• 제목/요약/키워드: Thickness distribution

검색결과 2,275건 처리시간 0.031초

교차편광 촬영술(Cross Polarization Photographic Technique)를 이용한 부항요법의 배수혈 피부 색소 침착 변화 측정 평가 (A New Method For Measuring Acupoint Pigmentation After Cupping Using Cross Polarization)

  • 김수병;정병조;신태민;이용흠
    • Korean Journal of Acupuncture
    • /
    • 제30권4호
    • /
    • pp.252-263
    • /
    • 2013
  • 목적 : 부항요법은 국소적 부위를 진공상태로 유지시키는 과정 중 유두층 안의 표피혈관을 파괴됨에 따라 발생하는 색소, 응결, 자반, 수포, 압통 반응 등을 살피어 오장육부의 기능이상을 진단하고 있다. 시각에 의존하는 주관적인 혈색소 판별로 인한 진단방법에서 벗어나 정량적으로 측정 및 분석이 가능하기 위하여 교차편광 촬영술을 접목하였으며, 새로운 혈색소 평가 가능성을 확인하고자 하였다. 방법 : 족태양방광경의 좌/우 폐수(BL13), 심수(BL15), 간수(BL18), 신수(BL23) 총 10개에 80 kPa 의 음압으로 1분 동안 자극하였다. 교차편광 촬영술을 이용하여 부항 자극 직전과 60분 이후까지 2분마다 이미지를 획득하였다. 획득한 이미지에서 $L^*a^*b^*$ space로 변환하여 분석하였으며, RGB space에서 홍반지수 (E.I: erythema index)를 계산하여 분석하였다. 또한 부항 자극 전 각 경혈에서 젖산 농도를 측정하여 색 지표들간의 관계성 분석을 통하여, 근육의 상태와 부항 자극으로 유도된 피부 색 변화와의 관계를 확인하고자 하였다. 결과 : 교차편광 촬영술을 이용하여 획득한 이미지에서의 $L^*$, $a^*$ 그리고 E.I 모두 부항 자극에 따른 피부 색 변화를 정량적으로 나타낼 수 있는 유의한 지표임을 확인하였다. 부항 자극 40분 후에 피부 색 변화가 더 이상 관찰되지 않았다. 또한 각 경혈에서의 젖산 농도와 피부 색 변화 정도와 유의한 차이가 없음을 확인하였다. 결론 : 설진을 포함하여 한의학적 색 진단을 하기 위한 방법으로 교차편광 촬영술 활용 가능성을 확인하였다. 또한 $L^*$, $a^*$ 그리고 E.I 모두 색 지표로서 유의성을 확인하였다. 향후, 장부 기능 이상과 혈색소 반응간의 상관성을 확보하기 위한 연구가 진행하기 전에, 음압 도중 발생하는 조직 내 다양한 반응과 혈색소 반응간의 관계를 확보하고자 하는 노력이 우선적으로 진행되어야 한다.

포항-울산간의 점토자원의 지질과 그 물리화학적 특성에 관한 연구 (A Study on Geology of Clay Mineral Deposits of Pohang-Ulsan Area and their Physico-Chemical Properties)

