• Textile Coloration and Finishing
• /
• v.8 no.2
• /
• pp.1-7
• /
• 1996

Thermotropic liquid-crystalline polyurethanes were synthesized by the polyaddition reaction of such para-substiuted diisocyanate monomer as 1,4-phenylene diisocyanate(1,4-PDI) and 2,5-tolylene diisocyanate(2,5-TDI), with 4,4'-bis($\omega$-hydroxyalkoxy)biphenyls(BPm: $HOC_{m}OC_{6}H_{4}C_{6}H_{4}OC_{m}H_{2m}OH$; m is the carbon number of the hydroxyalkoxy group). These polyurethanes have mesogenic biphenyl units in the main chain. Properties of polymers were studied by differential scanning calorimetry, wide-angle X-ray scattering, thermogravimetic analysis, polarizing microscopy, and infraed spectroscopy. DSC thermograms for these polymers exhibited two endothermic peaks corresponding to phase transitions of melting and isotropization. Mesomorphic behavior of the polyurethanes were also observed under the polarizing microscope. For example, polyurethane 2,5-YDI/BP5 with [$\theta$]=0.44 prepared from 2,5-TDI and BP5 exhibited a liquid crystalline phase from 194 to 205$^{\circ}C$. Infrared spectrum study indicated that the hydrogen bonding between urethane linkages affected the mesomorphism. The thermostabilities of polyurethanes 2,5-TDI/BP5 and 1,4-PDI/BP5 were measured at a heating rate of 1$0^{\circ}C$/min in air. The temperatures of 5% weight loss for 2,5-TDI/BP5 and 1,4-PDI/BP5 were 297 and 334$^{\circ}C$, respectively.

• Fibers and Polymers
• /
• v.7 no.4
• /
• pp.358-366
• /
• 2006

Thermotropic liquid crystal polymer (TLCP)-reinforced poly(butylene terephthalate) (PBT) composites were prepared by melt processing. The improvement in the mechanical properties and the processability of the PBT/TLCP composites was attributed to the reinforcing effect by TLCP phase and its well distribution in the PBT matrix. X-ray diffraction results demonstrated that a slow cooling process leads to the thicker lamellar structures and the formation of more regular crystallites in the composites. The incorporation of TLCP improves not only the tensile strength and flexural modulus but also the heat distortion temperature (HDT) of the PBT/TLCP composites. The HDT values of the composites were dependent on TLCP content. The improvement in the HDT values of the PBT/TLCP composites may be explained in terms with the increased flexural modulus, the development of more regular crystalline structures, and the enhancement of the ability of the composites to sustain the storage modulus by TLCP phase. In addition, the simple additivity rule makes it possible to predict the HDT values of the PBT/TLCP composites.

• Polymer(Korea)
• /
• v.31 no.1
• /
• pp.37-46
• /
• 2007

Fully or nearly fully 6- [4- (4'- (nitrophenylazo)phenoxycarbonyl)]pentanoated polysaccharide derivatives were synthesized by reacting cellulose, amylose, chitosan, chitin, alginic acid, pullulan or amylopectin with 6- [4- (4'- (nitrophenylazo)phenoxy) ] pentanoyl chloride (NA6C) and their thermotropic liquid crystalline behaviors were investigated. Like in the case of NA6C, all the polysaccharide derivatives formed monotropic nematic phases, suggesting that the mesophase structure of the polysaccharide derivatives is dertermined by the mesogenic side groups and not by the polysaccharide backbone. This is the first report of polysaccharide derivatives, except cellulose derivative, that form thermotropic nematic phases. The thermal stability and degree of order of the nematic phases observed for poly saccharide derivatives were significantly different from those reported for the polymers in which the azobenzene groups are attached to flexible or rigid backbones through flexible spacers. The results were discussed in terms of the difference in the arrangement of the main and side chains and the flexibility of the main chain.

• Polymer(Korea)
• /
• v.33 no.4
• /
• pp.297-306
• /
• 2009

A homologous series of side chain liquid crystalline polymers, poly [1-{4-(4'-cyanophenylazo)phenoxyalkyloxy}ethylene]s(CAPETn, where n, the number of methylene units in the spacer, is $2{\sim}10$) were synthesized from poly(vinyl alcohol) and 1-{4-(4'-cyanophenylazo)phenoxy}alkylbromides(CAPBn, n=$2{\sim}10$), and their thermotropic liquid crystalline phase behaviors were investigated. The CAPBn with n of $2{\sim}5$ did not show any liquid crystalline behavior, while those with n of 6 and $7{\sim}10$ showed enantiotropic and monotropic nematic phases, respectively. In contrast, among the CAPETn polymers, only CAPET5 exhibited an enantiotropic nematic phase, while other polymers showed monotropic nematic phases. The isotropic-nematic transition temperatures of CAPETns and their entropy variation at the phase transition that were higher values than those of CAPBns, demonstrated a typical odd-even effect as a function of n. These phase transition behaviors were disscussed in terms of the 'virtual trimer model' by Imrie. The mesophase properties of CAPETns were largely different from those reported for the polymers in which the (cyanophenylazo) phenoxy groups are attached to polyacrylate, polymethacrylate, and polystyrene backbones through polymethylene spacers. The results indicate that the mode of chemical linkage of the side group with the main chain plays an important role in the formation, stabilization, and type of mesophase.

