• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 가을 학술발표회 논문집
• /
• pp.125-132
• /
• 1998

In this study the fire, due to overturning of oil tanker on the bridge induced heat transfer analysis and thermal stress analysis are carried out. The results of analysis for fire history of 1 hour present very large thermal gradient near the surface. However, the temperature increase of tendon & rebar that is the main resistant member of bridge is not sufficient to change material properties. The Von-Mises yield criteria is used to calculate the depth of delamination, The depth of delamination is about 4cm at center of fire and this value is close to measured value.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.494-499
• /
• 2003

This paper concerns the static, dynamic and thermal characteristics analysis of a high-speed spindle system for horizontal machining centers with 45mm x50,000rpm. The spindle system is designed based on the angular contact ceramic ball bearings, built-in motor, oil-air lubrication method and oil jacket cooling method. The structural and thermal analysis models of spindle system are constructed by the finite element method. The static and dynamic characteristics are estimated based on the static deformation, modal parameter, mode shape and frequency response function, and the thermal characteristics are estimated based on the temperature rise, temperature distribution and thermal deformation. The analysis results illustrate that the designed spindle system has excellent structural and thermal stabilities

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.461-464
• /
• 2004

In this paper, the elastic epoxy added elastomer having viscoelasticity to existing epoxy was measured thermal, structural properties through TGA(Thermogravimetric Analysis) and FESEM(Field Emission Scanning Electron Microscope). Specimens were made of dumbbell forms by the ratio of 5[phr], 10[phr], 15[phr], and 20[phr] by regulation with elastomer contents. The measurement temperature dimensions of TGA were $0[^{\circ}C]\;to\;800[^{\circ}C]$, and rising temperature was $5[^{\circ}C/min]$. And we observed structure through FESEM at the magnification of 1000times with the voltage of 15[kV] after breaking by quenching specimens. As thermal analysis results, we could know that thermal and structural properties was improved quantity according to decrease of elastomer contents. In general, thermal, structural properties of 15[phr] was excellent among the specimens.

• 한국산업융합학회 논문집
• /
• 제21권5호
• /
• pp.191-195
• /
• 2018

By using an ANSYS product suite (CFX, Ansys Multiphysics), which is a powerful tool for multiphysics analysis of complicated physical phenomena, we performed a structural stress analysis based on fluid flow and heat transfer phenomena within a quick connect/disconnect (QC/DC) bellows system. Considering the extremely low temperatures in the QC/DC environment, an approach to the problem based on complex multi-physics phenomena, where different phenomena interact with each other, is crucial. Therefore, we use a numerical analysis technique where fluid-thermal-structural interactions are combined. In conclusion, when low temperature fluids flow inside bellows, the expected service life is conspicuously reduced due to the thermal stress caused by heat transfer. Therefore, in future research, a structure with considerably reduced thermal stress by robust design optimization will be derived.

• 한국기계가공학회지
• /
• 제7권4호
• /
• pp.76-81
• /
• 2008

A cryogenic butterfly valve is used to transfer the liquefied natural gas (LNG) which temperature is $-162^{\circ}C$. This valve is core part in the piping system using LNG. This paper performed coupling analysis using FEM to evaluate safety of cryogenic butterfly valve. Flow analysis is calculated numerically the CAE and CFD methods are useful to predict the thermal matter and the inner flow field of the valve. Thermal analysis and structural analysis used ANSYS Workbench.

• 한국위성정보통신학회논문지
• /
• 제2권1호
• /
• pp.21-26
• /
• 2007

탑재된 광학카메라 또는 영상레이더를 이용하여 지구관측 임무를 수행하는 저궤도 지구관측위성은 지상으로부터 수 백 km 고도의 궤도상에서 극심한 열하중을 받게 된다. 이로 인하여 구조체의 열변형이 발생하게 되고 결과적으로 구조체에 장착된 탑재체가 지상의 원하는 지점을 관측하지 못하는 문제점이 발생하게 된다. 이러한 열변형에 의한 탑재체의 지향방향의 변화를 열지향오차라고 한다. 열지향오차 해석은 열해석, 온도값 변환 및 구조해석의 세 단계로 수행된다. 본 논문에서는 열지향오차 해석을 통하여 위성의 임무수행 가능성을 기술하는것을 목적으로 하였다.

• Structural Engineering and Mechanics
• /
• 제33권6호
• /
• pp.781-784
• /
• 2009

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.1233-1234
• /
• 2010

• Structural Engineering and Mechanics
• /
• 제57권3호
• /
• pp.457-471
• /
• 2016

To analyze laminated composite and sandwich beams under temperature loads, a $C^0$-type Reddy's beam theory considering transverse normal strain is proposed in this paper. Although transverse normal strain is taken into account, the number of unknowns is not increased. Moreover, the first derivatives of transverse displacement have been taken out from the in-plane displacement fields, so that the $C^0$ interpolation functions are only required for the finite element implementation. Based on the proposed model, a three-node beam element is presented for analysis of thermal responses. Numerical results show that the proposed model can accurately and efficiently analyze the thermoelastic problems of laminated composites.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.1299-1300
• /
• 2013