• Bulletin of the Korean Chemical Society
• /
• v.32 no.2
• /
• pp.498-502
• /
• 2011

The divergent synthesis of novel phosphorus-containing dendrimer with 4,4'-sulphonyldiphenol at the core has been accomplished involving simple condensation reactions using $P(O)Cl_3$, $P(S)Cl_3$, 3-amino-phenol, 3-hydroxy-benzaldehyde, and 2-butyn 1, 4-diol. The final compound was a Schiff's base macromolecule possessing 4 imine bonds, 8 acetylenic bonds and 8 OH groups at the periphery. The structures of intermediate compounds were confirmed by IR, NMR ($^1H$, $^{13}C$ and $^{31}P$), LC-Mass and C, H, N analysis. The structure of the final dendrimer (5) was confirmed by IR, NMR ($^1H$, $^{13}C$ and $^{31}P$), MALDI-TOF-MS, and C, H, N analysis. The surface morphological characteristics of the final dendrimer were understood by Scanning Electronic Microscopic study (SEM). The thermal stability of the final dendrimer was studied by TGA/DTA analysis.

• Macromolecular Research
• /
• v.16 no.5
• /
• pp.467-472
• /
• 2008

Rigid polyurethane foams (RPUFs) were fabricated from crude MDI (CMDI) and polypropylene glycols (PPGs) of various isocyanate indices with a physical blowing agent (HFC 365mfc). There was a tendency for the gel time to decrease and the tack-free time to increase with increasing index value. With increasing index value the foam density and compression strength decreased and the glass transition temperature, dimension stability and thermal insulation increased, while the cell size and closed cell content were virtually unchanged. Allophanate crosslinks and condensation reactions between the isocyanate groups, which are favored with a high index value, exerted significant effects on the properties of RPUFs.

• Journal of the Korean Solar Energy Society
• /
• v.26 no.1
• /
• pp.57-64
• /
• 2006

Cr-CrO cermet solar selective coatings with a double cermets layer film structure were prepared using a special direct current (dc) magnetron sputtering technology. The typical films structures from surface to bottom substrate were measured to be an $Al_2O_3$ anti-reflection layer on a double Cr-CrO cermet layer on an Al metal infrared reflection layer. Optical properties of optimized Cr-CrO cermet solar selective coating were absorptance (${\alpha}$) = 0.95 and emittance (${\varepsilon}$) = 0.10 ($100^{\circ}C$). Atomic force microscopy (AFM) image showed that Cr-CrO cermet film was very smooth and their grain size was also very small The results of thermal stability test showed that the Cr-CrO cermet solar selective coatings were stable for use at temperature of $400^{\circ}C$.

• Journal of Life Science
• /
• v.10 no.3
• /
• pp.279-285
• /
• 2000

CRP (cyclic AMP receptor protein) regulate transcription of catabolite-sensitive genes in Escherichia coli. Wild-type and mutant CRP (S83G and S128A) proteins were used to measure the thermal stability and the temperature-dependent structural change by proteolytic digestion, UV spectrophotometer and CD spectrapolarimeter. The result indicated that wild-type CRP was more thermally stable than the mutant CRPs in the presence of cAMP. At a low temperature, wild-type CRP with cAMP was more sensitive to subtilisin than the mutant CRPs. At a high temperature, there was no difference of sensitivity to subtilisin among wild-type, S83G and S128A CRPs. CD spectra suggested that the secondary structure of CRP was destroyed partially at a high temperature.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.68 no.1
• /
• pp.69-76
• /
• 2019

Microheaters with different structures were fabricated and compared to find an optimal configuration enhancing the performances of $C_2H_2$ gas sensor. Three temperature sensors were integrated on the surface of the insulation layer over the microheater, and resistance changes were observed to check the generated heat from the microheater. A low operating voltage of 1mV was applied to the temperature sensor to minimize any influence of thermal heat from the resistance type temperature sensor, whereas high voltages in the range between 10 and 20V were applied to the microheater. A microheater structure generating maximum heat at low voltage was determined. The generated heat was verified by the temperature sensors on the top of the $Si_3N_4$ and infrared camera. A long term stability and accuracy of the microheater were observed. The developed microheater was applied to enhance the performances of $C_2H_2$ gas sensor and successfully confirmed that the developed microheater greatly contributes to the improvement of sensitivity and selectivity of gas sensor.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.244.1-244.1
• /
• 2015

