• 제목/요약/키워드: Thermal management system

검색결과 380건 처리시간 0.029초

태양광 추적기반의 파라볼릭을 이용한 태양열 집열장치 프로토타입에 관한 연구 (A Novel of Solar Heat Collection Device Prototype using Parabolic based on Solar Light Tracking)

  • 정세훈;심춘보;박성균;김종호
    • 한국전자통신학회논문지
    • /
    • 제11권4호
    • /
    • pp.411-420
    • /
    • 2016
  • 석탄과 석유를 대신할 새로운 대체 에너지의 연구 및 개발은 지난 수년간 계속해서 연구되고 있다. 최근엔 유한 에너지 가격 상승으로 인하여 무공해 신재생 에너지의 관심이 증가하고 있다. 특히 기존에 활발히 연구되고 상용화된 신재생 에너지 분야 중 태양에너지는 태양광 에너지에 주된 연구가 이루어져 있다. 그러나 태양광 에너지의 효율성은 이미 포화상태에 도달하였다. 이에 본 논문에서는 태양광이 아닌 태양열 에너지를 활용할 수 있는 태양광 추적형 파라볼릭 집열장치를 제안한다. 제안하는 태양열 집열장치는 효과적으로 태양열을 집열하기 위하여 파라볼릭 형태로 제안하고, 계절 및 시기에 따른 태양의 위치변화를 감지할 수 있도록 5축 센서 방식의 태양광 추적형 트래킹 기술을 결합한 태양열 집열장치의 프로토타입을 제안한다. 또한 집열장치의 효율적인 관리를 위하여 관리자 인터페이스를 설계 및 구현한다.

Wind Energy Interface to Grid with Load Compensation by Diode Clamped Multilevel Inverters

  • Samuel, Paulson;Naik, M. Kishore;Gupta, Rajesh;Chandra, Dinesh
    • Journal of Power Electronics
    • /
    • 제14권2호
    • /
    • pp.271-281
    • /
    • 2014
  • Fluctuating wind conditions necessitate the use of a variable speed wind turbine (VSWT) with a AC/DC/AC converter scheme in order to harvest the maximum power from the wind and to decouple the synchronous generator voltage and frequency from the grid voltage and frequency. In this paper, a combination of a three phase diode bridge rectifier (DBR) and a modified topology of the diode clamped multilevel inverter (DCMLI) has been considered as an AC/DC/AC converter. A control strategy has been proposed for the DCMLI to achieve the objective of grid interface of a wind power system together with local load compensation. A novel fixed frequency current control method is proposed for the DCMLI based on the level shifted multi carrier PWM for achieving the required control objectives with equal and uniform switching frequency operation for better control and thermal management with the modified DCMLI. The condition of the controller gain is derived to ensure the operation of the DCMLI at the fixed frequency of the carrier. The converter current injected into the distribution grid is controlled in accordance with the wind power availability. In addition, load compensation is performed as an added facility in order to free the source currents being fed from the grid of harmonic distortion, unbalance and a low power factor even though the load may be unbalanced, non-linear and of a poor power factor. The results are validated using PSCAD/EMTDC simulation studies.

대기 중 휘발성유기화합물질 및 알데하이드의 분석 신뢰도 향상에 관한 고찰 (Study on Improvement in Reliability of Analysis for VOCs and Aldehydes)

  • 이민도;이상욱;임용재;김영미;김소영;문광주;한진석;정일록
    • 한국대기환경학회지
    • /
    • 제22권4호
    • /
    • pp.468-476
    • /
    • 2006
  • Hazardous air pollutants (HAPs) have high toxicity and bioaccurnulation potentials into human body even inbsmall amount (levels of ng/$m^3$). As the levels of HAPs might be controversial, it has been become essential to establish the analysis method for correct results. In this study, various analysis methods of VOCs and Aldehydes were compared in order to select the proper methods in our condition. Sampling and analysis method of VOCs were followed to EPA TO-14a and TO-17. VOCs were collected in absorption tube and separated by thermal desorption unit then analyzed by GC/MSD. Aldehydes were sampled in DNPH-cartridge and extracted into solution then analyzed by HPLC as the same condition of EPA TO-13a. This study also shows the results of QA/QC system of selected methods. Some experiments could be improving the data assurance blank test, calibration check, repetition precision check, the determination of detection limit and reproducibility of the retention time. Precisions of VOCs and aldehydes were ranged in 2$\sim$9% and 1$\sim$4% RSD, respectively. Recovery rate of VOCs showed variable ranges from 60 to 133.5%. MDL of VOCs and aldehydes were 0.044$\sim$0.284 ppb and 0.14$\sim$1.02 ng, respectively.

