• Bulletin of the Korean Chemical Society
• /
• 제32권2호
• /
• pp.498-502
• /
• 2011

The divergent synthesis of novel phosphorus-containing dendrimer with 4,4'-sulphonyldiphenol at the core has been accomplished involving simple condensation reactions using $P(O)Cl_3$, $P(S)Cl_3$, 3-amino-phenol, 3-hydroxy-benzaldehyde, and 2-butyn 1, 4-diol. The final compound was a Schiff's base macromolecule possessing 4 imine bonds, 8 acetylenic bonds and 8 OH groups at the periphery. The structures of intermediate compounds were confirmed by IR, NMR ($^1H$, $^{13}C$ and $^{31}P$), LC-Mass and C, H, N analysis. The structure of the final dendrimer (5) was confirmed by IR, NMR ($^1H$, $^{13}C$ and $^{31}P$), MALDI-TOF-MS, and C, H, N analysis. The surface morphological characteristics of the final dendrimer were understood by Scanning Electronic Microscopic study (SEM). The thermal stability of the final dendrimer was studied by TGA/DTA analysis.

• Macromolecular Research
• /
• 제16권5호
• /
• pp.467-472
• /
• 2008

Rigid polyurethane foams (RPUFs) were fabricated from crude MDI (CMDI) and polypropylene glycols (PPGs) of various isocyanate indices with a physical blowing agent (HFC 365mfc). There was a tendency for the gel time to decrease and the tack-free time to increase with increasing index value. With increasing index value the foam density and compression strength decreased and the glass transition temperature, dimension stability and thermal insulation increased, while the cell size and closed cell content were virtually unchanged. Allophanate crosslinks and condensation reactions between the isocyanate groups, which are favored with a high index value, exerted significant effects on the properties of RPUFs.

• 한국태양에너지학회 논문집
• /
• 제26권1호
• /
• pp.57-64
• /
• 2006

Cr-CrO cermet solar selective coatings with a double cermets layer film structure were prepared using a special direct current (dc) magnetron sputtering technology. The typical films structures from surface to bottom substrate were measured to be an $Al_2O_3$ anti-reflection layer on a double Cr-CrO cermet layer on an Al metal infrared reflection layer. Optical properties of optimized Cr-CrO cermet solar selective coating were absorptance (${\alpha}$) = 0.95 and emittance (${\varepsilon}$) = 0.10 ($100^{\circ}C$). Atomic force microscopy (AFM) image showed that Cr-CrO cermet film was very smooth and their grain size was also very small The results of thermal stability test showed that the Cr-CrO cermet solar selective coatings were stable for use at temperature of $400^{\circ}C$.

• 생명과학회지
• /
• 제10권3호
• /
• pp.279-285
• /
• 2000

cAMP 수용성 단백질인 CRP는 Escherichia coli에서 대사와 관련된 유전자의 전사를 조절한다. 본 연구는 야생형과 돌연변이 CRP 단백질의 열적 안정성과 온도에 따른 단백질의 구조변화를 관찰하기 위 하여 proteolytic digestion, UV spectrophotometer, CD spectrapolarimeter 등의 방법을 사용하였다. cAMP가 없을 때에는 야생형, S83G, S128A CRP가 열적 안정성에서 큰 차이를 보이지 않았지만, cAMP가 존재할 때 야생형 CRP가 다른 돌연변이 CRP보다 열적으로 더욱 안정함을 보였다. 그리고 protease digestion 실험을 통하여 높은 온도에서 cAMP의 존재와 무관하게 돌연변이 CRP에서 단백질 의 변성으로 인한 절단된 단백질띠를 관찰할 수 있었다. 그리고 55$^{\circ}C$에서 측정한 CD 스펙트럼에서 단백 질의 2차 구조인 $\alpha$-helix 구조가 부분적으로 파괴되었음이 관찰되었다.

• 전기학회논문지
• /
• 제68권1호
• /
• pp.69-76
• /
• 2019

Microheaters with different structures were fabricated and compared to find an optimal configuration enhancing the performances of $C_2H_2$ gas sensor. Three temperature sensors were integrated on the surface of the insulation layer over the microheater, and resistance changes were observed to check the generated heat from the microheater. A low operating voltage of 1mV was applied to the temperature sensor to minimize any influence of thermal heat from the resistance type temperature sensor, whereas high voltages in the range between 10 and 20V were applied to the microheater. A microheater structure generating maximum heat at low voltage was determined. The generated heat was verified by the temperature sensors on the top of the $Si_3N_4$ and infrared camera. A long term stability and accuracy of the microheater were observed. The developed microheater was applied to enhance the performances of $C_2H_2$ gas sensor and successfully confirmed that the developed microheater greatly contributes to the improvement of sensitivity and selectivity of gas sensor.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.244.1-244.1
• /
• 2015

