• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2001년도 춘계학술발표회 초록집
• /
• pp.72-72
• /
• 2001

Plasma polymerized thin films have been deposited on Si(lOO) substrates at $25-400^{\circ}C$ using thiophene ($C_4H_4S$) precursor by plasma assisted chemical vapor deposition (PACVD) method for low-dielectric device application. In order to compare physical properties of the as-grown thin films, the effects of the plasma power, gas flow ratio and deposition temperature on the dielectric constant and thermal stability were mainly studied. XRD and TED studies revealed that the as-grown thin films have highly oriented amorphous polymer structure. XPS data showed that the polymerized thin films that grown under different RF power and deposition temperature as well as different gas ratio of $Ar:H_2$ have different stoichiometric ratio of C and S compared with that of monomer, indicating a formation of mixture polymers. Moreover, we also realized that oxygen free and thermally stable polymer thin films could be grown at even $400^{\circ}C$. The results of SEM, AFM and TEM showed that the polymer films with smooth surface and sharp interface could be grown under various deposition conditions. From the electrical property measurements such as I-V and C-V characteristics, the minimum dielectric constant and the best leakage current were obtained to be about 3.22 and $10-11{\;}A/\textrm{cm}^2$, respectively.

• 전기전자학회논문지
• /
• 제27권1호
• /
• pp.19-24
• /
• 2023

약 1.12 ev의 밴드갭 에너지를 갖는 실리콘은 동작 온도가 250 ℃ 이하로 제한되어, 밴드갭 에너지가 큰 SiC 기판을 이용한 MIS(metal-insulator-semiconductor) 구조의 시료를 제작하여 고온에서 수소 응답 특성을 고찰하였다. 적용된 유전체 박막은 수소가스에 대해 침투성이 강하고 고온에서 안정성을 보이는 탄탈륨 산화막(Ta₂O₅)으로, 스퍼터링으로 증착된 탄탈륨(Ta)을 900 ℃의 온도에서 급속열산화법(RTO)으로 형성하였다. 이렇게 형성된 탄탈륨 산화막은 TEM, SIMS, 및 누설전류 측정을 통해, 두께, 원소들의 깊이 분포 및 절연특성을 분석하였다. 수소가스 응답특성은 0부터 2,000 ppm의 수소가스 농도에 대해, 상온으로부터 200와 400 ℃의 온도에서 정전용량의 변화로 평가하였다. 그 결과, 시료로부터 감도가 우수하고, 약 60초의 응답 시간을 나타내는 특성을 확인하였다.

• 한국지반공학회논문집
• /
• 제26권7호
• /
• pp.71-80
• /
• 2010

지리학적 특성으로 국내는 계절 동토지역으로 겨울철에는 동상현상이 발생하고 봄철에는 지반이 해빙된다. 도로는 다양한 재료와 단면으로 구성된 구조물이기 때문에 환경성과 재료 물성뿐만 아니라 포장체 각 층의 구조적 적정성 또는 지지력을 파악하는 것이 무엇보다 중요하다. 현재 기존 동상방지층 설계법에 따르면, 동상방지층은 포장체의 구조적 적정성과는 무관하게 온도조건에 따른 동결깊이에 따라 일률적으로 결정되고 있다. 이러한 동결깊이를 포장구조설계에 적용함으로써 포장의 과다설계 우려가 있다. 따라서 본 논문에서는 노상층, 동상방지층, 보조기층의 역학적 실험을 실시하여 동상민감성을 판단하고 실규모 현장도로 모형축소 실험을 실시하였다. 동상민감성을 판단하기 위하여 토층별 온도, 동결팽창량, 부동수분 및 동결깊이를 측정하였다.

• 한국수소및신에너지학회논문집
• /
• 제34권2호
• /
• pp.91-99
• /
• 2023

Participation in power trading using surplus power is considered a business model active in the domestic energy trade market, but it is limited only if the legal requirements according to the type, capacity, and use of the facilities to be applied for are satisfied. The hydrogen residential demonstration model presented in this paper includes solar power, energy storage system (ESS), fuel cell, and water electrolysis facilities in electrical facilities for private use with low-voltage power receiving system. The concept of operations strategy for this model focuses on securing the energy self-sufficiency ratio of the entire system, securing economic feasibility through the optimal operation module installed in the energy management system (EMS), and securing the stability of the internal power balancing issue during the stand-alone mode. An electric facility configuration method of a hydrogen residential complex demonstrated to achieve this operational goal has a structure in which individual energy sources are electrically connected to the main bus, and ESS is also directly connected to the main bus instead of a renewable connection type to perform charging/discharging operation for energy balancing management in the complex. If surplus power exists after scheduling, participation in power trading through reverse transmission parallel operation can be considered to solve the energy balancing problem and ensure profitability. Consequentially, this paper reviews the legal regulations on participation in electric power trading using surplus power from hydrogen residential models that can produce and consume power, gas, and thermal energy including hybrid distributed power sources, and suggests action plans.

