.414-422
• /
• 2020

Fangchinoline (FAN) is a bisbenzylisoquinoline alkaloid that is widely known for its anti-tumor properties. The goal of this study is to examine the effects of FAN on arthritis and the possible pathways it acts on. Human fibroblast-like synovial cells (FLS), carrageenan/kaolin arthritis rat model (C/K), and collagen-induced arthritis (CIA) mice model were used to establish the efficiency of FAN in arthritis. Human FLS cells were treated with FAN (1, 2.5, 5, 10 µM) 1 h before IL-1β (10 ng/mL) stimulation. Cell viability, reactive oxygen species measurement, and western blot analysis of inflammatory mediators and the MAPK and NF-κB pathways were performed. In the animal models, after induction of arthritis, the rodents were given 10 and 30 mg/kg of FAN orally 1 h before conducting behavioral experiments such as weight distribution ratio, knee thickness measurement, squeaking score, body weight measurement, paw volume measurement, and arthritis index measurement. Rodent knee joints were also analyzed histologically through H&E staining and safranin staining. FAN decreased the production of inflammatory cytokines and ROS in human FLS cells as well as the phosphorylation of the MAPK pathway and NF-κB pathway in human FLS cells. The behavioral parameters in the C/K rat model and CIA mouse model and inflammatory signs in the histological analysis were found to be ameliorated in FAN-treated groups. Cartilage degradation in CIA mice knee joints were shown to have been suppressed by FAN. These findings suggest that fangchinoline has the potential to be a therapeutic source for the treatment of rheumatoid arthritis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3800-3805
• /
• 2012

Infrared(IR) reflective black cool pigment and paint which is used for interior/exterior materials(IR reflectance >30%) to prevent heat island effect and to increase energy efficiency were studied. Cool pigment was synthesized using mixture of $Fe_2O_3$ and $Cr_2O_3$ with calcination from 900 to $1,200^{\circ}C$. Cool paint was prepared by formulation of cool pigment, acrylic resins, and other additives. Results showed that optimum color fixation of pigment obtained by mole ratio of Fe to Cr was 0.9 with calcination temperature at $1,000^{\circ}C$. The cool paint formulated by 20% pigment and 1.5% dispersive additive with $125{\mu}m$ thickness of coated layer showed optimum IR reflectance. Temperature difference on surface between cool paint and ordinary paint(STD) was $36.5^{\circ}C$ and IR reflectance(TSR) was 39.3% at wavelength from 700 to 2,500nm. And color change was not detected during 500hrs weathering test.

• Advances in nano research
• /
• v.5 no.4
• /
• pp.281-301
• /
• 2017

In this disquisition, an exact solution method is developed for analyzing the vibration characteristics of magneto-electro-elastic functionally graded (MEE-FG) beams by considering porosity distribution and various boundary conditions via a four-variable shear deformation refined beam theory for the first time. Magneto-electroelastic properties of porous FG beam are supposed to vary through the thickness direction and are modeled via modified power-law rule which is formulated using the concept of even and uneven porosity distributions. Porosities possibly occurring inside functionally graded materials (FGMs) during fabrication because of technical problem that lead to creation micro-voids in FG materials. So, it is necessary to consider the effect of porosities on the vibration behavior of MEE-FG beam in the present study. The governing differential equations and related boundary conditions of porous MEE-FG beam subjected to physical field are derived by Hamilton's principle based on a four-variable tangential-exponential refined theory which avoids the use of shear correction factor. An analytical solution procedure is used to achieve the natural frequencies of porous-FG beam supposed to magneto-electrical field which satisfies various boundary conditions. A parametric study is led to carry out the effects of material graduation exponent, porosity parameter, external magnetic potential, external electric voltage, slenderness ratio and various boundary conditions on dimensionless frequencies of porous MEE-FG beam. It is concluded that these parameters play noticeable roles on the vibration behavior of MEE-FG beam with porosities. Presented numerical results can be applied as benchmarks for future design of MEE-FG structures with porosity phases.

• Transactions of Materials Processing
• /
• v.30 no.6
• /
• pp.291-300
• /
• 2021

Currently, starting with electric vehicles, the application of ultra-high-strength steel sheets and light metals has expanded to improve mileage by reducing vehicle weight. At a time when internal combustion engine vehicles are rapidly changing to electric vehicles, the application of ultra-high-strength steel is expanding to satisfy both weight reductions and the performance safety of the chassis parts. There is an urgent need to improve the quality of parts without defects. It is particularly difficult to estimate the part formability through the finite element method (FEM) in the burring operation, so product design has been based on the hole expansion ratio (HER) and experience. In this study, design of experiment (DOE), analysis of variance (ANOVA), and regression analysis were combined to optimize the formability by adjusting the process variables affecting the burring formability of ultra-high-strength steel parts. The optimal variables were derived by analyzing the influence of variables and the correlation between the variables through FE analysis. Finally, the optimized process parameters were verified by comparing experiment with simulation. As for the main influence of each process variable, the initial hole diameter of the piercing process and the shape height of the preforming process had the greatest effects on burring formability, while the effect of a lower round of punching in the burring process was the least. Moreover, as the diameter of the initial hole increased, the thickness reduction rate in the burring part decreased, and the final burring height increased as the shape height during preforming increased.

• Korean Journal of Agricultural Science
• /
• v.46 no.3
• /
• pp.671-682
• /
• 2019

This study was conducted to evaluate the effects of rumen-protected methionine and lysine (RPML) on the growth performance, carcass characteristics, and meat properties of Hanwoo steers. Fourteen late fattening steers were randomly assigned to either the control (commercial concentrate + rice straw) or the treatment (commercial concentrate + rice straw + 20 g of RPML/head/day) group. The average daily gain (ADG) and feed conversion ratio (FCR) were not different between the treatment and control group. The rib eye area was slightly but not significantly higher in the treatment group than in the control group. The back fat thickness decreased with the RPML supplementation, although not significantly, and the appearance of yield C grade was lower in the treatment group than in the control group. The marbling score was similar between the control and treatment groups. The supplementation of RPML had no effect on the physicochemical compositions, myoglobin values, Commission Internationale de $l^{\prime}{\acute{E}}clairage$ (CIE) color values, fatty acid composition, and thiobarbituric acid reactive substances (TBARS) values in the longissimus muscle. Thus, the supplementation of RPML does not any negative effects on the growth performance, carcass characteristics, and meat properties of late fattening Hanwoo steers.