The Ag Nanowire is one of the materials that are widely studied as alternatives to ITO and is available for large area, low cost process and the flexible transparent electrode. However, Ag nanowire can have the problem of a lack of stability at high temperatures, making this impossible to form a film. Using a structure of ITO/AgNW/ITO in photodetector device, we improved the properties of the ITO in the IR region and improved the thermal stability of the AgNW. The structure of ITO/AgNW/ITO has a high transmittance value of 89% at a wavelength of 900 nm and provide a good electrical property. The AgNWs embedded ITO film has a high transmittance, this is because of the light scattering from the AgNW. The thermal stability of the developed ITO/AgNWs/ITO films were investigated and found AgNWs embedded ITO films posses considerable high stability compared to the solo AgNWs on the Si surface. The ITO/AgNWs/ITO device showed a improved photo-response ratio compared to those of the conventional TC device in IR region. This is attributed to the high transmittance and low sheet resistance. We suggest an effective design scheme for IR-sensitive photodetection by using an AgNW embedded ITO.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.910-913
• /
• 2003

In order to enhance performance, stability, and brightness of inorganic blue-light emitting EL device, barrier layer structure and pulsed laser annealing(PLA) treatment were introduced. The barrier layer structure was utilized for improving brightness of the device and instead of thermal annealing, pulsed laser annealing process was used. From this study, optimum barrier layer thickness and number of pulsed laser irradiation are established.

• Bulletin of the Korean Chemical Society
• /
• 제29권7호
• /
• pp.1412-1414
• /
• 2008

• Composites Research
• /
• 제18권4호
• /
• pp.14-20
• /
• 2005

방향족아민 경화제의 벤젠링 사이의 관능기 변화가 반응특성, 기계적특성 및 열적특성에 미치는 영향을 고찰하기 위하여 범용 에폭시수지인 DGEBF와 방향족아민 경화제 DDM, DDS 각각을 1:1의 당량비로 혼합하여 동일한 조건으로 경화하였다. 그 결과 에폭시수지 경화물의 특성은 경화제의 벤젠링 사이의 관능기 구조에 따라 매우 큰 영향을 받았다. 즉, 벤젠링 사이에 길이가 길고 bulky한 술폰기를 포함한 DDS는 반응성, 열안정성, 밀도, shrinkage($\%$), 선팽창계수, 인장탄성율. 인장강도, 굴곡탄성율, 굴곡강도의 값이 벤젠링 사이에 메틸기를 가지는 DDM 경화물계 보다 높게 나타났지만, epoxide기의 전환율, 유리전이온도의 값은 낮게 나타냈다. 이것은 술폰기의 강한 전기음성도와 메틸기의 전기 양성적인 repulsive한 성질의 차이에 의한 영향인 것으로 판단된다. 굴곡 파단면의 관찰 결과는 DDS 경화물계의 각개 grain이 불규칙적으로 분포되어 있음을 확연하게 보여준다.

• Composites Research
• /
• 제17권5호
• /
• pp.47-53
• /
• 2004

본 연구에서는 열잠재성 양이온 촉매인 N-benzylpyrazinium hexafluoroantimonate (BPH)와 benryl-2,5-dimethylpyrazinium hexafluoroantimonate (BDPH)를 합성하였고, 이관능성 에폭시 수지(diglycidylether of bisphenol A, DGEBA)에 개시제로 1 wt.%의 촉매를 혼합하여 DSC, NIR TGA 그리고 DMA를 이용하여 경화거동과 열안정성을 알아보았다. 촉매의 잠재특성은 $100∼180^{\circ}$의 반응 온도에 따른 전환율을 near-IR로부터 조사하였다. NIR 분석으로부터, BPH에 의한 에폭시 수지의 전환율은 BDPH와 비교하여 높은 전환율을 나타내는 것을 확인할 수 있었다. 그리고 TGA 분석 결과, 초기 열분해 온도(IDT)와 적분 열분해 온도(IPDT)에 입각하여 DGEBA/BDPH 시스템의 열안정성이 DGEBA/BPH 시스템보다 상대적으로 낮은 값을 나타냈다. 이는 BDPH 구조의 입체 장애로 인해 BPH보다 열안정성 인자이 더 낮게 측정된 것으로 판단된다.