  • 김옥준;이하영;김서운;김수진
    • 자원환경지질
    • /
    • 제4권4호
    • /
    • pp.167-215
    • /
    • 1971
  • I. Purpose and Importance of the Study The purpose of the present study is to clarify to geological, mineralogical, and physico-chemical properties of the clay minerals deposits imbedded in the Tertiary sediments in the areas between. Pohang and Ulsan along southeastern coastal region of Korea. These clays are being mined and utilized for filter and insecticide after activation or simple pulverizing, nontheless activated clays are short coming as chemical industry in Korea has been rapidly grown in recent years. In spite of such increase in clay demand, no goological investigation on clay deposits nor physico-chemical properties of the clays have been carried out up to date. Consequently activated clays produced in Korea is not only of low grade but also of shortage in supply, so that Korea has to import activated clays of better grade. The importance of the present study lies, therefore, on that guiding principle could be laid down by knowing stratigraphical horizons, of clay deposits and fundamental data of improving grade of activated clays might be derived from the results of physico-chemical examinations. II. Contents and Scope of the study The contents of the study are pinpointed down in the following two subjects: 1) General geological investigation of Tertiary formations distributed in the areas between Pohang and UIsan, and detail geological study of the bentonitic clay deposits imbedded in them. 2) To clarifty physico-chemical characteristics of the clays by means of chemical analysis, X-ray diffraction and electron microscope. The scope of the study involves the following there points: i) Regional geological investigation-This investigation has been carried out in order to find out the distribution of Tertiary sediments and exact location of clay mineral deposits in the areas between Pohang and UIsan. ii) Detail geological investigation-This has been concentrated in and around the clay deposits which. had been found out by the regional investigation. iii) Laboratory researchs include i) age determination and correlation of Tertiary sediments by paleontological study, and ii) Chemical analysis, X-ray diffraction, and electron microscopic studies on clays, samples taken from various clay deposits. III. Research Results and Suggestions 1) The geology of the area investigated is composed mainly of Janggi and Beomgokri groups of Miocene age in ascending order rested on the upper Silla system, Balkuksa granite and volcanic rocks of upper Cretaceous age as base. 2) Janggi group is composed in ascending order of Janggi conglomerate, Nultaeri rhyolitic tuff, Keumkwangdong shale, two beds of lignite-bearing formations which consist of alternation of conglomerate, sandstone and mudstone, and andesitic, rhyolitic, and basaltic tuff beds. 3) Beomgokri group is mainly composed of andesitic to rhyolitic tuff interlayered by conglomerate and tuffaceous sandstone. In the areas around boundary between North-and South Kyeongsang-do is distributed Haseori farmation which is composed of conglomerate, sandstone, mudstone and andesitic to rhyolitic tuff, and which is correlated to Eoilri formation of Janggi group. 4) Clay deposits of the area are interbedded in Eoilri, Haseori, Nultaeri tuff, Keumkwangdong shale, upper and lower horizon of the lower lignite-bearing seam, and Keumori rhyolitic tuff formations of Janggi group; and are genetically classi.fied into four categories, that is, i) those derived from volcanic ash beds(Haseori and Daeanri deposits), ii) those of secondary residual type from rhyolitic tuff beds(Seokupri deposits), iii) Clay beds above and beneath the lignite seams, (Janggi and Keumkwangdong deposits), and iv) those derived from rhyolitic tuff beds(Sangjeong and Tonghae deposits). 5) Mineral constituents of clay deposits are, according to X-ray diffraction, montmorillonite accompanied in different degree by cristobalite, plagioclase, quartz, stilbite, and halloysite in rare occasion. The clays are grouped according to mineral composition into four types; i) those consist mostly of montmorillonite, ii) those composed of montmorillonite and cristobalite, iii) those composed of montmorillonite and plagioclase, and iv) those composed of montmorillonite, plagioclase and quartz. 6) Clays interbedded in Haseori formation and vicinity of lignite seams belong to the first type, are of good quality and derived either from volcanic ash bed, or primary clay beds near lignite seams. Clays belonged to other types are derived from weathering of rhyolitic tuff formations and their quality varies depending upon original composition and degree of weathering. Few clays in secondary residual type contain small amount of halloysite. 7) Judging from analytical data, content of silica($SiO_2$) varies proportionally with content of cristobalite, and alumina($Al_2O_3$) content does not vary with that of plagioclase, but increases in the sedimentary bedded type of deposits. 8) It is unknown whether or not these days could be upgraded by beneficiation since no grain size of these impurities nor beneficiation test had been studied. 9) Clay beds derived from valcanic ash layers or sedimentary layers at the vicinity of lignite seams are thin in thickness and of small, discontinueous lenticular shape, although they are of good quality; and those derived from rhyolitic tuff formations or residual type from tuff are irregular in both occurrence and quality. It is, therefore, not only very difficult but also meaningless to calculate its reserve, and reserve estimation, even if done, will greatly be deviated from practically minable one. Consequently, way of discovery and exploitation of clay deposits in the area under consideration is to check the geologically favorable areas whenever needed.

