• 대한기계학회논문집A
• /
• 제40권5호
• /
• pp.505-511
• /
• 2016

이 연구에서는 3차원 진공 열성형 해석을 통하여 3개의 캐비티를 가지는 냉장고 내상의 진공 열성형 특성을 분석/고찰 하고자 한다. 3개의 캐비티를 가지는 냉장고 내상 금형의 3차원 모델을 이용하여 냉장고 내상 제품의 기초 성형성을 분석하였다. 고온 인장시험을 수행하여 진공 열성형 재료에 대한 물성데이터 도출과 재료 특성 분석을 하였다. 3개의 캐비티를 가지는 냉장고 내상의 열성형 공정의 세부 공정들을 설계하고 세부 공정들에 적합한 유한요소해석 모델을 개발하였다. 각 세부 공정들에 대한 3차원 유한요소해석을 수행하여 제품의 변형 형상 및 두께 분포를 분석하였다. 최종적으로 3개의 캐비티를 가지는 냉장고 내상의 성형성과 진공 열성형 특성을 고찰하였다.

• 한국정밀공학회지
• /
• 제29권9호
• /
• pp.946-957
• /
• 2012

The objective of this paper is to investigate into the development of a thin flat panel photo-bioreactor case with characteristics shapes. The thin flat panel photo-bioreactor case was designed to be manufactured from a plastic thermoforming process. A proper design with a relatively high rigidity was obtained through the structural analyses for different designs of the photo-bioreactor case. The thermoforming analyses were performed. From the results of the thermoforming analyses, a proper forming condition and the formability of the designed plastic photo-bioreactor case were estimated. The thermoforming moulds for the flat panel photobioreactor cases were manufactured. The thermoforming experiments were performed to examine the manufacturability of the designed flat panel photo-bioreactor cases. From the results of the thermoforming experiments, it was shown that thin flat panel photo-bioreactor cases with characteristic shapes can be manufactured from the designed thermoforming mould and process.

• 대한기계학회논문집A
• /
• 제30권7호
• /
• pp.849-856
• /
• 2006

In this paper, fabric composite draping on hemisphere moulds were studied to find out the deformation behaviour of micro-tow structures of fabrics during draping and thermoforming. Aluminium and PVC foams were used to fabricate the hemisphere moulds for draping tests. In order to observe the local tow deformation pattern during the draping several specimens for microscopic observation were sectioned from the draped hemisphere structures. The effect of forming condition and mould properties on tow deformation was investigated by the microscopic observation of the tow parameters such as crimp angle. Normalization scheme was performed to compare tow parameter variations with different forming conditions. Stress-strain .elations of two different PVC foams (HT70 and HT110) were tested to investigate the effect of foam property on the micro-tow deformation during forming.