• The Korean Journal of Mycology
• /
• v.35 no.1
• /
• pp.47-53
• /
• 2007

In this study, we investigated the properties of incubation and growing of Pleurotus eryngii in addition to the mycological properties to use them as basic data for breeding. The speed of mycelial growth on the MCM was faster than on the PDA. The biomass in the PDB broth culture was higher than in the MCM and YMG broth culture. KNR2515 and KNR2516 required 19 days for growth of mycelia on commercial sawdust media. KNR2503 required 6.5 days and 15.3 days for pin-heading and harvesting, respectively. In morphological properties by the mushroom, the heights of KNR2312 and KNR2322 were 122.7 and 121.0 mm, respectively. The thickness of KNR2322 and KNR2513 were 39.8 mm and 31.3 mm, respectively. The weight of KNR2524's fruiting body was 36.3 g, which is good as wild strain. The quality of fruiting body of KNR2503 was 4.0 in comparison to the score 7 of commercially cultivated strains. KNR2512 had the darkest color of pileus with L value 43.6. The slow growing strains, KNR2511, KNR2513, and KNR2512 had the bright pileus with L value 80. In morphological characteristics, KNR2511, KNR2513, and KNR2515 had white lamellar and plane pileus. The three strains are supposed to be the same group and KNR2516 and KNR2518 appeared to be related to the group. The commercially cultivated strains had convex pileus, KNR2502, KNR2503, KNR2504, KNR2521, and KNR2525 had infundibuliform, and the other strains had plane pileus. Several strains were valuable for breeding, JNR2503 for growth rate, KNR2512 for pileus color, and KNR2312, KNR2322, KNR2503, and KNR2513 for the quality.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.3
• /
• pp.202-223
• /
• 2020

This purpose of this article is to identify the original form of the gilt-bronze ornamental pieces unearthed from the east part of the third wooden coffin in the Naju Bogam-ri Jeongchon (NBJ) tombs. The gilt-bronze ornamental pieces were all small, measuring less than 3cm in size and about 0.2cm in thickness, and only 19 or more small pieces were identified. In each piece of gilt decoration, a circular perforation, convex pattern, leaf-shaped spangle (瓔珞), 2 small holes for attaching spangles and gilt-bronze thread, 2 small holes for unknown purposes, and a continuous dot pattern of about 0.05 cm can be observed. As a result, it was judged that the gilt-bronze pieces excavated from the NBJ No. 1 chamber were part of the Headband Crown. Therefore, type 1 and type 3 of the gilt-bronze pieces were determined to be part of the Headband, and type 2 to be part of the Vertical Ornaments. Based on previous results, two types of restoration were proposed for NBJ No. 1 tomb gilt-bronze ornaments. In the first restoration proposal, there are wave-shaped dot patterns on the top and bottom of the crown, and the middle decoration is a spangle, circular perforation and spangle and a convex-pattern. In the second restoration plan, one row of convex patterns was added among the decorations in the middle of the first. The same type of vertical ornament was found in the Sochang (小倉) collection crown, but the overall structure and shape of the crown were completely different. On the other hand, the use of small holes of unknown use, as seen in the crown, was presumed to represent holes for fixing to a cap of organic matter. The restored NBJ No. 1 tomb gilt-bronze crown is characterized by circular punching, which makes it difficult to find an analogy in the other Three Kingdoms-period crowns. Unlike the existing halls in Gaya, Mahan, and Baekje, each district has a unique shape and decoration. The gilt-bronze crown excavated from NBJ No. 1 tomb is thought to reflect these characteristics.