• Applied Chemistry for Engineering
• /
• v.25 no.1
• /
• pp.47-52
• /
• 2014

A series of liquid crystalline polyesters containing X-shaped mesogenic groups in main chain were synthesized through the solution polymerization of 2,5-di(4-substituted benzoate)hydroquinones and 4,4'-dicarboxy-1,8-diphenoxyoctane. The structures and properties of synthesized polymers were investigated by $^1H$-NMR, FT-IR, differential scanning calorimetry (DSC), thermogravimetry analysis (TGA), polarized optical microscopy (POM) and wide angel X-ray diffraction (WXRD). Inherent viscosities (${\eta}_{inh}$) of polymers were measured between 0.35 and 0.66 dL/g in 1,1,2,2-tetrachloroethane, and they were easily soluble in most of organic solvents used for this experiment. All polymers revealed relatively low melting transition temperature ($T_m$) and crystallinity, and also showed thermotropic nematic liquid crystallinity when they were heated to their melting temperatures. These properties of polymers were presumably due to the presence of the bulky substituting groups on the hydroquinone unit in mesogenic group.

• Polymer(Korea)
• /
• v.29 no.6
• /
• pp.523-535
• /
• 2005

Linear aromatic polyesters are representative examples of thermotropic liquid crystalline polymers (TLCPs), which have been the subject of many researches. This article reviews the structure-LC properties relationship in wholly aromatic CLCPs mostly based on the results obtained for the past quarter of a century. Especially, this review deals with the structural details of aromatic polyester TLCPs that influence the liquid crystalline and thermal properties. In the last part of this article the liquid crystalline properties of combined type and hyperbranched polyester also are discussed. Introduction to various synthetic methods are included in the last section.

• Textile Coloration and Finishing
• /
• v.8 no.1
• /
• pp.56-63
• /
• 1996

A number of thermotropic liquid crystalline polyurethanes with mesogenic unit were synthesized by polyaddition of a para-type diisocyanate such as 1, 4-phenylene diisocyanate(1,4-PDI) with 4, 4'-bis($\omega$-hydorxyalkoxy) biphenyls($BP{m}$) in DMF. The thermal and liquid crystab line properties were examined by differential scanning calorimetry(DSC), polarized optical microscopy, and wide-angle X-ray scattering(WAXS). Intrinsic viscosities of the polymers exbibited two endothermic peaks correspondinding to phase transitions of melting and isotropization. For example, polyurethane(1,4-PDI/($BP{11}$) ) was found to display a liquid crystalline phase between 177 to 205$^{\circ}C$. In order to know how the hydrogen bonding interaction affects the formation of mesophases in polyurethane 1, 4-PDI/($BP{8}$) / thermal processing FT-IR measurements were carried out. It was found that the stretches regarded as shift to higher frequency region with increasing temperature which showed grdually their liquid crystalline phase

• Bulletin of the Korean Chemical Society
• /
• v.28 no.2
• /
• pp.193-199
• /
• 2007

Raman and fluorescence spectroscopies were employed to study the coil effects on the intermolecular structure of a rod-coil liquid crystalline (LC) oligomer, the esterification products of ethyl 4-[4'-oxy-4-biphenylcarbonyloxy]- 4'-biphenylcarboxylate with poly(propylene)oxides (PPO) (DP=12) and poly(ethylene oxide)s (PEO) (DP=12). Three different vibrational modes (carbonyl, aromatic C-H, and aromatic C=C) obtained from the Raman experiment at variable temperature indicate that PPO and PEO coils induce the hydrogen bonding in a different manner. Further information about the micro-environment around the mesogenic unit obtained by fluorescence excitation spectra of P12-4 (LC with PPO coil) and 12-4 (LC with PEO coil) suggests that the mesogenic unit of P12-4 is quite different from that of 12-4 in intermolecular structure. This study supports the results obtained only from Raman spectroscopy, providing more accurate information about the intermolecular structural changes of liquid crystalline polymers at a molecular level during the phase transitions.

• Applied Chemistry for Engineering
• /
• v.3 no.2
• /
• pp.280-287
• /
• 1992

Aromatic liquid crystalline polyesters were synthesized from terephthalic acid(TPA), biphenyl dicarboxylic acid(BPA) and hydroquinone(HQ) by solution polymerization. Effects of TPA/BPA ratio(by mole %) on the thermal properties, thermal stability and textures of mesophases were investigated with DSC, TGA, cross-polarized microscopy and X-ray diffractometer. The synthesized polymers in this study were thermotropic and showed nematic textures. Melting temperature($T_m$) and isotropization temperature($T_i$) of polymer increased and thermal stabilities of polymer were improved with the content of BPA. Most of the polymers in this study had crystallinity more than 30%.

• Polymer(Korea)
• /
• v.35 no.2
• /
• pp.176-182
• /
• 2011

Liquid crystalline aromatic polyesters (LCPs) are representative examples of thermotropic liquid crystalline polymers, whose structure-property relationships have been the subject of many researches. In this study, we synthesized organo-soluble liquid crystalline aromatic polyesters, and their composites with acetylene-terminated thermoset resins were prepared and characterized. Soluble LCPs were synthesized by employing 6-hydroxy-2-naphthoic acid, terephthalic acid, isophthalic acid, and 4-aminophenol as monomers via condensation polymerization based on transesterfication and transamidation. Acetylene-terminated thermoset resins were synthesized by the reaction of 4-ethynylaniline with terephthaloyl dichloride, isophthaloyl dichloride or 4,4'-biphenyldicarbonyl dichloride. We prepared the soluble LCP/thermoset composites by solution blending followed by thermal treatment. The thermal stability, thermal expansion coefficient, and dielectric properties of the composite were studied.