• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1511-1519
• /
• 2014

The objective of this paper is to propose a modelling of a small compressed air energy storage system, which drives an induction generator based on a field-oriented control (FOC) principle for a renewable power generation. The proposed system is a hybrid technology of energy storage and electrification, which is developed to use as a small scale of renewable energy power plant. The energy will be transferred from the renewable energy resource to the compressed air energy by reciprocating air compressor to be stored in a pressurized vessel. The energy storage system uses a small compressed air energy storage system, developed as a small unit and installed above ground to avoid site limitation as same as the conventional CAES does. Therefore, it is suitable to be placed at any location. The system is operated in low pressure not more than 15 bar, so, it easy to available component in country and inexpensive. The power generation uses a variable speed induction generator (IG). The relationship of pressure and air flow of the compressed air, which varies continuously during the discharge of compressed air to drive the generator, is considered as a control command. As a result, the generator generates power in wide speed range. Unlike the conventional CAES that used gas turbine, this system does not have any combustion units. Thus, the system does not burn fuel and exhaust pollution. This paper expresses the modelling, thermodynamic analysis simulation and experiment to obtain the characteristic and performance of a new concept of a small compressed air energy storage power plant, which can be helpful in system designing of renewable energy electrification. The system was tested under a range of expansion pressure ratios in order to determine its characteristics and performance. The efficiency of expansion air of 49.34% is calculated, while the efficiency of generator of 60.85% is examined. The overall efficiency of system of approximately 30% is also investigated.

• 자원환경지질
• /
• 제35권2호
• /
• pp.103-112
• /
• 2002

토양 산성화에 따른 알루미늄 독성현상과 관련하여 자연환경에서의 존재 가능성이 제기되어온 $Al_{13}$-tridecamer 의 열역학적 생성조건에 대한 고찰을 Al-함유 광물상을 다량 함유하고 있는 제주도 나디졸 토양 Bo층 시료의 실내 평형실험 결과를 기초로 실시하였다. 대강토양은 평형상태일 경우 $Al(OH)_{3}$, 이모골라이트 혹은 프로토-이모골라이트가 반응액의 알루미늄 총활동도를 조절하는 주 고상인 것으로 나타났다. 이 경우 반응액의 알루미늄 총활동도는 pH 5~7환경에서 $10^{-6}$~$10^{-8}$~M 로 매우 낮게 나타난다. 기존의 열역학 자료들을 이용한 $Al_{13}$-tridecamer생성조건 고찰 결과, 알루미늄의 총활동도가 $Al_{13}$-tridecamer의 생성 여부를 결정하는 가창 주요 요인으로, 예를 들어, 그 활동도가 $10^{-5}$/M이 되기 위하여는 pH=5~7 구간에서는 약 $2{\times}10^{-5}$M, pH=4에서는 약 $3{\times}10^{-3}$M 이상치 알루미늄이 자연수에 용해되어 있야 한다. 따라서 $Al(OH)^{3}$, 이모골라이트 혹은 프로토-이모골라이트 등에 의해 알루미늄 총활동도가 제안되는 토양계에서는 평형조건에서 $Al^{13}$/-tridecamer 생성을 위한 알루미늄 총활동도 조건을 충족시키지 못한다 이러한 결과는 Al-함유고상들에 의해 알루미늄 총활동도가 조절되는 평형조건에 근접한 자연계 토양에서는 $Al_{13}$-tridecamer치 생성확인 가능성이 배우 낮음을 제시하며, 단지 pH 3 내외의 산성화가 심화된 극히 일부 토양, 또는 산성환경에서 형성된 높은 일루미늄 총활동토플 갖는 용액이 부분적으로 중화되는 비평형 환경 등, 극히 제한적인 환경에서만이 다량의 $Al_{13}$-tridecamer생성이 가능할 것이다. 이러한 열역학적 고찰 결과는 깁사이트 및 이모 라이트가 알루미늄 거동의 주요 영향인자인 안디졸 및 스포도졸 토양에서의$Al_{13}$-tridecamer의 인지 가능성은 매우 희박함을 지시해 주며, 따라서 이 같은 토양에서의 $Al_{13}$-tridecamer에 의한 독성현상은 그 가능성은 극히 낮을 것으로 생각된다.

