• 전자공학회논문지SC
• /
• 제43권6호
• /
• pp.33-39
• /
• 2006

적, 녹, 청색 3파장 LED를 적용한 LCD 백라이트 조명은 백색 LED를 적용한 것에 비해 넓은 색재현성과 LCD 투과율을 실현할 수 있으나, 온도 변화에 따른 휘도 저하와 색좌표 변동 문제 등의 신뢰성을 확보하지 않으면 안된다. 본 논문에서는 정전류 전원을 사용하는 소형 3파장 LED 백라이트 조명에 온도 보상 소자로서 써미스터를 사용한 저가형 온도 보상 장치에 대해 소개하고, 설계 및 실험 결과를 나타내었다. 이 방법에 의해 휘도 저하율을 54% 개선하였고, 색좌표 변동율을 51% 줄일 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 C
• /
• pp.987-990
• /
• 1999

본 연구에서는 $BaTiO_3$를 기본 조성으로 하여 PTC 써미스터를 제조하였으며 여기에 첨가제로서 Ca, Mn, Nb의 양을 순차적으로 변화시켜 미세구조 및 전기적 특성을 연구하였다. 또한 복소 임피던스 측정을 통해서 PTC 효과에 미치는 주 저항 성분에 대해서 고찰하였다. Ca 첨가 실험에서는 5[mol%] 첨가된 시편에서 $2.3{\times}10^7[\Omega{\cdot}cm]$의 높은 peak 비저항이 나왔으며 Mn과 Nb에서는 각각 0.1[mol%], 0.2[mol%]에서 $1.5{\times}10^8[\Omega{\cdot}cm]$와 $3.71{\times}10^9[\Omega{\cdot}cm]$의 수치가 측정되었다. 또한 Nb 첨가 실험에서는 첨가량이 증가할수록 결정립의 크기가 조밀해지는 현상을 보였다. PTC 효과에 미치는 주 저항 요소에 대해서 관찰한 복소 임피던스 측정에서는 결정립계 저항 성분이 주가 됨을 확인 하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.35-38
• /
• 2005

The effect of reduction and re-oxidation firing on the PTCR properties of Sm-doped Barium Titanate ceramics was investigated for the application of multilayered PTC thermistor. The lattice parameter a, c decreases monotonically with increasing oxygen concentration in the reoxidation atmosphere, which seems to be related with the electrostatic Coulomb interaction between oxygen vancancy and nearest other atoms. With increasing oxygen concentration, the resistivity at room temperature and the magnitude of resistivity jump as a function of temperature increased in the region of oxygen concentration of 0 $\sim$ 10%. However, the resistivity at room temperature and the magnitude of resistivity jump is nearly constant and saturated in the region of oxygen concentration of 10 $\sim$ 20%. These phenomena is considered to be related with the variation of oxygen and barium-vancany concentration near the grain boundary.

• 센서학회지
• /
• 제18권2호
• /
• pp.147-153
• /
• 2009

A thermal flow sensor has been fabricated and characterized, consisting of a center resistive heater surrounded by two upstream and one downstream temperature sensing resistors. The heater and temperature sensing resistors are fabricated from nitrogen-doped(n-type) polycrystalline silicon carbide(poly-SiC) deposited by LPCVD(low pressure chemical vapor deposition) on LPCVD silicon nitride films on a Si substrate. Cavities were etched into the Si substrate from the front side to create suspended silicon nitride membranes carrying the poly-SiC elements. One upstream sensor is located $50{\mu}m$ from the heater and has a sensitivity of $0.73{\Omega}$/sccm with ${\sim}15\;ms$ rise time in a dynamic range of 1000 sccm. N-type poly-SiC has a linear negative temperature coefficient and a TCR(temperature coefficient of resistance) of $-1.24{\times}10^{-3}/^{\circ}C$ from room temperature to $100^{\circ}C$.

• Journal of Preventive Medicine and Public Health
• /
• 제6권1호
• /
• pp.65-70
• /
• 1973

The study in the fild of medical instrument has been out of the interest by any of the life scientist in Korea. Especially, the recent developments in the medical electromics are remarkable one. Authors planned this study to ascertain the possibility of setting up the thermister thermometer with available accessories of demestic prouducts including some specific foreign assembly parts. By proper use of the thermister as one of the wheatstone bridge, we could detect tile resistance variations due to the environmental temperature variace. The intensive care for the bridge circuit and compensation scheme was required. The calibration procedure adopted here makes it possible to read the current as the temperature. The temperature range was determined by the examination and construction of the graph of the resistance-temperature variation. The determination of electric current, available ambient-temperature, the reduction of excessive current and self-heating of the thermister were made. Renovation in response-velocity was under taken too. This electronic thermometer was designed and assembled by the circuitry developed in accordance with the maximum availability of domestic products with some foreign-made parts. The result of our experiment showed very stable function and proved to be the most promissing item in the actual application as long as the thermistor thermister is concerned.