• Journal of the Mineralogical Society of Korea
• /
• v.31 no.1
• /
• pp.47-55
• /
• 2018

Talc, hydrous magnesium phyllosilicate, is one of the most popular industrial minerals due to their chemical stability and adsorptivity. While micro-sized talc has long been used as a filler and coating, nano-sized talc recently is attracting attention as additives for improving the stability of nanocomposites. In this study, we produced the nano-sized talc powder by mechanical method using high energy ball mill and investigated the changes in particle size and crystallinity with increasing milling time up to 720 minutes. X-ray diffraction results show that the peak width of talc gradually as the milling proceeded, and after 720 minutes of pulverization, the talc showed an amorphous-like X-ray diffraction pattern. Lase diffraction particle size analysis presents that particle size of talc which was ${\sim}12{\mu}m$ decreased to ${\sim}0.45{\mu}m$ as the milling progressed, but no significant reduction of particle size was observed even after grinding for 120 minutes or more. BET specific surface area, however, steadily increases up to the milling time of 720 minutes, indicating that the particle size and morphology change steadily as the milling progressed. Scanning electron microscope and transmission electron microscope images shows that layered particles of about 100 to 300 nm was aggregated as micro-sized particles after pulverization for 720 minutes. As the grinding time increases, the particle size and morphology of talc continuously change, but the nano-sized talc particles form micro sized agglomerates. These results suggest that there is a critical size along the a, b axes in which the size of plates is reduced even though the grinding proceeds, and the reduction of plate thickness along the c axis leads the increase in specific surface area with further grinding. This study could enhance the understanding of the mechanism of the formation of nano-sized talc by mechanical grinding.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.4
• /
• pp.334-340
• /
• 2003

This study was conducted to evaluate the effects of dietary herbal extracts mixture on the growth rate. carcass traits and serological changes in finishing pigs. For the Exp 1, eighty Duroc(Yorkshir(Landrace pigs(81.58$\pm$3.20kg average initial body weight) were used in a 45 day experiment. Dietary treatments included 1) NC(negative control; antibiotics-free diet), 2) PC(positive control; NC diet added 0.1% of chlortetracycline), 3) NCM(NC diet added 0.1% of herbal plant mixture) and 4) PCM(PC diet added 0.1% of herbal plant mixture). Through the entire experimental period, ADG of pigs fed NCM and PCM diets was greater(P<0.08) than that of pigs fed NC diet. There was interaction of ADG(P<0.01) in pigs fed NC diet with herbal plant mixture compared to pigs fed PC diet with herbal plant mixture. ADFI and G/F tended to increase in PC and NCM treatments. However, there were not significantly differences among the treatments. Total protein of serum was improved by supplementation of the herbal plant mixture in NC diet(P<0.04). For the Exp 2. one hundred Duroc(Yorkshir(Landrace pigs(77.36$\pm$2.01kg average initial body weight) were used in a 28 day experiment. Dietary treatments included 1) NC(negative control; antibiotics-free diet), 2) PC(positive control; NC diet added 0.1% of chlortetracycline), 3) PM0.1(NC diet added 0.1% of herbal plant mixture) and 4) PM0.2(NC diet added 0.2% of herbal plant mixture). Through the entire experimental period, ADG tended to increase in PC treatment. However, there was not significantly difference among the treatments. Carcass weight in NC was higher than other treatments(P<0.06). Backfat thickness was higher in pigs fed PC than other treatments. However, there was not significantly difference among the treatments. A grade appearances of carcass tended to increase in pigs fed PM(P<0.09). In conclusion, the results of the experiments suggest that pigs fed PM could be a beneficial growth performance and serogical immunity for finishing pigs.

