• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.6
• /
• pp.58-65
• /
• 2007

The arbitrarily-bended pipe is widely used in a heat exchanger system. Thus, the pipe bending process has important role in performance and productivity of heat exchanger system. The purpose of this study is to investigate the bending process for manufacturing of sound pipe. And, the spring-back effect and the variation of pipe thickness should be controlled effectively. The change of spring-back ratio and the thickness variation of pipe according to the change of bending radius, bending angle and pipe thickness are analyzed by FEM analysis. The analytic results are compared with the experimental data, accordingly the results show good agreement. The method of the analysis can be applied for manufacturing of precision bended pipe.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.789-792
• /
• 2004

This study aims to detect only voids and estimate the cross-sectional size and thickness of voids using radar. A new method based on radar image processing is carried out with various void sizes and depths. The regression relationship between void size which has different depth and the amplitude characteristics of the radar return is considered in a new method of this research. For the purpose of examining; this regression relationship, experiments with change of void depth, surface area and thickness were carried out. Finally, the threshold value for image processing which aims to represent only voids to be fitted size (width) can be obtained. As the results, a proposed method in this study has a possibility of detecting only voids and estimating void size and thickness with good accuracy.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.555-558
• /
• 2004

The efficiency of electron injection from the cathode is strongly dependent on the thickness of the LiF buffer-layer. We used LiF to electron Injection layer. We compared characteristics of organic light emitting device changing LiF thin film thickness from 1.0 m to 10.0 nm. Experiment result, we found that LiF thickness has the optimized electrical characteristics in 3.0 m. In this paper, we did research about electrical characteristics of organic light emitting device by LiF thickness change using method numerical analysis method. We proved adequate experimental results that compare results of numerical analysis, and come out through an experiment results is validity.

• PNF and Movement
• /
• v.20 no.1
• /
• pp.1-8
• /
• 2022

Purpose: The purpose of this study was to investigate the effect of blood flow restriction bridge exercise on leg muscle thickness and balance. In addition, it is to promote blood flow restriction exercise as the basis for early prevention, diagnosis, and treatment of sarcopenia in clinical practice. Methods: Twenty elderly women aged 65 years or older were selected to participate in this study. The subjects were divided into two groups of 10: one with blood flow restriction with bridge exercise (BFRG) and the other with bridge exercise alone (BG). As for the exercise method, the thickness of rectus femoris and vastus medialis and Berg balance scale were investigated by intervention for 30 minutes a day, 3 times a week, for a total of 6 weeks. Results: There was significant difference in the thickness of the rectus femoris and vastus medial and within-group changes in the Berg balance scale (p <0.05) before and after the experiment in the BFRG and BG groups (p<0.05). There was a significant difference in change between the two groups (p <0.05). Conclusion: There was a significant difference in the intragroup change of the Berg balance scale in the BFRG before and after the experiment, but there was no significant difference in the BG, and there was no significant difference in the change between the two groups.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.2
• /
• pp.95-101
• /
• 2007

This paper presents the feasibilityof a thickness mode piezoelectric oscillator to detect damages in structures. The thickness mode oscillator sensor is composed of an electronic feedback oscillator circuit and a piezoelectric thickness mode vibrator to be attached to a structure of interest. Damage to the structure causes a change in the impedance spectrum of the structure, which results in a corresponding change of a resonant frequency of the structure. The oscillator sensor can instantly detect the frequency change in a very simple manner. Feasibility of the piezoelectric oscillator sensor was verified with a sample aluminum plate where artificial cracks of different lengths and number were imposed in sequence. Validity of the measurement was confirmed through comparison of the experimental data with the results of finite element analyses of a plate with cracks.

• Journal of Technologic Dentistry
• /
• v.30 no.2
• /
• pp.47-56
• /
• 2008

This is a research for thickness change of denture base according to the shape of sprue & investment position of denture base in flask when injecting polyamid base resin for flexible partial denture as a part of study for Valplast among the flexible partial denture with a nylon base. It has been introduced several kinds of flexible partial denture product with a nylon base, but Valplast is the most widely used product among them. Valplast has been the most generally used material today since developed in 1950s in the United States as a material for flexible partial denture. Valplast is much more aesthetic than general metal-acrylic partial denture due to its translucent pink color and biocompatibility in terms of material characteristic. It keeps its flexibility for a long time after production, imposes a less burden on the teeth used as abutment, and it can be easily insert and remove due to its particular suppleness. Moreover, it is felt like real teeth more than metal-acrylic partial denture when being put in and takes alveolar bone under good protection since it receives occlusal force equally under the denture base. The most outstanding feature of Valplast is flexibility. The extent of its flexibility is determined by width & thickness of denture base. Considering general working procedure of Valplast, it can be seen that the thickness of denture base formed out of wax is increasing by the pressure while injecting resin. This research is to decide and test on the thickness increasing of Valplast by injecting pressure and the hypothesis upon that and is to prepare the basis estimating the increasing extent of thickness of denture base on the basis of the test result. In this test, it is expected occlusal malposition & thickness increasing of denture base by injecting pressure according to 4 kinds of test data which are to select 3 types of sprue method settling the forefront position at which the test material of fixed standard can be invested and to position the test material at the rearmost part keeping the minimum distance to set sprue. For 4 kinds of injecting test by investment position & sprue type, 20 test materials, 5 for each test were produced and a pressure of 1,180Kg was given with automatic injector of air cylinder type. The results are as follows: 1. For the amount of thickness increasing of denture base by investment position, the thickness of front investment is less increasing than the one of rear investment. 2. For the amount of thickness increasing of denture base by sprue type, the thickness of straight decompression sprue type which can absorb the injecting pressure after injecting polyamide base resin is less increasing than the other sprue types.

