• 한국정밀공학회지
• /
• 제16권11호
• /
• pp.148-157
• /
• 1999

The objective of this study is to investigate the effect of three main chemical compositions(Mg, Zn, Si) on extrudability of 7xxx Al alloy with high tensile strength. A few Al alloys based on 7xxx alloys were metal mold cast with various weight*%) of Mg 0.3-1.2%, Zn 5.0-8.0% and Si 0.4-0.7%, to envestigate the effects of extrudability, as well as mechanical properties. To measure the extrudability of cast billets, maximum extrusion pressure and surface temperature at die exit before tearing occurs were obtained by experiment and simulation of thermo-viscoplastic F.E.M. Also the yield and tensile strength of extruded products were tested.

• Steel and Composite Structures
• /
• 제20권3호
• /
• pp.651-669
• /
• 2016

The behavior of shear connectors plays a significant role in maintaining the required strength of a composite beam in normal and hazardous conditions. Various types of shear connectors are available and being utilized in the construction industry according to their use. Channel connectors are a suitable replacement for conventional shear connectors. These connectors have been tested under different types of loading at ambient temperature; however, the behavior of these connectors at elevated temperatures has not been studied. This investigation proposes a numerical analysis approach to estimate the behavior of channel connectors under fire and compare it with the numerical analysis performed in headed stud and Perfobond shear connectors subjected to fire. This paper first reviews the mechanism of various types of shear connectors and then proposes a non-linear thermo-mechanical finite element (FE) model of channel shear connectors embedded in high-strength concrete (HSC) subjected to fire. Initially, an accurate nonlinear FE model of the specimens tested at ambient temperature was developed to investigate the strength of the channel-type connectors embedded in an HSC slab. The outcomes were verified with the experimental study performed on the testing of channel connectors at ambient temperature by Shariati et al. (2012). The FE model at ambient temperature was extended to identify the behavior of channel connectors subjected to fire. A comparative study is performed to evaluate the performance of channel connectors against headed stud and Perfobond shear connectors. The channel connectors were found to be a more economical and easy-to-apply alternative to conventional shear connectors.

• 대한기계학회논문집A
• /
• 제37권12호
• /
• pp.1567-1572
• /
• 2013

방사성동위원소 열전발전기는 장반감기 알파 혹은 베타 핵종에서 방출하는 하전입자를 차폐하여 방사선에너지를 열에너지로 전환하고 이때 발생하는 열전재료의 온도차를 이용하여 전력을 생산하는 시스템이다. 이 기술은 에너지 밀도가 높고 수명이 길며 신뢰성이 높아 우주개발, 국방 등 극한 환경에서 사용되는 장치, 센서 및 로봇 등의 에너지원으로 그 효용성이 매우 높다. 본 연구에서는 방사선 차폐해석 및 열전달 해석을 통하여 차폐체, 그리고 최대 온도구배를 가지는 열전재료의 형상과 배치를 결정하여 열전발전기 기초설계를 도출하였다.

• 폴리머
• /
• 제33권4호
• /
• pp.313-318
• /
• 2009

Bis(3-aminophenyl)sulfone(APS)과 불소 치환체(-$CF_3$)를 가지는 4,4'-(hexa-fluoroisopropylidene) diphthalic anhyide(6FDA)에 각각 다른 몰 비의 설폰기(-$SO_2$-)를 가지는 3,3',4,4'-diphenylsulfonetetracar-boxylic dianhydride(DSDA)를 함량 별로 공중합하여 폴리이미드(PI) 필름을 합성하였다. PI 필름은 폴리아믹산(PAA)을 열적 이미드화 방법으로 유리판 위에 용액 캐스팅(solution casting)하여 얻었다. 넓은 각 X-선 회절도(XRD), 전계 방사형 주사 전자 현미경(FE-SEM), 시차 주사 열량계(DSC), 열 중량 분석기(TGA), 만능 인장 시험기(UTM), 및 자외선-가시광선 흡광도기(UV-Vis. Spectrometer)를 사용하여 얻어진 PI 필름의 열적-기계적 성질, 모폴로지, 그리고 광학 투명도를 측정하였다. DSDA의 몰 비가 증가할수록 열적, 광학 투명도는 감소하였지만, 기계적 성질은 이와는 반대로 증가하였다. 하지만, 기존의 PI 필름에 비해서는 한층 우수한 광학 투명성을 보여주었다.

• 대한조선학회논문집
• /
• 제38권3호
• /
• pp.93-106
• /
• 2001

선체 구조에서 피로 손상을 받기 쉬운 용접 부위인 T형 이음부(T-joint) 및 호퍼 너클 이음부(hopper knuckle joint) 모델의 피로실험 및 선형탄성 파괴역학을 이용한 피로균열 진전해석을 수행하였다. 집중 응력(hot spot stress)을 적용하여 정의된 균열 개시수명(균열 깊이 1mm)을 기준으로 하는 통합된 S-N선도를 작성하였으며, 잔류응력을 고려한 피로균열 진전해석을 통하여 피로균열 진전수명을 정확히 예측할 수 있었다. 또한, 임의의 형상을 가지는 용접 이음부(weld joint)의 피로균열 진전수명에 대한 정량화의 가능성을 확인하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권8호
• /
• pp.938-945
• /
• 2005

The microstructure evolution in hot forging process is composed of dynamic recrystallization during deformation as well as grain growth during dwell time. Therefore, the control of forging parameters such as strain, strain rate. temperature and holding time is important because the microstructure change in hot working affects the mechanical properties. Modeling equations are developed to represent the flow curve. grain size. recrystallized volume fraction and grain growth phenomena by various tests. The developed modeling equations were combined with thermo-viscoplastic finite element modeling to predict the microstructure change evolution during hot forging process. The large exhaust valve spindle (head diameter of 512mm) was simulated by closed die forging with hydraulic press and cooled in air after forging. The preform was heated to each 1080 and 1150$^{\circ}C$. Numerical calculation was performed by DEFORM-2D. a commercial finite element code. Heat transfer can be coupled with the deformation analysis in a non-isothermal deformation analysis. In order to obtain the fine and homogeneous microstructure and good mechanical properties in forging. the FEM would become a useful tool in the simulation of the microstructure development. In forging, appropriate temperature, strain and strain rate and rapid cooling are required to obtain the fine grain microstructure The optimal forging temperature and effective strain range of Nimonic 80A for large exhaust valve spindle are about 1080$\∼$l120$^{\circ}C$ and 150$\∼$200$\%$.