  • PDF

포항분지 영일층군 이암층의 수리지질학적 차폐능 평가: 수은 모세관 압입 시험의 결과 분석을 중심으로 (Evaluation of Hydrogeologic Seal Capacity of Mudstone in the Yeongil Group, Pohang Basin, Korea: Focusing on Mercury Intrusion Capillary Pressure Analysis)

  • 김선옥;왕수균;이민희
    • 자원환경지질
    • /
    • 제53권1호
    • /
    • pp.23-32
    • /
    • 2020
  • 이산화탄소 지중저장은 대규모로 포집된 이산화탄소를 지하 심부의 지질구조 내로 주입하여 대기중 방출을 제한하려는 지구온난화 대응기술이다. 본 연구에서는 국내 최초의 이산화탄소 지중주입 실증 연구 지역인 포항분지의 지하 800 m 이하에서 시추된 심부 코어 시료를 대상으로 FE-SEM, XRD, XRF, MICP 등 분석을 수행하여 덮개암층을 구성하는 이암의 광물학적 특성을 규명하고 이산화탄소 지중저장의 안정성과 신뢰성에 직접적인 영향을 미치는 수리지질학적 차폐능을 정량적으로 평가하고자 하였다. 광물학적 분석 결과 포항분지 영일층군 이암층은 주로 석영, K-장석, 사장석과 소량의 황철석, 방해석, 점토 광물로 이루어져 있는 것으로 나타났다. 수은 모세관 압입 시험 분석 결과, 시료는 대체적으로 균일한 입자 구성과 공극 분포를 가지고 있었으며, 산정된 공극률과 공기 투과도 사이에서 뚜렷한 상관관계는 나타나지 않았다. 산정된 공극진입압력과 돌파압력을 적용한 허용가능 CO2 기둥 높이는 이산화탄소 주입 대상층의 두께에 비해 현저하게 높은 것으로 나타났다. 이러한 결과는 포항분지 영일층군의 이암층이 이산화탄소 지중저장 주입실증 사업에서 시범 주입되는 이산화탄소의 누출을 억제하기에 충분한 차폐능을 보유하고 있음을 보여주었다. 그러나, 본 연구의 결과는 제한된 수량의 시료를 분석·평가한 것으로서 그에 상응하는 제한된 의미를 지닌다. 따라서, 실제적인 이산화탄소 지중저장 과정에서 수행되는 덮개암층의 차폐능 평가를 위해서는 지층 전체 규모에 대한 다수의 시료 채취와 그에 대한 다면적 분석과 평가가 이루어져야 할 것으로 판단된다.

광도전체 필름 상부 전극크기에 따른 전기적 신호 특성 비교 (Comparison of Electrical Signal Properties about Top Electrode Size on Photoconductor Film)

  • 강상식;정봉재;노시철;조창훈;윤주선;전승표;박지군
    • 한국방사선학회논문지
    • /
    • 제5권2호
    • /
    • pp.93-96
    • /
    • 2011
  • 현재 광도전체 물질을 이용한 직접변환방식의 방사선 검출기 연구가 활발히 진행되고 있다. 이러한 광도전체 물질 중 상용화된 비정질 셀레늄(a-Se)에 비해 요오드화수은($HgI_2$) 광도전체 화합물은 고에너지에 대한 높은 흡수율과 민감도를 가지는 것으로 보고되고 있다. 또한 이러한 광도전체 필름은 발생된 신호의 검출효율은 상하부 전극크기에 의한 전기장의 세기 및 기하학적 분포에 많은 영향을 미치는 것으로 보고되고 있다. 이에 본 연구는 $HgI_2$ 광도전체 필름에서 상하부 전극의 크기에 따른 X선 검출특성을 조사하였다. 시편제작은 기존의 진공 증착법이 두꺼운 대면적 필름제조가 어렵다는 문제점을 해결하고자 페이스트 인쇄법을 이용하여 인듐전극이 코팅된 유리기관위에 제작하였으며, 시편의 두께를 $150{\mu}m$, 면적크기를 $3cm{\times}3cm$ 크기로 제조하였다. 상부전극은 마그네틱 스퍼터링법을 이용하여 $3cm{\times}3cm$, $2cm{\times}2cm$, $1cm{\times}1cm$의 크기로 ITO(indium-tin-oxide)를 진공 증착하였다. 특성평가를 위해 X선 선량에 대한 민감도와 누설전류, 신호대잡음비를 측정하여 필름의 전기적 검출 특성을 정량적으로 평가하였다. 그 결과 상부전극의 크기가 증가함에 따라 검출된 신호의 크기가 다소 증가하는 경향을 보였다. 하지만, 전극크기의 증가에 따른 누설전류 또한 증가함으로써 신호대잡음비는 오히려 감소하는 것을 확인할 수 있었다. 이러한 결과로부터 향후 광도전체를 적용한 X선 영상검출기 개발에 있어 상부전극의 최적크기와 구조설계가 고려되어야 할 것으로 사료된다.