• Electrical & Electronic Materials
• /
• v.12 no.7
• /
• pp.7-11
• /
• 1999

Fully sealed field emission display in size of 4.5 inch has been fabricated using single-wall carbon nanotubes-organic vehicle com-posite. The fabricated display were fully scalable at low temperature below 415$^{\circ}C$ and CNTs were vertically aligned using paste squeeze and surface rubbing techniques. The turn-on fields of 1V/${\mu}{\textrm}{m}$ and field emis-sion current of 1.5mA at 3V/${\mu}{\textrm}{m}$ (J=90${\mu}{\textrm}{m}$/$\textrm{cm}^2$)were observed. Brightness of 1800cd/$m^2$ at 3.7V/${\mu}{\textrm}{m}$ was observed on the entire area of 4.5-inch panel from the green phosphor-ITO glass. The fluctuation of the current was found to be about 7% over a 4.5-inch cath-ode area. This reliable result enables us to produce large area full-color flat panel dis-play in the near future. Carbon nanotubes (CNTs) have attracted much attention because of their unique elec-trical properties and their potential applica-tions [1, 2]. Large aspect ratio of CNTs together with high chemical stability. ther-mal conductivity, and high mechanical strength are advantageous for applications to the field emitter [3]. Several results have been reported on the field emissions from multi-walled nanotubes (MWNTs) and single-walled nanotubes (SWNTs) grown from arc discharge [4, 5]. De Heer et al. have reported the field emission from nan-otubes aligned by the suspension-filtering method. This approach is too difficult to be fully adopted in integration process. Recently, there have been efforts to make applications to field emission devices using nanotubes. Saito et al. demonstrated a car-bon nanotube-based lamp, which was oper-ated at high voltage (10KV) [8]. Aproto-type diode structure was tested by the size of 100mm $\times$ 10mm in vacuum chamber [9]. the difficulties arise from the arrangement of vertically aligned nanotubes after the growth. Recently vertically aligned carbon nanotubes have been synthesized using plasma-enhanced chemical vapor deposition(CVD) [6, 7]. Yet, control of a large area synthesis is still not easily accessible with such approaches. Here we report integra-tion processes of fully sealed 4.5-inch CNT-field emission displays (FEDs). Low turn-on voltage with high brightness, and stabili-ty clearly demonstrate the potential applica-bility of carbon nanotubes to full color dis-plays in near future. For flat panel display in a large area, car-bon nanotubes-based field emitters were fabricated by using nanotubes-organic vehi-cles. The purified SWNTs, which were syn-thesized by dc arc discharge, were dispersed in iso propyl alcohol, and then mixed with on organic binder. The paste of well-dis-persed carbon nanotubes was squeezed onto the metal-patterned sodalime glass throuhg the metal mesh of 20${\mu}{\textrm}{m}$ in size and subse-quently heat-treated in order to remove the organic binder. The insulating spacers in thickness of 200${\mu}{\textrm}{m}$ are inserted between the lower and upper glasses. The Y\ulcornerO\ulcornerS:Eu, ZnS:Cu, Al, and ZnS:Ag, Cl, phosphors are electrically deposited on the upper glass for red, green, and blue colors, respectively. The typical sizes of each phosphor are 2~3 micron. The assembled structure was sealed in an atmosphere of highly purified Ar gas by means of a glass frit. The display plate was evacuated down to the pressure level of 1$\times$10\ulcorner Torr. Three non-evaporable getters of Ti-Zr-V-Fe were activated during the final heat-exhausting procedure. Finally, the active area of 4.5-inch panel with fully sealed carbon nanotubes was pro-duced. Emission currents were character-ized by the DC-mode and pulse-modulating mode at the voltage up to 800 volts. The brightness of field emission was measured by the Luminance calorimeter (BM-7, Topcon).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.432-439
• /
• 2020

To improve the relatively low economic efficiency of the Korean native pig, the Korean National Institute of Animal Science developed a novel pig breed, the Woori black pig (W), by crossing Korean native and Duroc (D) pigs. This study was conducted to evaluate the effects of W as a terminal sire on growth performance, body shape, and retail cut yield of crossbred pigs. By using a completely randomized design, 32 crossbred pigs were allotted to one of two treatment groups based on terminal sire. The two groups were LYD [(Landrace × Yorkshire) × D sire] and LYW [(Landrace × Yorkshire) × W sire]. The experimental assessments were conducted over 53 days. The terminal sire breed had no significant effect on body weight (BW) at d 53, or on BW gain, average daily gain, or days to reach a 90 kg body weight. Moreover, there were no significant differences in body length, body height, or chest depth between the two groups. However, there was a significant difference (p < 0.05) in backfat thickness between the LYD (17.29 mm) and LYW (18.96 mm) groups. Loin yield of crossbred pigs in the LYW group (13.11%) was significantly lower (p < 0.05) than that in the LYD group (13.85%). By contrast, the Boston butt yield was significantly higher (p < 0.05) in the LYW group (8.99%) than in the LYD group (8.21%). In conclusion, these results suggest crossbred pigs sired by a Woori black pig had growth performance, shape, and retail cut yield (except loin yield) Ed. Note: I assume the lower loin yield is a negative factor so I included this wording. similar to those sired by a Duroc pig. The results showed no overall negative effect Ed. Note: I assume the lower loin yield is a negative factor so I used this wording. on crossbred offspring, indicating the suitability of the Woori black pig as a terminal sire.