• 멤브레인
• /
• 제33권3호
• /
• pp.137-147
• /
• 2023

본 연구에서는 현탁중합을 통해 이온교환입자를 합성하였다. 또한 음이온 교환막을 제조하기 위해 brominated poly(phenylene oxide) (Br-PPO)로 교환막 합성을 진행하였으며, 합성한 이온교환입자를 Br-PPO에 첨가하여 음이온 교환막에 성능을 향상시키고자 하였고, 이를 적용하여 음이온 교환막 연료전지 시스템의 성능 평가를 진행했다. 이온교환입자는 FT-IR, TGA 및 UTM을 통해 구조 분석, 열적 기계적 특성을 평가하였다. Br-PPO는 NMR을 통해 화학적 구조 분석 및 합성여부를 확인하였고, 음이온 교환막 연료 전지 셀 테스트를 진행하기 전 이온전도도와 이온교환용량, 팽윤도 및 수분함수율을 측정해 연구되고 있는 다른 음이온 교환막들과 비교를 통해 성능을 평가했다. 최종적으로 가장 성능이 우수했던 이온교환입자를 0.7 wt%를 첨가한 Br-PPO-TMA- SDV 음이온 교환막을 연료전지 시스템에 도입하여 상용 막인 FAA-3-50과 성능을 비교했다.

• Advances in nano research
• /
• 제15권5호
• /
• pp.385-399
• /
• 2023

Hexagonal boron nitride (h-BN), commonly referred to as Boron Nitride Nanoribbons (BNNRs), is an electrical insulator characterized by high thermal stability and a wide bandgap semiconductor property. This study delves into the electronic properties of two BNNR configurations: Armchair BNNRs (ABNNRs) and Zigzag BNNRs (ZBNNRs). Utilizing the nearest-neighbour tight-binding approach and numerical methods, the electronic properties of BNNRs were simulated. A simplifying assumption, the Hamiltonian matrix is used to compute the electronic properties by considering the self-interaction energy of a unit cell and the interaction energy between the unit cells. The edge perturbation is applied to the selected atoms of ABNNRs and ZBNNRs to simulate the electronic properties changes. This simulation work is done by generating a custom script using numerical computational methods in MATLAB software. When benchmarked against a reference study, our results aligned closely in terms of band structure and bandgap energy for ABNNRs. However, variations were observed in the peak values of the continuous curves for the local density of states. This discrepancy can be attributed to the use of numerical methods in our study, in contrast to the semi-analytical approach adopted in the reference work.

• 마이크로전자및패키징학회지
• /
• 제29권4호
• /
• pp.41-47
• /
• 2022

Ag sintering technologies have received great attention as it was applied to the inverter of Tesla's electric vehicle Model III. Ag sinter bonding technology has advantages in heat dissipation design as well as high-temperature stability due to the intrinsic properties of the material, so it is useful for practical use of SiC and GaN devices. This study was carried out to understand the sinter joining temperature effect on the robust Ag sintered joints in air without pressure within 10 min. Electroplated Ag finished Cu dies (3 mm × 3 mm × 2 mm) and substrates (10 mm × 10 mm × 2 mm) were introduced, respectively, and nano Ag paste was applied as a bonding material. The sinter joining process was performed without pressure in air with the bonding temperature as a variable of 175 ℃, 200 ℃, 225 ℃, and 250 ℃. As results, the bonding temperature of 175 ℃ caused 13.21 MPa of die shear strength, and when the bonding temperature was raised to 200 ℃, the bonding strength increased by 157% to 33.99 MPa. When the bonding temperature was increased to 225 ℃, the bonding strength of 46.54 MPa increased by about 37% compared to that of 200 ℃, and even at a bonding temperature of 250 ℃, the bonding strength exceeded 50 MPa. The bonding strength of Ag sinter joints was directly influenced by changes in the necking thickness and interfacial connection ratio. In addition, developments in the morphologies of the joint interface and porous structure have a significant effect on displacement. This study is systematically discussed on the relationship between processing temperatures and bonding strength of Ag sinter joints.