• 한국물환경학회지
• /
• 제31권4호
• /
• pp.367-376
• /
• 2015

The momentum and kinetic turbulent energy carried by the wind to a stratified lake lead to basin-scale motions, which provide a major driving force for vertical and horizontal mixing. A three-dimensional (3D) hydrodynamic model was applied to Lake Tahoe, located between California and Nevada, USA, to simulate the dominant basin-scale internal waves in the deep lake. The results demonstrated that the model well represents the temporal and vertical variations of water temperature that allows the internal waves to be energized correctly at the basin scale. Both the model and thermistor chain (TC) data identified the presence of Kelvin modes and Poincare mode internal waves. The lake was weakly stratified during the study period, and produced large amplitude (up to 60 m) of internal oscillations after several wind events and partial upwelling near the southwestern lake. The partial upwelling and followed coastal jets could be an important feature of basin-scale internal waves because they can cause re-suspension and horizontal transport of fine particles from nearshore to offshore. The internal wave dynamics can be also associated with the distributions of water quality variables such as dissolved oxygen and nutrients in the lake. Thus, the basin-scale internal waves and horizontal circulation processes need to be accurately modeled for the correct simulation of the dissolved and particulate contaminants, and biogeochemical processes in the lake.

• 전기학회논문지
• /
• 제65권5호
• /
• pp.862-867
• /
• 2016

In this study, the embroidery textile conductive wire of conductive yarn was designed into the wearable integrated clothing for sensing the infant's body temperature. To develop a high quality of the stable fiber-based textile conductive wire, firstly the five types of conductive yarns were twisted or covering polyester yarns and the coated conductive fiber with silver(Ag) or iron(Fe). As a result of comparative conductivity in conductive yarns of yarn processing, the 250 denier of conductive yarns with $0.74{\Omega}$/1~5cm were proposed and used for the integrated embroidery textile conductive wire for sensing. During experiments using the proposed embroidery textile conductive wire, measured resistance of thermistor according to the body temperature was correctly delivered to amplifier module, and showed feasible reliability of temperature sensing. As a wearable application, conductive yarns which takes forms of embroidery textile conductive wire would seems to be reliable as a conductive wire and could be replaced by the conductive metal wires.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 전력전자학술대회
• /
• pp.536-538
• /
• 2018

This paper introduces an enhanced interleaved (IL) PFC (Power Factor Correction) boost converter typed 650V Intelligent Power Module (IPM), which is fully optimized hybrid IGBT converter modules; Silicon (Si) IGBT and Silicon Carbide (SiC) diode, for up to 10kW HVAC (Heating, Ventilation, and Air Conditioning) systems. It utilizes newly developed $4^{th}$ Generation Field Stop (FS) trench IGBTs, $EXTREMEFAST^{TM}$ anti-paralleled diodes, SiC Junction Barrier Schottky (JBS) diodes, Bridge rectifiers, Multi-function LVIC, and Built-in thermistor provide good reliable characteristics for the entire system. This module also takes technical advantage of DBC (Direct Bonded Copper) substrate for the better thermal performance. It is shown that the Si IGBT/SiC diode hybrid IL PFC module can achieve excellent EMI performance and greatly enhance the power handling capability or switching frequency of various applications compared to the Si IGBT/Diode. This paper provides an overall description of the newly developed 650V/50A Hybrid SiC IL PFC IPM product.

• 제어로봇시스템학회논문지
• /
• 제11권4호
• /
• pp.314-321
• /
• 2005

In this paper an intelligence embedding quadruped pet robot is described. It has 15 degrees of freedom and consists of various sensors such as CMOS image, voice recognition and sound localization, inclinometer, thermistor, real-time clock, tactile touch, PIR and IR to allows owners to interact with pet robot according to human's intention as well as the original features of pet animals. The architecture is flexible and adopts various embedded processors for handling sensors to provide modular structure. The pet robot is also used for additional purpose such like security, gaming visual tracking, and research platform. It is possible to generate various actions and behaviors and to download voice or music files to maintain a close relation of users. With cost-effective sensor, the pet robot is able to find its recharge station and recharge itself when its battery runs low. To facilitate programming of the robot, we support several development environments. Therefore, the developed system is a low-cost programmable entertainment robot platform.

• 대한화학회지
• /
• 제18권2호
• /
• pp.143-149
• /
• 1974

從來에 開發된 cryoscopy 裝置는 手動型으로서 一回測定에 所要되는 最少 한時間을 두사람이 測定에 꼬박 關與하여야 하는 不便을 갖는다. 뿐만 아니라 手動攪拌에 依한 不規則的攪拌速度에서 오는 誤差나, Beckmann 溫度計의 感溫部가 나타내는 큰 熱容量 및 判讀時의 視角差차와 波勞度에서 오는 誤差等이 不可避하게 作用한다. 그러므로 本 硏究에서는 이들 誤差를 減少시키기 爲하여 다음과 같이 裝置改良에 依한 自動測定法을 開發하였다. (1) 水槽溫度의 自動精密調節 (2) 感溫部의 熱容量이 매우 작은 thermistor에 依한 溫度測定 (3) 檢流計의 反射光을 感光紙에 照射시켜 轉移溫度를 自動記錄하는 이른바 溫度自動記錄裝置의 開發 (4) 攪拌裝置의 自動化 한편 從前부터 使用되어 오는 10水和物 芒硝는 加入時 一部가 容器壁에 묻어 反應에 關與하지 못하며, 또한 10水和物화물을 部分的으로나마 脫水되지 않은채 保存하여 測定에 使用하기는 어려우므로 本硏究에서는 無水芒硝를 써서 하는 實驗條件을 아울러 究明하였다.