DC 나노그리드에서 Droop제어를 적용한 80kW급 양방향 하이브리드-SiC 부스트-벅 컨버터 개발 (Development of 80kW Bi-directional Hybrid-SiC Boost-Buck Converter using Droop Control in DC Nano-grid)

  • 김연우;권민호;박성열;김민국;양대기;최세완;오성진
    • 전력전자학회논문지
    • /
    • 제22권4호
    • /
    • pp.360-368
    • /
    • 2017
  • This paper proposes the 80-kW high-efficiency bidirectional hybrid SiC boost/buck converter using droop control for DC nano-grid. The proposed converter consists of four 20-kW modules to achieve fault tolerance, ease of thermal management, and reduced component stress. Each module is constructed as a cascaded structure of the two basic bi-directional converters, namely, interleaved boost and buck converters. A six-pack hybrid SiC intelligent power module (IPM) suitable for the proposed cascaded structure is adopted for high-efficiency and compactness. The proposed converter with hybrid switching method reduces the switching loss by minimizing switching of insulated gate bipolar transistor (IGBT). Each module control achieves smooth transfer from buck to boost operation and vice versa, since current controller switchover is not necessary. Furthermore, the proposed parallel control using DC droop with secondary control, enhances the current sharing accuracy while well regulating the DC bus voltage. A 20-kW prototype of the proposed converter has been developed and verified with experiments and indicates a 99.3% maximum efficiency and 98.8% rated efficiency.

Evaluation of Body Movement during Sleep with a Thermopile, Wavelets and Neuro-fuzzy Reasoning

  • Yoon, Young-Ro;Shin, Jae-Woo;Lee, Hyun-Sook;Jose C.Principe
    • 대한의용생체공학회:의공학회지
    • /
    • 제25권1호
    • /
    • pp.5-10
    • /
    • 2004
  • 체동은 수면 분석에 있어서 중요한 변수중의 하나이다. 본 연구에서는 수면 중에 발생하는 체동을 비접촉 방식으로 검출하기 위하여 4채널의 써모파일 검출기를 구현하였으며, 써모파일 센서를 이용한 방식의 체통 검출 가능성을 확인하기 위해 열적외선 카메라를 통해 획득한 영상을 써모파일의 수학적 모델에 적용하였다 합성된 체동 신호는 Haar 웨이브렛을 이용하여 변환함으로써 체통이 발생한 시점과 움직임의 크기를 상체 및 하체로 나누어 순간 체동을 검출하였다. 또한 뉴로-퍼지 알고리즘인 ANFIS를 이용하여 발생한 체동이 상체만 움직인 것인지 또는 하체만 움직인 것인지 또는 몸 전체가 움직인 것인지에 대한 부위별 체동을 검출하였고, 총 3명의 피험자에 대해 60분간의 데이터를 획득하여 실험한 결과 순간 체동과 부위별 체통에 대해 각각 평균 96.3%와 39.2% 의 검출률을 나타냈다.

고온형 연료전지 열관리를 위한 배기가스 연소기 성능시험 (Performance Analysis of Off-Gas/Syngas Combustor for Thermal Management of High Temperature Fuel Cell System)

  • 이상민;이연화;안국영;유상석
    • 한국수소및신에너지학회논문집
    • /
    • 제21권3호
    • /
    • pp.193-200
    • /
    • 2010
  • Anode off-gas of high temperature fuel cell still contains combustible components such as hydrogen, carbon monoxide and hydrocarbon. In this study, a catalytic combustor has been applied to the high temperature fuel cell so that the combustion of anode-off gas can be boosted up. Since the performance of catalytic combustor directly depends on the combustion catalyst, this study is designed to perform the experimental investigation on the combustion characteristics of the three commercial catalysts with a different composition. Screening tests with three catalysts are preceded before the performance examination since it is necessary to determine the most suitable catalyst for design configuration of the catalytic combustor. The performance analysis shows that methane conversion rate strongly depends on gas hourly space velocity (GHSV) as well as inlet gas temperature. Additionally, the GSHV optimization results show that the optimum GHSV will be in the range between 18,000 $hr^{-1}$ and 36,000 $hr^{-1}$. It is also shown that the minimum inlet temperature of catalytic reaction of methane is from $100^{\circ}C$ to $150^{\circ}C$.