• 한국재료학회지
• /
• 제34권5호
• /
• pp.223-234
• /
• 2024

This review explores the potential of pillared bentonite materials as solid acid catalysts for synthesizing diethyl ether, a promising renewable energy source. Diethyl ether offers numerous environmental benefits over fossil fuels, such as lower emissions of nitrogen oxides (NO_x) and carbon oxides (CO_x) gases and enhanced fuel properties, like high volatility and low flash point. Generally, the synthesis of diethyl ether employs homogeneous acid catalysts, which pose environmental impacts and operational challenges. This review discusses bentonite, a naturally occurring alumina silicate, as a heterogeneous acid catalyst due to its significant cation exchange capacity, porosity, and ability to undergo modifications such as pillarization. Pillarization involves intercalating polyhydroxy cations into the bentonite structure, enhancing surface area, acidity, and thermal stability. Despite the potential advantages, challenges remain in optimizing the yield and selectivity of diethyl ether production using pillared bentonite. The review highlights the need for further research using various metal oxides in the pillarization process to enhance surface properties and acidity characteristics, thereby improving the catalytic performance of bentonite for the synthesis of diethyl ether. This development could lead to more efficient, environmentally friendly synthesis processes, aligning with sustainable energy goals.

• Nuclear Engineering and Technology
• /
• 제56권1호
• /
• pp.301-308
• /
• 2024

Ceramic materials are being explored as alternatives to toxic lead sheets for radiation shielding due to their favorable properties like durability, thermal stability, and aesthetic appeal. However, crafting effective ceramics for radiation shielding entails complex processes, raising production costs. To investigate local viability, this study evaluated Malaysian ceramic tiles for shielding in diagnostic X-ray rooms. Different ceramics in terms of density and thickness were selected from local manufacturers. Energy Dispersive X-ray Fluorescence (EDXRF) and X-ray Fluorescence (XRF) characterized ceramic compositions, while Monte Carlo Particle and Heavy Ion Transport code System (MC PHITS) simulations determined Linear Attenuation Coefficient (LAC), Half-value Layer (HVL), Mass Attenuation Coefficient (MAC), and Mean Free Path (MFP) within the 40-150 kV energy range. Comparative analysis between MC PHITS simulations and real setups was conducted. The C3-S9 ceramic sample, known for homogeneous full-color structure, showcased superior shielding attributes, attributed to its high density and iron content. Notably, energy levels considerably impacted radiation penetration. Overall, C3-S9 demonstrated strong shielding performance, underlining Malaysia's potential ceramic tile resources for X-ray room radiation shielding.

• 지구물리와물리탐사
• /
• 제26권1호
• /
• pp.18-30
• /
• 2023

해저 진흙화산은 유동화/기화된 퇴적물이 표층으로 분출하여 만들어진 화산과 유사한 지형이다. 진흙화산은 지하의 열, 퇴적물이나 탄화수소를 지상으로 공급하는 공급원으로 관심을 받고 있다. 북극 캐나다 보퍼트 해의 대륙사면에는 다양한 수심에서 진흙화산이 존재한다고 알려져 있다. 수심 420 m에 위치한 MV420 진흙화산은 현재 분출하고 있는 활동성 진흙화산으로 많은 연구 대상이 되고 있다. 극지연구소에서는 쇄빙연구선 아라온호를 이용하여 MV420을 통과하는 고해상도 다중채널 탄성파 자료를 획득하였고, 진흙 분출구 주변에서 지열 관측을 수행하였다. 탄성파 자료에서는 가스하이드레이트에 의한 해저면모사반사파(bottom simulating reflector, BSR)로 추정되는 역위상 반사파를 확인하였다. 탄성파 자료의 BSR이 가스하이드레이트에 의한 반사파인지 확인하기 위하여, 정상 상태의 열방정식을 바탕으로 MV420 내부의 열구조를 수치적으로 모사하였다. 그리고 모사한 지열온도 모델을 이용하여 가스하이드레이트 안정영역의 하부 경계를 추정하였다. BSR의 깊이와 가스하이드레이트 안정영역의 하부 경계를 비교한 결과, 두 자료가 일치하며 이는 가스하이드레이트의 부존을 암시하는 지구물리학적 증거 중의 하나이다. 선행 연구 결과는 MV420의 분출구에서 표층에 가스하이드레이트가 부존한다는 것을 보여주었으며, 이번 연구의 결과는 분출구와의 거리에 따라 최대 50 m 깊이까지 가스하이드레이트가 존재할 수 있음을 시사한다.