• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.965-968
• /
• 2004

Effective transverse Piezoelectric Coefficients $(e_{31,f})$ of thick PZT $(Pb(Zr_{0.52}Ti{0.48}Ti_{0.48})O_3)$ films on $SiN_x/Si$ substrates were measured with PZT thicknesses and top electrode dimensions. $e_{31,f}$ is one of important Parameters characterizing Piezoelectricity of PZT films. Thick PZT films have been used as various sensors and actuators because of their high driving force and high breakdown voltage. Thick PZT films were fabricated on Pt/Ta/$SiN_x$/Si substrates using sol-gel method. Thicknesses of PZT films were $1{\mu}m$ and $1.8{\mu}m$. $|e_{31,f}|$ values of $1.8{\mu}m$-thick-PZT films were higher than those of $1{\mu}$-thick-PZT films. Maximum $|e_{31,f}|$ of $1.8{\mu}$-thick-PZT films was about $50^{\circ}C/m^2$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.756-759
• /
• 2007

We have fabricated pentacene OTFT on ultra-thin flexible polyimide film with a rigid glass support. Polyimide film of the thickness of $10{\mu}m$ has formed on glass by spin coating from the solution. After the entire OTFT process, the OTFT exhibited a fieldeffect mobility of $0.4\;cm^2/Vs$, an $I_{on}/I_{off}$ ratio of $10^7$ and a subthreshold swing of 0.7 V/dec. The OTFT on polyimide film has been detached from the glass support and laminated on a plastic support of $130\;{\mu}m-thick$ PET film. After the detach process, in spite of the degrading of its field-effect mobility, the OTFT showed high $I_{on}/I_{off}$ as high $as{\sim}10^6$.

• 한국포장학회지
• /
• 제8권1호
• /
• pp.15-22
• /
• 2002

PET $16{\mu}m/dry$ lamination/Al-foil $7{\mu}m/dry$ lamination/CPP $80{\mu}m$의 사양으로 2개 업체에서 제조된 포장용 복합필름에서 제품 충전공정 중에서 발생한 열접착 트러블의 원인을 규명하고자 복합필름을 분리하여 각각의 두께와 재질이 제시된 사양과 일치하는지를 관능검사와 IR, DSC로 측정한 결과 1개 업체의 것이 차단층의 두께가 다르고 열접착층 필름의 재질은 비슷한 것임을 알았고, 시험기로 찾은 최적 열접착조건은 $195^{\circ}C$와 $210^{\circ}C$로 $15^{\circ}C$의 차이를 보였으며 이를 종형 4면 액체충전포장기로 직접 충전 포장하였을 때의 봉지의 열접착 강도를 비교한 결과 최적 열접착 조건 $195^{\circ}C$의 것은 평균 $4.76kg/cm^2/15mm,\;210^{\circ}C$의 것은 평균 $3.84kg/cm^2/15mm$이었다.

• 조명전기설비학회논문지
• /
• 제23권1호
• /
• pp.78-84
• /
• 2009

본 연구에서는 ZnO:Al 박막의 필름형 염료감응 태양전지의 투명전도막으로의 웅용 가능성을 연구하기 위하여 PET 기판 위에 r. f. 마그네트론 스퍼터링법으로 ZnO:Al 박막을 증착하였으며, ZnO:Al 박막의 전기적 그리고 광학적 특성의 향상을 위하여 기판 바이어스 전압을 인가하였다. 그 결과, 정(+)의 기판 바이어스 전압은 플라즈마 중의 전자를 기판의 스퍼터 원자에 충돌하게 함으로써 박막에 부가적인 에너지를 공급하게 되어 박막의 결정성장 및 전기적 특성을 향상시키고 있음을 알 수 있었다. 그러나 +30[V] 이상의 과도한 기판 바이어스 전압을 인가한 경우, 박막의 전기적 특성은 나빠졌으며, 특히 부(-)의 바이어스 전압을 인가한 경우 결정 성장이 나타나지 알아, 전기적 특성의 향상을 위한 기판 바이어스 전압의 효과가 매우 제한적으로 작용되고 있음을 알 수 있었다. 본 연구에서는 +30(V)의 기판 바이어스 조건하에서 $1.8{\times}10^{-3}[{\Omega}-cm]$의 체적 저항율 및 87.77(%)의 광 투과율을 얻을 수 있었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.356-358
• /
• 2004