• Journal of Korean Ophthalmic Optics Society
• /
• v.12 no.4
• /
• pp.55-69
• /
• 2007

The purpose of this study was to perform a clinical test using ez NANOsence II RGP contact lenses for the effects of visual acuity and cornea on subjects with abnormal refraction status. One hundred twenty one adults (twenty nine males, ninety two females, range = 17 to 43, mean = 22.86) were recorded. The subject's history including, the symptoms from previous lens wear, were studied. The subjects were observed, both pre and post lens wear, for any symptoms and signs of change of the eye. The Visual acuity and the binocular status were tested at the far distance using the contact lens. The refraction test was performed on the naked eye using the objective method (Topcon KR-8100, Japan). The Stereopsis test was performed at the near distance after contact lens wear by the Titmus fly (Stereo Optical Co., U.S.A) and TNO (TECH, The netherlands). The contrast sensitivity diagnosis was performed at 1m distance after contact lens wear by the contrast sensitivity chart (pelli-Robertson, USA). The corneal topography was analyzed on the naked eye after lens wear by ORB scan (Bausch Lomb, U.S.A.). The ultra structure of surface on the contact lens was observed using SEM (JMS-5800, Japan). The chemical component's of the contact lens was analyzed by EDS program. The results of this study were as follows: 1. The longer of contact lens wear period, The subjects have acquired the most improved visual function. 2. Subjects had experienced few side effects wearing the contact lenses. 3. The lenses were easy to use by the subjects. 4. The longer of contact lens wear period, the power of cornea had more decrease. but the base curve of cornea had more increase and corneal astigmatism was decrease (p<0.01). Also, the thickness of corneal center was few decrease. 5. Longer periods of using the contact lens showed stereopsis and contrast sensitivity at more normal values. 6 The corneal topographical after lens wear showed most subjects with similar morphology for different wear periods. 7. The surface ultrastructure of the new and used contact lens was the similar fine shape. 8. The chemical component's of in the new and used contact appeared to have similar results. In conclusion, this study showed that the surface ultrastructure and chemical component's of the new and used contact lens are similar. In addition, the subjects had improved the quality of vision and few experienced any side effects during long periods of contact lens wear. Also they have decrease of corneal astigmatism during the long period of lens wear. Our test has showed that the chemical composition and fine structure of contact lens have related to the visual function on contact lens wearer. In this paper, we suggested that ez NANOsence II RGP contact lenses had a moderate effect for correcting vision of abnormal refraction eye.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.3
• /
• pp.325-337
• /
• 2003

This study was designed to determine the distribution of trans fatty acids (tFAs) isomers of Processed foods commonly consumed in Korea. The tFAs positional isomers were analyzed using GC/MS spectrometer with HP-23 cis/trans FAME, capillary column (50m $\times$ 0.20 mm, id., 0.2 ${\mu}{\textrm}{m}$ film thickness) for 41 food samples. TFAs isomers were identified by comparing retention time with standards and GC/MS spectrum. In margarines, the content of tFAs ranged from 4.0% to 25.16% and the most abundant positional isomer of tFAs was C18:1 $\Delta$9t. In oils and fats, lards contained higher levels of tFAs (5.70~16.54%) than shortenings (6.77~10.55%). Shortenings contained higher levels of C18:1 $\Delta$9t (3.1~5.1%) than lard (1.6~4.3%), but corn oils had no tFAs. In seasonings, mayonnaise had no C16:1 $\Delta$9t, whereas C18:3t was detected. The content of tFAs in confectioneries was wide (16.20~52.16%). Among them, instant popcorns contained the highest amount of tFAs. Milk and dairy products showed even distribution of tFAS such as C18:1t, C18:2t, and C18:3t. Predominant tFAS isomer of condensed milk and ice cream was C16:1 $\Delta$9t. Frozen french fries and fried chicken contained higher levels of C18:1$\Delta$9t (9.4%), whereas grilled pork (jowl) had no C18:1 $\Delta$9t. The amount of tFAs per serving size was the highest in popcorn, followed by frozen pizza, frozen french fries, fried chicken, and bakeries.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.5
• /
• pp.702-708
• /
• 2015