The Ag Nanowire is one of the materials that are widely studied as alternatives to ITO and is available for large area, low cost process and the flexible transparent electrode. However, Ag nanowire can have the problem of a lack of stability at high temperatures, making this impossible to form a film. Using a structure of ITO/AgNW/ITO in photodetector device, we improved the properties of the ITO in the IR region and improved the thermal stability of the AgNW. The structure of ITO/AgNW/ITO has a high transmittance value of 89% at a wavelength of 900 nm and provide a good electrical property. The AgNWs embedded ITO film has a high transmittance, this is because of the light scattering from the AgNW. The thermal stability of the developed ITO/AgNWs/ITO films were investigated and found AgNWs embedded ITO films posses considerable high stability compared to the solo AgNWs on the Si surface. The ITO/AgNWs/ITO device showed a improved photo-response ratio compared to those of the conventional TC device in IR region. This is attributed to the high transmittance and low sheet resistance. We suggest an effective design scheme for IR-sensitive photodetection by using an AgNW embedded ITO.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.910-913
• /
• 2003

In order to enhance performance, stability, and brightness of inorganic blue-light emitting EL device, barrier layer structure and pulsed laser annealing(PLA) treatment were introduced. The barrier layer structure was utilized for improving brightness of the device and instead of thermal annealing, pulsed laser annealing process was used. From this study, optimum barrier layer thickness and number of pulsed laser irradiation are established.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.7
• /
• pp.1412-1414
• /
• 2008

• Composites Research
• /
• v.18 no.4
• /
• pp.14-20
• /
• 2005

To determine the effect of chemical structure of aromatic amino curing agents on thermal and mechanical properties, standard epoxy resin DGEBF (diglycidylether of bisphenol F) was cured with diaminodiphenyl methane (DDM) and diaminodiphenyl sulphone (DDS) in a stoichiometrically equivalent ratio. From this work the effect of aromatic amino curing agents on the thermal and mechanical properties is significantly influenced by the chemical structure of curing agents. In contrast, the results show that the DGEBF/DDS system having the sulfone structure between the benzene rings had higher values in the thermal stability, density, shrinkage ($\%$), thermal expansion coefficient, tensile modulus and strength, flexural modulus and strength than the DGEBF/DDM system having methylene structure between the benzene rings, whereas the DGEBF/DDS system presented low values in maximum exothermic temperature, conversion of epoxide, and grass transition temperature. These results are caused by the relative effects of sulfone group having strong electronegativity and methylene group having (+) repulsive property. The result of fractography shows that the grain distribution of DGEBF/DDS system is more irregular than that of the DGEBF/DDM system.

• Composites Research
• /
• v.17 no.5
• /
• pp.47-53
• /
• 2004

In this work, two thermal latent catalysts, i.e., N-benzylpyrazinium hexafluoroantimonate (BPH) and benzyl-2,5-dimethylpyrazinium hexafluoroantimonate (BDPH), were synthesized. The cure behaviors and thermal stabilities of diglycidylether of bisphenol A (DCEBA) epoxy resins initiated by 1 wt.% of the catalysts were investigated by DSC, NIR, TCA, and DMA Latent properties of the catalysts were examined by conversion of epoxy resins using NIR from $100^{\circ}C$ to $180^{\circ}C$ From the resultes of near-IR, DGEBA/BPH system showed higher conversion than that of DGEBA/BDPH system. The thermal stabilities of DGEBA/BDPH system based on the initial decomposition temperature (IDT) and integral procedural decomposition (IPDT) were relatively lower than those of DCEBA/BPH system. These could be attributed to the hindered structure of BDPH, resulting in decreasing the thermal stability in the DGEBA/BDPH system.