• 대한기계학회논문집B
• /
• 제30권6호
• /
• pp.560-567
• /
• 2006

Although various conjectures have been proposed to explain abnormal increase in thermal conductivity of nanofluids, the detailed mechanism could not be understood and explained yet. The main reason is primarily due to the lack of knowledge on the most fundamental factor governing the mechanisms such as Brownian motion, liquid layering, phonon transport, surface chemical effects and agglomeration. By applying surface complexation model for the measurement data of hydrodynamic size, zeta potential, and thermal conductivity, we have shown that sulfate charge state is mainly responsible for the increase in the present condition and may be the factor incorporating all the mechanisms as well. Moreover, we propose a new model including concepts of fractal and interfacial layer. The properties such as thickness and thermal conductivity of the layer are estimated from the surface charge states and the concept of electrical double layer. With this, we could demonstrate the pH dependences of the layer properties and eventually of the effective thermal conductivity of the nanofluid.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권4호
• /
• pp.147-153
• /
• 2003

This paper describes the finite element analysis(FEA) for the design of electromagnet for Control Element Drive Mechanism(CEDM) in System-integrated Modular Advanced Reactor(SMART) and compared with the lifting power characteristics of prototype electromagnet. A thermal analysis was performed for the electromagnet. A model for the thermal analysis of the electromagnet was developed and theoretical bases for the model were established. It is important that the temperature of the electromagnet windings be maintained within the allowable limit of the insulation. since the electromagnet of CEDM is always supplied with current during the reactor operation. So the thermal analysis of the winding insulation which is composed of polyimide and air were performed by finite element method. As a result, it is shown that the characteristics of prototype electromagnet have a good agreement with the results of FEA. The thermal properties obtained here will be used as input for the optimization analysis of the electromagnet.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 추계학술대회 논문집
• /
• pp.675-676
• /
• 2006

• 연구논문집
• /
• 통권24호
• /
• pp.151-159
• /
• 1994

The heat transfer and thermal stress analysis was performed on the ceramic core of the matrix-type recuperator. The efficiency was calculated as 34% to 65%. Triple-pass arrangement provided higher preheated air temperatures, lower thermal stresses and the increase of pressure drops. Higher temperature gradients and maximum peak stresses appeared on the corners of the ceramic core. The effect of boundary conditions was significant and the use of spring-load sealing mechanism could release thermal stresses.

• 에너지공학
• /
• 제26권4호
• /
• pp.57-66
• /
• 2017

열은 전력과 같이 이동속도가 빠르지 못하고 전력에 비해 손실이 비교적 크게 발생하므로 전력거래와 같이 한개의 운용센터를 두고 열 연계 시스템을 운용하는 것은 현실성이 없다. 현재 열 연계가 모두 이루어지고 있는 한국지역난방공사의 경우에도 인접한 2~4개 정도의 열병합발전소간에만 열 거래가 이루어지고 있는 실정이다. 따라서 본 논문에서는 열 거래를 위한 통합운용센터를 몇 개의 권역으로 나누어 각 권역마다 권역의 Hub 통합운용발전소를 두고 운용하는 것이 열매체의 특성을 반영하는데 적정하고 타당한 것으로 판단하여 집단에너지 사업자간 열 연계 메커니즘을 제안하였다. 제안된 메커니즘에 최적으로 열 거래를 행할 수 있는 알고리즘을 개발하고 이를 실제 사업자에 적용하여 제안한 알고리즘의 유용성을 검증하였다.

• 한국항공우주학회지
• /
• 제41권11호
• /
• pp.921-930
• /
• 2013

(주)쎄트렉아이는 고해상도 전자광학카메라인 EOS-D Ver.1.0의 개발 및 검증을 성공적으로 완료하였다. EOS-D Ver.1.0 시스템은 기존 EOS-C 계열 대비 향상된 공간 해상도 및 방사학적 해상도를 갖도록 설계되었다. EOS-D Ver.1.0의 열제어계는 능동 열제어 방식과 수동 열제어 방식을 혼용하여 개발되었다. 또한, 광학계 주구조물의 수분 발산 효과에 의한 비정렬 상태를 보상할 수 있도록 초점 조절장치(refocusing mechanism)를 설계하고 이를 검증하였다. 설계를 바탕으로 실제 모델을 제작, 인증 수준의 열진공 시험을 통해 설계 여유(design margin)와 작업도(workmanship)를 확인하였다. 또한 열-수치 모델(TMM)에 대한 검증 작업을 수행하여 해석 모델이 실제 모델의 열적 특성을 잘 모사하고 있음을 확인하였다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권3호
• /
• pp.61-68
• /
• 2001

A linear motor has a lot of advantages in comparison with conventional feed mechanisms: high transitional speed, acceleration, high control performance and good positioning at high speed. Through the omission of a power transfer element, the linear motor shows no wear and no backlash, has along lifetime and is easy to assemble. Recently, the two types of linear motors, asynchronous and synchronous linear motors, are often applied to machine tools as a fast feed mechanism. In this paper, a comparison between the two types of linear motors as to power loss and thermal behavior is made. The heat sources of the linear motor-the electrical power loss in the motor and the frictional heat on the linear guidance-are measured and compared. Also, the temperature on the linear motor and machine structure is measured and presented.

• 한국추진공학회지
• /
• 제3권4호
• /
• pp.23-30
• /
• 1999

상안정화 질산암모늄(PSAN)의 열분해 특성에 대한 연구를 thermogravimetric analysis(TGA)를 사용하여 수행하였다. 본 연구에서는 질산칼륨과 산화아연이 상안정화제로 0%에서 8%사이에서 사용되었다. 열분해에 대한 속도론적 특성과 메카니즘들을 적분법을 사용하여 평가하였다. 활성화에너지(E)와 잦음율인자(A) 같은 열적 속도계수들은 상안정화제의 함량이 증가함에 따라 증가하였고, 분해 메카니즘 또한 변화되었다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2000년도 제20회 KOSCO SYMPOSIUM 논문집
• /
• pp.35-44
• /
• 2000

It was numerically studied that NOx emission characteristics of confined $CH_{4}$ jet flames with the variation of the diameter of inner fuel nozzle, the flow rate of $CH_{4}$ and equivalence ratio. Parabolic type equations were adopted in the calculation and GRI-2.1I mechanism was used for the chemical reaction. NOx emission index (EINOx) was introduced to evaluate NOx emission quantitatively in parametrically varied flames and the contribution of Thermal and Prompt NO mechanism was discussed. The results showed that Total EINOx varied sensitively with the variation of the flow rate of$CH_{4}$ but it was not sensitive to the variation of the diameter of inner fuel nozzle. Thermal EINOx showed the similar tendency to total EINOx and Prompt EINOx showed insensitivity to the variation of the diameter of inner fuel nozzle and the flow rate of $CH_{4}$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.50-53
• /
• 2001

In this study, gate leakage current mechanism has been analyzed for GaAs MESFET with different temperatures ranging from 27$^{\circ}C$ to 300$^{\circ}C$ . It is expected that the thermionic and field emission at the MS contact will dominate the current flow. Thermal cycle is applied to test the reliability of the device. From the results, it is proved that thermal stress gradually increases the gate leakage current at the same bias conditions and leads to the breakdown and failure mechanism which is critical in the field equipment. Finally the gate contact under the repeated thermal shock has been tested to check the quality of Schottky barrier and the current will be expressed in the analytical from to associate with the electrical characteristics of the device.