360 Wh급 퍼스널 모빌리티용 리튬이온 배터리 팩의 열전달 특성에 관한 연구 (Numerical Study on the Heat Transfer Characteristics of 360 Wh Li-ion Battery Pack for Personal Mobility)

  • 김대완;서재형;김학민;이무연
    • 한국산학기술학회논문지
    • /
    • 제18권8호
    • /
    • pp.1-7
    • /
    • 2017
  • 본 논문은 퍼스널 모빌리티에 사용되는 360 Wh급 리튬이온 배터리 팩의 성능 및 안정성 확보를 위하여 리튬이온 배터리 팩의 열전달 특성에 관하여 상용수치해석 프로그램인 ANSYS v17.0의 CFX를 이용하여 수치적으로 연구하였다. 이를 위하여 퍼스널 모빌리티에 사용되는 360 Wh급 리튬이온 배터리 팩의 배터리 셀 배열을 4가지 경우로 변경하고, 배터리 셀 홀더에 사용되는 재질과 배터리 팩 케이스에 사용되는 재질을 각각 Polypropylene, Aluminium, Magnesium alloy로 변경하였다. 그 결과 배터리 평균 온도는 배터리 셀 배열이 Model 2 일 때 가장 낮게 예측되었으며, 배터리 셀 홀더와 배터리 팩 케이스 재질 변경에 따른 배터리 평균 온도는 대부분의 경우 Aluminium 일 때 가장 낮게 예측되었다. 퍼스널 모빌리티에 사용되는 360 Wh급 리튬이온 배터리 팩의 열전달 성능은 배터리 셀 배열과 배터리 팩 케이스 재질에 많은 영향을 받았으며, 배터리 셀 배열 Model 2와 배터리 팩 케이스 재질이 Aluminium 일 때 가장 높았다.

에너지절약설계기준의 단열 변화에 따른 공동주택 실효성 검토 - 난방 및 급탕에너지 사용금액 분석 - (Review on the Effectiveness of Apartments According to Insulation Reinforcement of Energy Saving Design Standard - Energy Cost Analysis of Space Heating and Domestic Hot Water -)

  • 김지현;임희원;이현승;신우철
    • 대한건축학회논문집:구조계
    • /
    • 제36권1호
    • /
    • pp.173-178
    • /
    • 2020
  • In this study, we analyzed space heating and domestic hot water(DHW) charges from 2017 to 2018 for 151,206 households in 202 apartment complexes built from 1997 to 2016, in order to evaluate the effectiveness of Korea's insulation standards reinforcement. The applied insulation standards were revised three times(in 1987, 2001 and 2010). We used the Anderson-Darling test to review the normality of the space heating and DHW charges. As a result, each p-value was greater than 0.05 and it followed the normal distribution. The annual average space heating charges per unit area of apartments with the 1987 insulation standards were 5,237₩/㎡a in 2017 and 5,328₩/㎡a in 2018. The heating charges with the 2001 standards were 4,827₩/㎡a in 2017 and 4,817₩/㎡a in 2018. Compared to previous standards(1987 standards), heating charges decreased by 7.8% and 9.6%. Also the heating charges with the 2010 standards were 3,683₩/㎡a in 2017 and 3,734₩/㎡a in 2018. Compared to previous standards(2001 standards), heating charges decreased by 24.3% and 21.5%. On the other hand, compared to each previous standards, DHW charges were decreased by 12.2%, 13.6% or increased by 4.6%, 6.9%, which means there's no correlation between insulation standards reinforcement and DHW charges.