정규화LPI와 전단파 속도의 상관관계를 활용한 서울과 경주 지역 액상화 위험도 평가 (Assessment of Liquefaction Potential Using Correlation between Shear Wave Velocity and Normalized LPI on Urban Areas of Seoul and Gyeongju)

  • 송영우;정충기;박가현;김민기
    • 대한토목학회논문집
    • /
    • 제38권2호
    • /
    • pp.357-367
    • /
    • 2018
  • 최근 경주와 포항에서 발생한 지진으로 국내에서 액상화 현상에 대한 관심이 커지고 있다. 지반의 액상화는 포화된 상태에서 지진과 같은 동하중을 받았을 때 과잉간극수압이 발생하여 흙이 강도를 상실하고 물과 같이 거동하는 현상이며 지반 침하와 상부구조물의 전도와 같은 심각한 문제를 야기한다. 따라서 액상화 발생 가능성을 미리 파악하고 대비할 필요가 있다. 액상화의 발생 가능성과 액상화 피해 정도는 일반적으로 액상화 가능 지수(Liquefaction Potential Index, LPI)에 의해 정량적으로 평가된다. LPI의 계산은 시추공 별로 이루어지며 지반응답해석이 필수적인 작업으로 선행되어 많은 시간과 노력이 필요하다. 본 연구에서는 다양한 지하수위 분포를 가지는 넓은 지역의 액상화 평가를 간단히 수행할 수 있도록 전단파 속도와 LPI의 상관관계를 이용한 액상화 평가 방법을 제안하였다. 제안된 방법은 액상화 가능 층의 평균 전단파 속도(${\bar{V}}s^{\prime}liquefiable$)와 액상화 가능 층의 두께로 나누어 정규화한 정규화 LPI의 상관관계를 분석하여 지하수위 별로 다양한 암반노두가속도에 대해 적용 가능한 상관관계식을 제시하고 이용한다. 상관관계를 이용한 액상화 평가 방법의 적용성을 확인하기 위해 서울특별시의 104개 시추조사자료를 이용하여 지하수위 0m, 1m, 2m, 3m에 대해 상관관계식을 제시하였으며 제시한 상관관계식을 이용하여 서울특별시와 경주시의 액상화 발생 가능성을 평가하였다. 지반응답해석을 이용해 계산한 LPI와 상관관계식을 이용해 계산한 LPI를 비교하였으며 제안된 액상화 평가 방법의 적용성을 확인하였다. 마지막으로 제안된 액상화 평가 방법에 따라 결정된 LPI의 분포를 지구통계학적 기법인 크리깅을 통해 지도로 나타내었다.

