• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.333-334
• /
• 1989

Electrically active part of the piezoelectric sound element is a ceramic thin circular disk cemented to a metal base plate (using a type of thermosetting epoxy). The active part is a thin lead zirconate titanate disk (PZT). The piezoelectric sound element is so dimensioned that its basic resonance frequency is approximately if the center of the audible frequency band: This frequency is mainly determined by the geometry and the sort of the metal base plate materials. In this study, four kinds of PZT ceramic and two classes of thin metal base plate were prepared. It is observed that dielectric and pizoelectric properties relate to acoustical properties (particularly sound pressure level).

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.88-91
• /
• 2004

In this study, a number of natural fiber henequen reinforced polymer matrix composites were successfully fabricated by means of a compression molding technique using chopped henequen fibers surface-treated with different electron beam irradiation (EBI) dosages, thermoplastic poly(butylene succinate), thermosetting unsaturated polyester and phenolic resins. Their interfacial and thermal characteristics were studied in terms of interfacial shear strength, fracture surface, dynamic mechanical properties, dimensional stability, and thermal stability using single fiber microbonding test, SEM, DMA, TMA, and TGA. The results show that their interfacial and thermal properties significantly depend on the intensity of EBl treatment on the natural fiber surface.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.797-803
• /
• 2001

The on-line cure monitoring of fiber reinforced thermosetting resin matrix composite material was performed for the better quality and productivity during manufacturing. Since the dissipation factor measured by dielectrometry method is dependent on the degree of cure and temperature of resin, in this study, a new method to obtain the degree of cure during on-line cure monitoring for glass/polyester composites was developed by employing a combination function of the temperature and the dissipation factor. Two sensor signals from a K-type thermocouple and an interdigitated dielectric sensor were processed during curing process under various cure cycles. The DSC (Differential Scanning Calorimetry) data was also used for the reference of degree of cure.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1386-1391
• /
• 2007

The ballast gravels are often contaminated by various pollutants, like diesel fuel, lubricants, and heavy metals. Especially, the gravels near the switching are apt to be polluted by the lubricant. Because this lubricant can pollute the soil of track, the contaminated ballast gravels should be cleaned immediately. In this study, a physical desorption method was used to remove the oil contaminants from the surface of the ballast gravels. Thermosetting resin was used as a media for physical remediation of ballast gravels. The total petroleum hydrocarbon of the gravels was monitored over time. In addition, scanning electron microscopic images were obtained to observe the removal of the oily pollutants from the surface of the gravels.

• 전기학회논문지
• /
• 제61권6호
• /
• pp.827-832
• /
• 2012

The crosslinked polyethylene (XLPE) is the most widely used insulating material for power cable. Due to its thermosetting characteristics, the XLPE can not be recycled, while the needs for the environmental friendly and recyclable insulator is rapidly increasing. In this paper, some important and basic electrical properties of non-crosslinked polyethylene such as conduction current characteristics, water the tree characteristics, AC breakdown test were experimentally investigated. It was shown that some of the tested samples had better performances from the application point of view for replacing current XLPE.

• 한국안전학회지
• /
• 제12권1호
• /
• pp.71-76
• /
• 1997

In this paper, it was described results of study on curing safety of molding meterial, about the variation of phenol resin contents, wood flour contents and moisture of wood flour, under the same condition. The experimental results are summarized as follows ; 1) When the curing temperature was high, the curing time was short in the case of 4～8wt% moisture of wood flour, but in the case of more than l2wt% moisture of wood flour, the curing time was long. 2) The curing time for curing temperature was more short when 6wt% moisture of wood flour than 4wt% moisture of wood flour. 3) The more wood flour content and moisture of wood flour content, the longer curing time and the more mineral filler content, the shorter curing time. 4) When the phenol resin content of main matrix increase, the curing time was short.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1467-1469
• /
• 2002

This paper aims to investigate the characteristics of braided thermoplastic and thermosetting composite and pressure relief for polymer arrester. In general, braided composite has potential for improved impact and delamination resistance. Manufacturing processes of the braided composite could also be automated and could potentially lead to lower costs. Therefore, in consideration of characteristics of pressure relief for polymer arrester, the fabric pattern of braided composite was studied. And polymer arrester module was manufactured with braid.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 1999년도 춘계학술발표대회 논문집
• /
• pp.103-108
• /
• 1999

A synthesized model of pultrusion process considering thermally induced deformatiion was established. The model was composed of liquid resin flow model thermo-chemical analysis and linear elastic analysis. in order to verify the above-mentioned models several experiments were performed. A laboratory scale pultrusion line was established and glass/polyester composites were fabricated. the experimental results were compared with the calculated ones. The model successfully could estimate degree of cure pulling force and amount of process-induced deformation.

• Journal of the Korean Wood Science and Technology
• /
• 제28권4호
• /
• pp.56-60
• /
• 2000

A new porous carbon material "woodceramics" was developed by carbonizing wood or woody materials impregnated with thermosetting resin. Steamed board and non-steamed board were made from thinned small log of Aomori Hiba (Thujopsis dolabrata S. et. Z. var. hondae M.). They were impregnated with phenol resin and sintered in a vacuum furnace at $650^{\circ}C$. In this paper, the manufacturing method of woodceramics and changes of dimension, weight and compressive strength were investigated. The changes of dimension, weight and compressive strength depend on the types of board and density.

• 한국인쇄학회지
• /
• 제29권3호
• /
• pp.55-63
• /
• 2011

The convex printing plate in particular securities is classified three physical properties. The main ingredient(component)of photosensitive plastic is composed of thermosetting polyamide. After being hardened specimen at $80^{\circ}C$ is shown to resist highly, the Glass Transition Temperatures of photosensitive plastic are $85^{\circ}C$. When hardened plate has reached at $80^{\circ}C$, abrasion loss is minimized. the cause is considered it is more effective in hardening when the temperature of photosensitive plastic is $80^{\circ}C$-the vitrification temperature of those. The hardness and the durability of the convex printing plate in particular securities are affected to the hardening treatment temperature. And the resolution of original drawing has being better when the durability is superior.