시설재배 상추 및 오이의 재배방식별 증발산량 (Evapotranspirations of Lettuce and Cucumber by Cropping Systems in Greenhouse)

  • 남상운;이남호;전우정;황한철;홍성구;허연정
    • 생물환경조절학회지
    • /
    • 제6권3호
    • /
    • pp.168-175
    • /
    • 1997
  • 시설재배시의 관수자동화 및 필요수량 산출에 대한 기초자료를 구축하는 것을 목적으로 우리나라에서 많이 재배되고 있는 시설재배작물인 상추와 오이를 대상으로 시설환경, 재배방식 및 생육단계별 증발산량을 실측 조사한 결과를 요약하면 다음과 같다. 상추의 생육은 NFT 재배구가 토양재배에 비하여 2배 이상 빨랐다. 오이의 생육은 펄라이트재배가 가장 좋았고 암면재배는 펄라이트재배 보다 약간 떨어졌으며 토양재배는 상당히 떨어지는 것으로 나타났다. 상추의 소비수량은 토양재배 2.62$\ell$/주, NFT 1.71$\ell$/주로 조사되었다. 오이의 소비수량은 토양재배 45.22$\ell$/주, 암면재배 27.45$\ell$/ 주, 펄라이트재배 29.06$\ell$/주로 조사되어 토양 재배쪽이 양액재배에 비하여 많은 물을 소비하는 것으로 나타났다. 상추의 평균 증발산비는 토양재배 0.96, NFT 1.37로 나타났으며, 토양재배에서는 생육단계별로 큰 차이가 없었으나 양액재배에서는 생육단계에 따라 크게 증가하는 것으로 나타났다. 오이의 평균증발산비는 토양재배 1.42, 암면재배 1.87, 펄라이트재배 2.02로 나타났으며, 생육단계에 따른 증발산비의 증가는 양액재배가 토양재배에 비하여 현저하게 큰 것으로 나타났다. 증발산량과 시설내부의 평균기온 사이에는 상관관계가 없는 것으로 나타났으나 증발산량과 증발계증발량, 일사량 및 최저습도 사이에는 고도로 유의한 상관관계를 보이는 것으로 나타났다.

  • PDF

해양환경보전과 이용·개발의 상충 분석과 해양공간계획에 대한 시사점 (Diagnosis of Conflict Problem between the Marine Environmental Conservation and Development, and Policy Implication for Marine Spatial Planning)

  • 이대인;탁대호;김귀영
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제19권3호
    • /
    • pp.227-235
    • /
    • 2016
  • 최근 해양에서 이루어지고 있는 해역이용 개발 현황 분석을 통해 입지의 적정성과 환경영향 측면에서 상충될 수 있는 대표적인 개발사례를 진단하여 해양공간계획수립의 필요성에 대한 시사점을 제공하였다. 해양 신재생에너지개발(조력 및 해상풍력), 바다골재채취, 공유수면매립, 연안골프장 조성, 온배수 및 고염수 배출, 침식영향 개발사업 등의 주요 사례 분석결과, 해당 공간이용 및 관리방향 간의 상충성이 빈발하고, 누적환경영향에 따른 해양환경과 생태계 훼손, 어장이용과 이행당사자사이의 갈등이 지속적으로 나타나고 있는 상황이다. 이러한 이유는 개발 입지 및 주변 공간영역에 대한 충분한 현황 파악이 부족하고, 공간이용과 관련된 개별법의 상호성 및 연계성 평가가 미흡한 것과 관련되어 있다. 사전예방적인 해양환경관리 정책을 강화하기 위해서는 입지 적정성과 개발규모에 대한 평가 검토를 강화해야 할 것이다. 특히, 전략환경영향평가 등 상위계획 심의단계에서 입지와 규모의 적정성에 대한 평가 시, 해양공간이용 현황, 상위계획과 지역계획간의 연계성(특히, 연안관리지역계획과 통합계획), 해양수산규제지역과 보호대상 해양생물 분포 등 핵심 평가사항을 제시하도록 하여 보다 철저한 진단이 이루어져야 할 것이다. 지속가능한 보전과 개발의 조화를 위해서는 TOP-DOWN 방식의 해양공간계획 전략(연안과 EEZ, 광역과 협역 해역 등 전체적 Zoning과 Sector 연계성을 강화, 3차원 정보 포함 등)을 마련해야 하고, 이 과정에서 체계적이고 최신의 해양공간정보 속성자료 파악 및 공유를 위한 통합 정보시스템 구축이 필요할 것으로 판단된다. 해양수산과 관련된 전 부문, 즉, 항만 어항, 수산, 연안관리, 해양환경과 생태계 분야에서 해양공간이용의 상호적이고 일관성있는 전략이 필요할 것이다.