• 대한화학회지
• /
• 제58권2호
• /
• pp.169-178
• /
• 2014

A new series of metal complexes of V(IV), Pd(II), Pt(IV), Ce(IV) and U(VI) with 3-[(3-chlorophenyl)-hydrazono]-pentane-2,4-dione (Cphpd) were synthesized and characterized by elemental analysis, molar conductivity, magnetic moment measurements, UV-vis, FT-IR and $^1H$ NMR as well as TG-DTG techniques. The data indicated that the Cphpd acts as a bidentate ligand through the hydrazono nitrogen and one keto oxygen. The kinetic parameters have been evaluated by using Coats Redfern (CR) and Horowitz-Metzeger (HM) methods. The thermodynamic data reflected the thermal stability for all complexes. The calculated bond length and the bond stretching force constant, F(U=O), values for $UO_2$ bond are $0.775{\AA}$ and $286.95Nm^{-1}$. The bond lengths, bond angles, dipole moment and the lowest energy model structure of the complexes have been determined with DFT calculations. The antimicrobial activity of the synthesized ligand and its complexes were screened.

• 한국분말재료학회지
• /
• 제18권6호
• /
• pp.538-545
• /
• 2011

This study shows that catalytic activity of bimetallic RhPt nanoparticle arrays under CO oxidation can be tuned by varying the size and composition of nanoparticles. The tuning of size of RhPt nanoparticles was achieved by changing concentration of rhodium and platinum precursors in one-step polyol synthesis. Two-dimensional RhPt bimetallic nanoparticle arrays in different size and composition were prepared through Langmuir-Blodgett thin film technique. CO oxidation was carried out on these two-dimensional nanoparticle arrays, revealing higher activity on the smaller nanoparticles compared to the bigger nanoparticles. X-ray photoelectron spectroscopy (XPS) results indicate the preferential surface segregation of Rh compared to Pt on the smaller nanoparticles, which is consistent with the thermodynamic analysis. Because the catalytic activity is associated with differences in the rates of $O_2$ dissociative adsorption between Pt and Rh, this paper suppose that the surface segregation of Rh on the smaller bimetallic nanoparticles is responsible for the higher catalytic activity in CO oxidation. This result suggests a control mechanism of catalytic activity via synthetic approaches of colloid nanoparticles, with possible application in rational design of nanocatalysts.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1998년도 PROCEEDINGS OF THE 14TH KACG TECHNICAL MEETING AND THE 5TH KOREA-JAPAN EMGS (ELECTRONIC MATERIALS GROWTH SYMPOSIUM)
• /
• pp.149-156
• /
• 1998

In this work, aiming at improvement of growth processes for the bulk GaAs single crystals, efforts have been made first in investigate thermodynamic properties of the Ga and As system and second to suggest that bulk GaAs crystals could be grown in principle with the single temperature zone only by determining the excess arsenic charge as a function of growth conditions. During crystal growth, this will be evaporized inside the growth chamber to induce the required inner pressure, instead of aesenic vapor pressure in the double temperature zone method, so as to be in equilibrium with the method, growth experiments have been prepared and carried out for dopes and undoped GaAs crystals with the newly built Bridgman system which was designed according to this principle. To compare the results to those of the double temperature zone method, the same numbers of GaAs crystals have been grown with both processes and all of them were characterized in single crystallinity, lattice defects and electrical properties. Especially, the relationship between growth conditions and crystal quality was discussed from the viewpoint of growth peculiarities with this method.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 춘계학술대회 논문집
• /
• pp.345-349
• /
• 2009

본 시험장치는 가스터빈엔진의 이론적 열역학 계산을 실제 성능시험을 통해 비교해보고 관련 교육기관, 연구소 등에 가스터빈 엔진의 작동 원리와 구조에 대한 기초지식을 제공하도록 개발되었다. 추력 30lbf급 마이크로 터보제트 엔진을 대상으로 하여 NI DAQ(데이터 수집)장치와 LabVIEW 프로그램을 이용하여 실시간 계측되는 데이터와 기준 엔진 성능 시뮬레이션 데이터를 비교 할 수 있는 프로그램을 개발하였다.