선형가속기 10 MV 광자선에서 산란판(Beam Spoiler) 사용 시 표면선량 변화 (The Variation of Surface Dose by Beam Spoiler in 10 MV Photon Beam from Linear Accelerator)

  • 배성철;김준호;이철수
    • 대한방사선치료학회지
    • /
    • 제18권1호
    • /
    • pp.21-28
    • /
    • 2006
  • 목 적: 10 MV X-선의 선형가속기를 이용하여 두경부종양 및 임파선 전이 환자를 치료할 시 피부표면 종양에 균일한 선량을 부여하기 위하여 조직 등가물질로 산란판을 제작하였으며 팬톰을 이용한 피부선량을 측정하여 그 효과를 평가하였다. 대상 및 방법: 조직 등가 물질인 lucite로 산란판을 제작하여 가속기의 콜리메이터와 피부사이에 부착하였으며 조사면적의 크기($5{\times}5{\sim}30{\times}30cm^2$)와 산란판 두께 및 피부와 산란판 간의 거리에 따른 피부 및 체표 0.4 cm에서의 선량 변화를 측정하였다. 또한 자체 제작한 산란 판의 체표 선량 증강 효과를 평가하기위해 볼루스를 이용한 체표 선량을 측정하여 그 효과를 비교하였다. 결 과: 10 MV X-선 선형가속기와 피부 사이에 산란판을 설치하여 피부선량이 증가 되었으며 산란판의 위치에 따라 피부선량이 변화되었고, 0.4 cm 깊이의 선량과 최대선량지점이 피부표면쪽으로 이동하였다. 산란판이 일정할 경우 조사면적이 커질수록 표면선량이 증가하고 최대 선량점은 피부표면 방향으로 이동하였다. 또한 산란판의 두께가 두꺼울수록 표면선량이 증가하고 최대 선량점은 피부표면 방향으로 이동하였다. 결 론: 10 MV X-선을 이용하여 두경부 종양 및 임파선 전이 암을 치료할 경우 산란판을 이용하여 이차산란 전자를 피부표면 앞에서 발생시킴으로써 표면근접부의 선량을 증가시켜 종양부위에 균일한 선량을 조사할 수 있었다. 본 연구에서는 조사면적에 따라 적정 산란판 조건을 찾아 임상에서 유용하게 사용하고자 하였으며, 1.2 cm, 1.8 cm 두께의 산란판을 피부로부터 7 cm에 위치 시켰을때 $10{\times}10cm^2$ 조사면적의 표면선량이 각각 60%, 64%로 측정되었고, 0.4 cm 깊이의 선량이 94%, 94%로 가장 이상적으로 관찰되었다.

  • PDF

COATED PARTICLE FUEL FOR HIGH TEMPERATURE GAS COOLED REACTORS

  • Verfondern, Karl;Nabielek, Heinz;Kendall, James M.
    • Nuclear Engineering and Technology
    • /
    • 제39권5호
    • /
    • pp.603-616
    • /
    • 2007
  • Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.

호도나무 '영동' 품종 과피의 물리적 특성 (Physical Properties of Pericarp in a Walnut Cultivar, 'Yongdong')

  • 이욱;이문호;변광옥;정명석
    • 한국산림과학회지
    • /
    • 제96권4호
    • /
    • pp.455-461
    • /
    • 2007
  • 호도나무 '영동' 품종에 대한 과실의 형태적 특성 및 과피의 물리적인 특성을 조사한 결과, (1) '영동' 품종 과실의 형태적인 특성은 모든 형질에 대해 비교종인 재래종과 통계적으로 매우 유의하게 나타났다. (2) 과실의 입중 및 인중, 크기와 관련된 형질, 봉합선의 길이와 폭, 인의 품질 등 9개 항목에서 '영동' 품종이 재래종보다 크게 나타난 반면 봉합선 돌출높이, 과피 및 격막두께, 인 추출 시 단편개수, 구형지수 등 6개 항목은 재래종이 높은 수치를 보였다. (3) 과피의 물리적 특성은 압축 프로브의 이동거리를 제외한 모든 항목에서 '영동' 품종이 우수하였으며 봉합선방향의 압축이 가장 작은 힘이 소요되어 깐호도 생산에 효과적이었다. (4) 최대압축하중에 관해 '영동' 품종이 21.9 kg으로 재래종 42.6 kg보다 약 2배정도로 낮아 과피가 적은 힘으로도 쉽게 깨지는 특성을 지녀 깨짐성이 우수하였다. (5) 항복치를 조사한 결과, 재래종이 '영동' 품종보다 2배 이상 높아 과피의 탄성이 적고 딱딱한 특성을 보인 반면 '영동' 품종의 봉합선 또는 종경방향의 항복치가 평균 15.6 kg과 16.0 kg으로 가장 낮아 과피가 쉽게 깨졌다. (6) '영동' 품종의 압축 프로브의 이동거리는 평균 4.2 mm로 재래종 2.7 mm보다 길었으며 이동거리가 길수록 최대압축하중이 낮은 반면 탄성이 우수함에 따라 유통과정에서 발생할 수 있는 손실량이 감소됨에 따라 상품적 가치가 높아질 것으로 판단된다. (7) '영동' 품종의 봉합선 방향의 압축강도가 $9.1kg/cm^2$로 전체 평균 $12.4kg/cm^2$보다 낮았으며 나머지 처리의 압축강도에 비해 매우 낮고 통계적으로도 유의성이 인정되었다. (8)압축부위별 경도를 측정한 결과, '영동' 품종의 봉합선방향이 $149.8kg/cm^2$로 가장 낮은 반면 재래종 두께방향이 $300.9kg/cm^2$로 가장 높게 나타났다.