In this paper we fabricated and succeeded to demonstrate a test panel for AMOLED on 2" glass and PET substrate. The test panel consisted of an array of 64 x 64 pixels in which OLEDs was driven by pentacene TFT. OTFTs were made of the inverted staggered structure and employed polyvinylphenol as the gate insulator and pentacene thin film as the active layer, producing the filed effect mobility of 0.3$cm^2$/V.sec and on/off current ratio of $10^5$. OLEDs were composed of TPD for HTL and Alq3 for EML with 35nm thick each, generating green monochrome light.

• 한국전기전자재료학회논문지
• /
• 제15권12호
• /
• pp.1054-1059
• /
• 2002

A great deal of research has been done in the field of characterization for piezoelectric thin films after the first report on the measurement for the piezoelectric coefficient of thin films in 1990. The main idea of this research is to provide a distinctive solution for the measurement and standardization of both the longitudinal and the transverse piezoelectric d-coefficients, d33 and d31, of ferroelectric thin films. In general, to get these two coefficients of thin films, two different measuring systems are required. Here, we propose the improved method for the evaluation of these two coefficients with single equipment and with the relatively convenient procedure. The two-step loading process of applying the both positive and the negative pressure has been introduced to acquire the piezoelectric coefficients. These results have been calibrated for both the longitudinal and 4he transverse piezoelectric d-coefficients, d33 and 431, of thin films by comparison with the virtual standard created from FEM. In this experiments, we have obtained d33 of 331pC/N and 031 of -92.2pC/N for the PZT thin films.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(2)
• /
• pp.379-382
• /
• 2004

In this paper we fabricated a test panel for AMOLED on glass and PET substrate. The test panel consisted of the various size of OTFTs and OLEDs and the current driving capability of OTFTs for OLEDs has been investigated. OTFTs were made of the inverted staggered structure and employed polyvinylphenol (PVP) as the gate insulator and pentacene thin film as the active layer. The OTFTs produced the filed effect mobility of $0.3 cm^2/V.sec$ and on/off current ratio of $10^5$. OLEDs consisted of TPD for HTL and Alq3 for EML with 35nm thick, generating green monochrome light. We found that OTFT with channel length of 70${\mu}m$ and channel width of over 3.5mm provided the sufficient current to OLED to generate the luminescence of $0.3Cd/m^2$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.1034-1037
• /
• 2004

In this paper we fabricated a test panel for AMOLED on glass and PET substrate. The test panel consisted of the various size of OTFTs and OLEDs and the current driving capability of OTFTs for OLEDs has been investigated. OTFTs were made of the inverted staggered structure and employed polyvinylphenol (PVP) as the gate insulator and pentacene thin film as the active layer. The OTFTs produced the filed effect mobility of 0.3$cm^2$/V.sec and on/off current ratio of $10^5$. OLEDs consisted of TPD for HTL and Alq3 for EML with 35nm thick, generating green monochrome light. We found that OTFT with channel length of 70${\mu}m$and channel width of over 3.5mm provided the sufficient current to OLED to generate the luminescence of 0.3Cd/$m^2$.