• Journal of The Korean Society of Integrative Medicine
• /
• v.8 no.1
• /
• pp.67-76
• /
• 2020

Purpose : The purpose of this study was to provide more effective interventions for elderly men with weak core muscles by measuring the thickness of the muscles according to the five core stabilization exercise and comparing the thickness differences in muscles in each posture. Methods : The study selected 29 elderly men aged 65 to 80 years old among outpatient patients at S Medical Center in B city, and measured the muscle thickness by exercise posture once. In order to find out the thickness of the external oblique (EO), internal oblique (IO), and transverse abdominis (TrA) muscles were measured by using rehabilitative ultrasound imaging (RUSI) in five exercise conditions. Results : A significant change in the thickness of the EO muscles in each group was measured by the method of motion, followed by the abdominal crunches (1.67±0.15), the lower body rotations (1.54±0.07). As a result of measuring the thickness of the IO muscles of each group according to the exercise method, the bridge group (1.14±0.22) was the highest, followed by the abdominal drawing group (1.05±0.03). As a result of measuring the thickness of the TrA muscles of each group according to the exercise method, the abdominal crunches (0.98±1.00) were the highest, and the bridge group (0.57±0.05) were higher in order of magnitude. Conclusion : Consequently, the five core stabilization exercises all affect changes in abdominal thickness and are expected to continue to require training studies on muscle posture.

• Journal of Korean Biological Nursing Science
• /
• v.3 no.2
• /
• pp.91-103
• /
• 2001

The bone is composed of the bone matrix of collagen and hydroxyapatite, the mixture of calcium and phosphours. The bone tissue is considered to the special connective tissue that possesses extracellular matrix made by collagen fiber deposited with mineral complex. In order to maintain bone mass measured by the sum of bone matrix and hydroxyapatite, bone resorption by osteoclast during lifetime and bone remodeling to form bone by osteoblast in its resorption region repeat continuously. The osteoblast has a mesodermic fetal origin like fibroblast for the formation of form tissues. Two cells express identical genes and synthesize the identical collagen type I as the major component of the formation of bone matrix and skin. Therefore, it is considered that the decrease of skinfold thickness and the decrease of bone mass related to the age, the change of two tissues composed of collagen type I is caused by the same genetic mechanism. The decrease of bone mass is caused by the change of the amount and structure of bone matrix by several factors and the amount of minerals deposited on bone matrix. Especially, in case of female, the deficiency of estrogen by menopause makes these changes rapidly increased. The decrease of bone mass and skinfold thickness is due to the decrease of the amount of collagen and its structural change the common component of bone tissue and skin tissue. Therefore, the relationship of the amount of cross-linked peptide N-telopeptide, collagen metabolite which excretes as urine. Based upon the proved results about the significant relationship of bone mass, the amount of bone collagen, the amount of skin collagen and skinfold thickness, the bone mass may be expected through a facile determination of skinfold thickness.

• Journal of the Korean Society of Radiology
• /
• v.12 no.1
• /
• pp.17-22
• /
• 2018

Multilayer mirrors are optical elements that can replace single crystal optical elements such as silicon or germanium, and they have artificial diffraction plane of a thickness of several nanometers. We examined the first Bragg angle and the reduction of reflectivity by variation of layer thickness in a W/Si multilayer mirror of small d-spacing. A W/Si multilayer mirror for an incidence angle of $0.55^{\circ}$ and an energy of 17.5 keV was designed and showed a maximum reflectivity of 72.67%. When the thickness of tungsten or silicon layer was simultaneously changed, the first Bragg angle was shifted and the reflectivity was reduced. When there was a change in thickness for one layer of W/Si multilayer, no change in the reflectivity was showed but the unevenness of the envelope was observed. Reduction of reflectivity was also observed at random Gaussian thickness variations. It is possible to predict the tolerance of multilayer mirror by examining the reflectivity degradation according to the thickness change in the W/Si multilayer mirror of small d-spacing.

• Tribology and Lubricants
• /
• v.33 no.3
• /
• pp.119-125
• /
• 2017

In this study, we perform a numerical analysis to predict the film thickness and lubrication regions for a thrust ball bearing under different operating conditions. Film thinning and replenishment affect the film thickness in starved lubrication. As the inlet meniscus position is brought to the edge of the Hertz contact, the thin film thickness is calculated as starved equation. We use a film replenishment model to determine the recovery film thickness between rolling elements. We use a hydrodynamic model to describe film recovery, that results from the effects of surface tension. In this model, we consider the surface tension gradient in fluid depression as the driving force for fluid recovery. We use Fourier transform method to determine the time-dependent depth of depressed oil. We calculate the change in the central film thickness graphically by using the recovery equation in starved elastohydrodynamic lubrication(EHL) under operating conditions that include numbers of balls, sliding velocity, applied force, and ambient film thickness. We evaluate the degree of starvation by using the distance from the center of the contact area to the meniscus position. Parched lubrication, a phenomenon where the film thickness decreases consistently, occurs at the severe condition. We determine optimal values with respect to the numbers of balls, and sliding velocity. The investigation can contribute to the design operating conditions for proper lubrication.