새로운 날개단면을 이용한 KD-프로펠러 씨리즈 개발 (Development of KD- Propeller Series using a New Blade Section)

  • 이진태;김문찬;안종우;김호충
    • 대한조선학회논문집
    • /
    • 제28권2호
    • /
    • pp.52-68
    • /
    • 1991
  • 캐비테이션 특성이 우수하고 넓은 받음각에서 양력-향력비가 큰 새로운 날개단면(KH18 단면)을 사용하여 체계적인 방법으로 기하학적 형상을 변화시켜 설계된 새로운 계열 프로펠러의 개발을 시도하였다. 새로운 계열 프로펠러의 형상을 설계함에 있어 기존의 계열 프로펠러와는 달리 선택된 반류분포의 회전방향 평균 반류분포를 입력자료로 하여 반경방향 부하분포와 코오드 방향 부하분포를 동일하게 유지하면서 피치 및 캠버의 형상을 결정하였다. 또한 코오드 길이, 두께, 스큐 및 레이크 분포와 같은 형상은 최근 실적선 프로펠러의 형상 특성을 정형화하여 선택되었기 때문에 초기설계시 설계된 형상이 최종 설계 프로펠러의 형상과 크게 다르지 않을 것으로 생각되어 초기성능을 보다 정확하게 추정할 수 있게 하였다. 설계된 계열 프로펠러는 날개수 4개인 프로펠러를 대상으로 날개 전개면적비 4개($A_{E}/A_{O}$=0.3, 0.45, 0.6, 0.75)에 대하여 각 전개면적비에서 평균피치비를 5개(P/D=0.5, 0.65, 0.8, 0.95, 1.1)로 변화시켜 총 20개의 프로펠러로 구성되었으며 KD-프로펠러 씨리즈(KRISO-DAEWOO Propeller Series)라 명명하였다. 설계된 계열 프로펠러들에 대하여 단독특성시험, 캐비테이션 관찰시험, 변동압력 계측시험을 수행하였다. 프로펠러 단독특성 시험결과의 회귀해석결과로 부터 $B_{P}-\delta$ 곡선을 도출하여 초기설계 단계에서 최적 프로펠러 직경등을 쉽게 결정할 수 있게 하였다. 기준으로 선택된 반류분포(2700TEU 콘테이너선의 반류) 후류에서 프로펠러 추력계수 및 캐비테이션 수를 체계적으로 변화시킨 상태에서 캐비테이션 관찰시험 및 변동압력계측시험을 수행하였다. 양력면이론에 의한 비정상 프로펠러 성능해석에 의해 계산된 최대 국부양력계수 ($C^{max}_{l,0.8R}$)와 국부캐비테이션 수(${\sigma}_0=\frac{p-p_v}{\frac{1}{2}{\rho}V^2_{0.8R}}$)를 기준으로 캐비테이션 관찰시험 결과를 정리하여 KD-캐비테이션 챠트를 도출하였다. 기존의 캐비테이션 챠트는 균일류중의 시험 결과를 정리하여 작성되었으나 KD-캐비테이션 챠트는 반류분포중에서 시험된 프로펠러 관찰시험 결과로 부터 도출되었으므로 초기설계 단계에서 보다 정확한 캐비테이션 발생량 추정이 가능하리라 예상된다.