• 한국염색가공학회지
• /
• 제5권4호
• /
• pp.29-41
• /
• 1993

In order to surface Hydrophobilization of Poly(ethylene terephthalate) (PET) fiber samples were treated in the atmosphere of CF$_{4}$ or $C_{2}$F$_{6}$glow discharge. The sample used in this study was PET film which is 75$\mu$m thick made by Teijin, O-Type(Japan). The cleaned samples were placed in plasma reactor made of pyrex glass cylinder, and plasma processing was carried out by glow discharge of CF$_{4}$ or $C_{2}$F$_{6}$ gas, being continuously fed by gas flow and continuously pumped out by a vacuum system. Electric power source for generate plasma state was sustained alternating current(60Hz) and voltage was sustained 600 volt. The duration of plasma treatment varied from 15 to 120 seconds except special case, the monomer gase pressure varied from 0.02 to 0.3 Torr and power range was 10 to 90 watts. The hydrophobic features of changed PET surface were evaluated by contact angle measurement and surface chemical characteristics were analyzed by ESCA. Results can be summerized as follows. 1. The most favorable setting position of substrate was the center area between the two electrodes. 2. $C_{2}$F$_{6}$ discharge current was lower than that of CF$_{4}$ when same voltage was sustained. Treated efficiency between CF$_{4}$ and $C_{2}$F$_{6}$ did not revealed significant differences under same electric power(wattage). 3. When monomer pressure is very low below 0.02 torr, as though substrate is exposed to CF$_{4}$ or $C_{2}$F$_{6}$ plasma, it tend to be hydrophilic through a little of fluorine bond and a great deal of oxidizing reaction. 4. There brought good hydrophobilization when monomer pressure was more 0.1 torr and duration of glow discharge treatment was over 45 seconds. When monomer pressure was too high, discharge current became low. Although prolong the duration, there was no more high hydrophobilization. 5. According to ESCA analysis, there were a little CF bond and a prevailing CF$_{2}$ bond in CF$_{4}$-treated substrate. There were CF$_{3}$, a little CF and a prevailing CF$_{2}$ bond in $C_{2}$F$_{6}$-treated substrate.d substrate.

• 멤브레인
• /
• 제24권6호
• /
• pp.453-462
• /
• 2014

폴리에스터(polyester) 부직포 상에 폴리술폰(polysulfone) 고분자 지지체를 만든 후, 그 표면에 폴리아미드 복합 박막을 형성시킴으로써 정삼투(FO) 공정에 적합한 분리막을 제조하였다. PSF 지지체는 19 중량%의 함량으로 디메틸 포름아미드(DMF)에 균일하게 용해된 폴리술폰 용액을 상 전이 공정을 통하여 제조되었으며, 기계적 보강재로 $100{\mu}m$의 두께를 가지는 폴리에스터 부직포를 사용하였다. 19 중량%의 PSF/DMF 용액으로 제조된 PSF 지지층은 sponge-like구조를 가지는 비대칭 내부 구조를 나타내었다. 정삼투(FO) 공정에서 내부의 농도 분극을 줄이기 위하여, $20{\mu}m$의 얇은 부직포 보강층을 가지는 지지체 상에 9~19 중량%의 PSF/DMF 용액으로 PSF 지지체를 제조하였다. 이들 얇은 부직포 보강층에서 제조된 지지층들은 공극률이 향상된 sponge-like구조를 가지는 것을 확인할 수 있었다. 각각의 지지층들 표면에 방향족 폴리아미드 가교 반응을 통하여 복합 박막을 얻을 수 있었다. FO 운전 결과, 12 중량%의 DMF/PSF 용액으로 제조한 지지체를 가지는 복합 박막이 가장 우수한 투과 성능을 보여 주었다. 이 경우 4.5 LMH의 유량과 3.47 GMH의 염의 역확산 속도를 가지는 역삼투 분리막에 사용되는 두꺼운 부직포에 비해 약 2.5배 유량이 많은 24.3 LMH의 유량과 1.5 GMH의 염의 역확산 속도를 보여주고 있다. 부직포의 두께 저하와 이에 적합한 PSF 캐스팅 용액의 최적화를 통하여 부직포와 PSF층의 경계면 공극률을 향상시킬 수 있었다.