The aim of this study was to investigate the physicochemical characteristics of commercial Mukeunji product along with its sensory properties. Six different types of commercial Mukeunji products were purchased through an on-line market, and each product had a different fermentation period. General commercial Baechu Kimchi was compared with commercial Mukeunji products in order to standardize quality properties of Mukeunji. As a result, commercial Mukeunji showed a lower pH value (pH 3.96, mean value) than commercial Baechu Kimchi (pH 5.92), whereas commercial Mukeunji samples showed higher acidity and salinity. Color values (L, a, and b) of commercial Mukeunji decreased as the storage period increased. Hardness and thickness of commercial Mukeunji showed a lower range compared to Baechu Kimchi. The reducing sugar content decreased as the storage period of commercial Mukeunji increased. Acetic, lactic, and succinic acids were detected in commercial Mukeunji samples, whereas citric acid and malic acid were additionally detected in Baechu Kimchi. Commercial Mukeunji samples showed lower contents of acetic and succinic acid and higher content of lactic acid than Baechu Kimchi. Commercial Mukeunji samples showed a significant difference in all descriptive sensory attributes except for bitterness. Overall intensity, sourness, moldy odor, redness, sour smell, saltiness, and carbonated taste increased as the storage period increased, whereas cabbage flavor, crispiness, sweetness, firmness, and savory taste decreased as the storage period increased.

• The Korean Journal of Physiology
• /
• v.16 no.2
• /
• pp.195-207
• /
• 1982

To determine the influence of vegetarian diet on serum lipoprotein, cholesterol and protein levels, 45 young Buddhist nuns (age: $20{\sim}34$ years) and 29 female students(age: $20{\sim}22$ years) were examined. Daily caloric intakes were 1,945 Kcal for the Buddhist nuns and 1,815 Kcal for the students. The ratio of% calorie of carbohydrate: protein: fat from total calories in the Buddhist nuns was 84:11:5 and that in the students was 70:15:15. The Buddhist nuns had significantly higher carbohydrate intake but markedly lower lipid intakes than the students. Anthropometric measurement showed that the Buddhist nuns had significantly higher values of body weight, skin-fold thickness, body surface area and obesity index than the students. Both systolic and diastolic pressures of the Buddhist nuns and students were similar. Serum levels of total lipid, cholesterol and proteins in the Buddhist nuns were not different from those of the students. However, when comparing the levels of high density lipoprotein (HDL), very low density lipoprotein (VLDL) and low density lipoprotein (LDL) fractions, the Buddhist nuns had lower level of HDL but significantly higher LDL levels than the students. Furthermore, the Buddhist nuns had significantly lower levels of serum HDL-cholesterol but significantly higher LDL-cholesterol levels. There were significant correlations between LDL and LDL cholesterol (r=0.40), VLDL and VLDL-cholesterol(r=0.85), HDL and HDL-cholesterol(r=0.45), total serum lipid and total cholesterol (r=0.66) and total serum cholesterol and LDL(r=0.79). On the other hand, values of both serum total protein, and fractions of serum proteins were similar in the Buddhist nuns and students(ratio of albumin: ${\alpha}_{1}-:\;{\alpha}_{2}-:\;{\beta}-:\;{\gamma}-$globulins=55:3:10:13:19). Hematocrit and hemogloblin levels were similar in the Buddhist nuns and students. Above results suggest that vegetarian diets of the Buddhist nuns produced alterations in the metabolism of the lipoproteins and cholesterol.