  • PDF

Perfluoropolymer Membranes of Tetrafluoroethylene and 2,2,4Trifluofo- 5Trifluorometoxy- 1,3Dioxole.

  • Arcella, V.;Colaianna, P.;Brinati, G.;Gordano, A.;Clarizia, G.;Tocci, E.;Drioli, E.
    • 한국막학회:학술대회논문집
    • /
    • 한국막학회 1999년도 The 7th Summer Workshop of the Membrane Society of Korea
    • /
    • pp.39-42
    • /
    • 1999
  • Perfluoropolymers represent the ultimate resistance to hostile chemical environments and high service temperature, attributed to the presence of fluorine in the polymer backbone, i.e. to the high bond energy of C-F and C-C bonds of fluorocarbons. Copolymers of Tetrafluoroethylene (TEE) and 2, 2, 4Trifluoro-5Trifluorometoxy- 1, 3Dioxole (TTD), commercially known as HYFLON AD, are amorphous perfluoropolymers with glass transition temperature (Tg)higher than room temperature, showing a thermal decomposition temperature exceeding 40$0^{\circ}C$. These polymer systems are highly soluble in fluorinated solvents, with low solution viscosities. This property allows the preparation of self-supported and composite membranes with desired membrane thickness. Symmetric and asymmetric perfluoropolymer membranes, made with HYFLON AD, have been prepared and evaluated. Porous and not porous symmetric membranes have been obtained by solvent evaporation with various processing conditions. Asymmetric membranes have been prepared by th wet phase inversion method. Measure of contact angle to distilled water have been carried out. Figure 1 compares experimental results with those of other commercial membranes. Contact angles of about 120$^{\circ}$for our amorphous perfluoropolymer membranes demonstrate that they posses a high hydrophobic character. Measure of contact angles to hexandecane have been also carried out to evaluate the organophobic character. Rsults are reported in Figure 2. The observed strong organophobicity leads to excellent fouling resistance and inertness. Porous membranes with pore size between 30 and 80 nanometers have shown no permeation to water at pressures as high as 10 bars. However high permeation to gases, such as O2, N2 and CO2, and no selectivities were observed. Considering the porous structure of the membrane, this behavior was expected. In consideration of the above properties, possible useful uses in th field of gas- liquid separations are envisaged for these membranes. A particularly promising application is in the field of membrane contactors, equipments in which membranes are used to improve mass transfer coefficients in respect to traditional extraction and absorption processes. Gas permeation properties have been evaluated for asymmetric membranes and composite symmetric ones. Experimental permselectivity values, obtained at different pressure differences, to various single gases are reported in Tab. 1, 2 and 3. Experimental data have been compared with literature data obtained with membranes made with different amorphous perfluoropolymer systems, such as copolymers of Perfluoro2, 2dimethyl dioxole (PDD) and Tetrafluorethylene, commercialized by the Du Pont Company with the trade name of Teflon AF. An interesting linear relationship between permeability and the glass transition temperature of the polymer constituting the membrane has been observed. Results are descussed in terms of polymer chain structure, which affects the presence of voids at molecular scale and their size distribution. Molecular Dyanmics studies are in progress in order to support the understanding of these results. A modified Theodoru- Suter method provided by the Amorphous Cell module of InsightII/Discover was used to determine the chain packing. A completely amorphous polymer box of about 3.5 nm was considered. Last but not least the use of amorphous perfluoropolymer membranes appears to be ideal when separation processes have to be performed in hostile environments, i.e. high temperatures and aggressive non-aqueous media, such as chemicals and solvents. In these cases Hyflon AD membranes can exploit the outstanding resistance of perfluoropolymers.

  • PDF