• Bulletin of the Korean Chemical Society
• /
• 제31권8호
• /
• pp.2223-2227
• /
• 2010

Reaction of [(bpy)Pd]$(PF_6)_2$ (bpy = 2,2'-bipyridine) with racemic bis(isonicotinoyl)-1,1'-bi-2-naphtholate (L) in acetone, and followed by addition of chloroform and solvent evaporation allows to form amorphous micro-bowl morphology consisting of $[(bpy)PdL]_2(PF_6)_4$ without any template or additive. In contrast, the reaction and recrystallization in acetone for 1 week produce parallel-piped single crystals consisting of $[(bpy)_3Pd_3({\mu}_3-HPO_4)_2](PF_6)_2$. The formations of micro-bowl and parallel-piped single crystal morphologies appear to be primarily associated with the kinetic and thermodynamic control, respectively. The formation of micro-bowls may be attributed to eruption of organic solvents. Cosolvent effects and chemical properties on the formation of micro-bowl morphology have been observed.

• 대한기계학회논문집B
• /
• 제25권12호
• /
• pp.1730-1738
• /
• 2001

This paper presents an overview of testing and analyzing field performance of a centrifugal chiller which has a rated capacity of 200 RT(703 kW). Field data of a chiller installed in the cleanroom research building of KIST has been collected far performance analysis. The operating data included start-up, shut-down, and quasi-static state where cooling capacity and compressor power consumption varied cyclically. It was found that the steady-state thermodynamic model could be applied to relate the cooling capacity and COP under quasi-static conditions. The results led to finding the required cooling load pattern and a possible energy saving method. This study provides a method of evaluating performance of a large capacity centrifugal chiller in which field test is necessary.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.366.1-366.1
• /
• 2014

The rare-earth oxides M2O3 (M=La, Pr, Gd) are good insulators due to their large band gap (3.9eV for Pr2O3, 5.6eV for Gd2O3), they have high dielectric constants (Gd2O3 K=16, La2O3 K=27, Pr2O3 K=26-30) and, compared to ZrO2 and HfO2, they have higher thermodynamic stability on silicon making them very attractive materials for high-K dielectric applications. Another attractive feature of some rare-earth oxides is their relatively close lattice match to that of silicon, offering the possibility of epitaxial growth and eliminating problems related to grain boundaries in polycrystalline films. Metal-organic chemical vapor deposition (MOCVD) has been preferred to PVD methods because of the possibility of large area deposition, good composition control and excellent conformal step coverage. Herein we report on the synthesis of rare-earth oxide complexes with designed alkoxide and aminoalkoxide ligand. These novel complexes have been characterized by means of FT-IR, elemental analysis, and thermogravimetric analysis (TGA).

• Progress in Superconductivity
• /
• 제3권1호
• /
• pp.5-12
• /
• 2001

Our experimental research focuses on manipulating pinning deflects to alter the phase diagram of vortex matter, creating new vortex phases. Vortex matter offers a unique opportunity for creating and studying these novel phase transitions through precise control of thermal, pinning and elastic energies. The vortex melting transition in untwinned YB $a_2$C $u_3$ $O_{7-}$ $\delta$/ crystals is investigated in the presence of disorder induced by particle irradiation. We focus on the low disorder regime, where a glassy state and a lattice state can be realized in the same phase diagram. We follow the evolution of the first order vortex melting transition line into a continuous transition line as disorder is increased by irradiation. The transformation is marked by an upward shift in the lower critical point on the melting line. With columnar deflects induced by heavy ion irradiation, we find a second order Bose glass transition line separating the vortex liquid from a Bose glass below the lower critical point. Furthermore, we find an upper threshold of columnar defect concentration beyond which the lower critical point and the first order melting line disappear together. With point deflect clusters induced by proton irradiation, we find evidence for a continuous thermodynamic transition below the lower critical point..